gdb/testsuite: restore configure script

Message ID 20210622181132.2434096-1-simon.marchi@polymtl.ca
State New
Headers show
Series
  • gdb/testsuite: restore configure script
Related show

Commit Message

Eli Zaretskii via Gdb-patches June 22, 2021, 6:11 p.m.
Commit f99d1d37496f ("Remove gdb/testsuite/configure") removed
gdb/testsuite/configure, as anything gdb/testsuite/configure did could
be done by gdb/configure.

There is however one use case that popped up when this changed
propagated to downstream consumers, to run the testsuite on an already
built GDB.  In the workflow of ROCm-GDB at AMD, a GDB package is built
in a CI job.  This GDB package is then tested on different machines /
hardware configurations as part of other CI jobs.  To achieve this,
those CI jobs only configure the testsuite directory and run "make
check" with an appropriate board file.

In light of this use case, the way I see it is that gdb/testsuite could
be considered its own project.  It could be stored in a completely
different repo if we want to, it just happens to be stored inside gdb/.

Since the only downside of having gdb/testsuite/configure is that it
takes a few more seconds to run, but on the other hand it's quite useful
for some people, I propose re-adding it.

In a sense, this is revert of f99d1d37496f, but it's not a direct
git-revert, as some things have changed since.

gdb/ChangeLog:

	* configure.ac: Remove things that were moved from
	testsuite/configure.ac.
	* configure: Re-generate.

gdb/testsuite/ChangeLog:

	* configure.ac: Restore.
	* configure: Re-generate.
	* aclocal.m4: Re-generate.
	* Makefile.in (distclean): Add config.status.
	(Makefile): Adjust paths.
	(lib/pdtrace): Adjust paths.
	(config.status): Add.

Change-Id: Ic38c79485e1835712d9c99649c9dfb59667254f1
---
 gdb/configure              |   88 +-
 gdb/configure.ac           |   35 +-
 gdb/testsuite/Makefile.in  |   13 +-
 gdb/testsuite/aclocal.m4   |   37 +
 gdb/testsuite/configure    | 4806 ++++++++++++++++++++++++++++++++++++
 gdb/testsuite/configure.ac |   99 +
 6 files changed, 4957 insertions(+), 121 deletions(-)
 create mode 100644 gdb/testsuite/aclocal.m4
 create mode 100755 gdb/testsuite/configure
 create mode 100644 gdb/testsuite/configure.ac

-- 
2.32.0

Comments

Pedro Alves June 22, 2021, 6:57 p.m. | #1
On 2021-06-22 7:11 p.m., Simon Marchi via Gdb-patches wrote:
> Commit f99d1d37496f ("Remove gdb/testsuite/configure") removed

> gdb/testsuite/configure, as anything gdb/testsuite/configure did could

> be done by gdb/configure.

> 

> There is however one use case that popped up when this changed

> propagated to downstream consumers, to run the testsuite on an already

> built GDB.  In the workflow of ROCm-GDB at AMD, a GDB package is built

> in a CI job.  This GDB package is then tested on different machines /

> hardware configurations as part of other CI jobs.  To achieve this,

> those CI jobs only configure the testsuite directory and run "make

> check" with an appropriate board file.

> 

> In light of this use case, the way I see it is that gdb/testsuite could

> be considered its own project.  It could be stored in a completely

> different repo if we want to, it just happens to be stored inside gdb/.

> 

> Since the only downside of having gdb/testsuite/configure is that it

> takes a few more seconds to run, but on the other hand it's quite useful

> for some people, I propose re-adding it.

> 

> In a sense, this is revert of f99d1d37496f, but it's not a direct

> git-revert, as some things have changed since.


Thanks for doing this.

FWIW, I agree this is the right thing to do.

Perhaps it would be possible to make the testsuite/configure script finish
quicker, by having it check fewer things.  But that's something to
investigated/done separately, of course.

Pedro Alves
Eli Zaretskii via Gdb-patches June 22, 2021, 7:34 p.m. | #2
On 2021-06-22 2:57 p.m., Pedro Alves wrote:
> On 2021-06-22 7:11 p.m., Simon Marchi via Gdb-patches wrote:

>> Commit f99d1d37496f ("Remove gdb/testsuite/configure") removed

>> gdb/testsuite/configure, as anything gdb/testsuite/configure did could

>> be done by gdb/configure.

>>

>> There is however one use case that popped up when this changed

>> propagated to downstream consumers, to run the testsuite on an already

>> built GDB.  In the workflow of ROCm-GDB at AMD, a GDB package is built

>> in a CI job.  This GDB package is then tested on different machines /

>> hardware configurations as part of other CI jobs.  To achieve this,

>> those CI jobs only configure the testsuite directory and run "make

>> check" with an appropriate board file.

>>

>> In light of this use case, the way I see it is that gdb/testsuite could

>> be considered its own project.  It could be stored in a completely

>> different repo if we want to, it just happens to be stored inside gdb/.

>>

>> Since the only downside of having gdb/testsuite/configure is that it

>> takes a few more seconds to run, but on the other hand it's quite useful

>> for some people, I propose re-adding it.

>>

>> In a sense, this is revert of f99d1d37496f, but it's not a direct

>> git-revert, as some things have changed since.

> 

> Thanks for doing this.

> 

> FWIW, I agree this is the right thing to do.

> 

> Perhaps it would be possible to make the testsuite/configure script finish

> quicker, by having it check fewer things.  But that's something to

> investigated/done separately, of course.


Thanks, I'll wait for a comment from Tom Tromey, see if he spots some
mistake I made.

Simon
Eli Zaretskii via Gdb-patches July 6, 2021, 7:01 p.m. | #3
On 2021-06-22 3:34 p.m., Simon Marchi via Gdb-patches wrote:
> On 2021-06-22 2:57 p.m., Pedro Alves wrote:

>> On 2021-06-22 7:11 p.m., Simon Marchi via Gdb-patches wrote:

>>> Commit f99d1d37496f ("Remove gdb/testsuite/configure") removed

>>> gdb/testsuite/configure, as anything gdb/testsuite/configure did could

>>> be done by gdb/configure.

>>>

>>> There is however one use case that popped up when this changed

>>> propagated to downstream consumers, to run the testsuite on an already

>>> built GDB.  In the workflow of ROCm-GDB at AMD, a GDB package is built

>>> in a CI job.  This GDB package is then tested on different machines /

>>> hardware configurations as part of other CI jobs.  To achieve this,

>>> those CI jobs only configure the testsuite directory and run "make

>>> check" with an appropriate board file.

>>>

>>> In light of this use case, the way I see it is that gdb/testsuite could

>>> be considered its own project.  It could be stored in a completely

>>> different repo if we want to, it just happens to be stored inside gdb/.

>>>

>>> Since the only downside of having gdb/testsuite/configure is that it

>>> takes a few more seconds to run, but on the other hand it's quite useful

>>> for some people, I propose re-adding it.

>>>

>>> In a sense, this is revert of f99d1d37496f, but it's not a direct

>>> git-revert, as some things have changed since.

>>

>> Thanks for doing this.

>>

>> FWIW, I agree this is the right thing to do.

>>

>> Perhaps it would be possible to make the testsuite/configure script finish

>> quicker, by having it check fewer things.  But that's something to

>> investigated/done separately, of course.

> 

> Thanks, I'll wait for a comment from Tom Tromey, see if he spots some

> mistake I made.


I pushed this to master and gdb-11-branch (including ChangeLog entries).

Simon

Patch

diff --git a/gdb/configure b/gdb/configure
index a5c6fab118c5..e80f1e01e39d 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -619,14 +619,10 @@  ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_header_list=
 enable_option_checking=no
+ac_header_list=
 ac_subst_vars='LTLIBOBJS
 LIBOBJS
-NM_TRANSFORM_NAME
-GAS_TRANSFORM_NAME
-READELF_TRANSFORM_NAME
-STRIP_TRANSFORM_NAME
 GCORE_TRANSFORM_NAME
 GDB_TRANSFORM_NAME
 XSLTPROC
@@ -637,7 +633,6 @@  LIBXXHASH
 HAVE_LIBXXHASH
 CTF_DEPS
 LIBCTF
-enable_libctf
 LTLIBBABELTRACE
 LIBBABELTRACE
 HAVE_LIBBABELTRACE
@@ -668,7 +663,6 @@  GDBTKLIBS
 X_LIBS
 X_LDFLAGS
 X_CFLAGS
-subdirs
 TK_XINCLUDES
 TK_DEPS
 TK_LIBRARY
@@ -776,7 +770,7 @@  PKG_CONFIG_PATH
 PKG_CONFIG
 HAVE_NATIVE_GCORE_TARGET
 TARGET_OBS
-RPATH_ENVVAR
+subdirs
 GDB_DATADIR
 DEBUGDIR
 MAKEINFO_EXTRA_FLAGS
@@ -882,7 +876,6 @@  with_gdb_datadir
 with_relocated_sources
 with_auto_load_dir
 with_auto_load_safe_path
-enable_shared
 enable_targets
 enable_64_bit_bfd
 enable_gdbmi
@@ -963,7 +956,8 @@  DEBUGINFOD_LIBS
 YACC
 YFLAGS
 XMKMF'
-ac_subdirs_all='gdbtk'
+ac_subdirs_all='testsuite
+gdbtk'
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -1589,7 +1583,6 @@  Optional Features:
                           sometimes confusing) to the casual installer
   --enable-plugins        Enable support for plugins
   --disable-largefile     omit support for large files
-  --enable-shared         build shared libraries [default=yes]
   --enable-targets=TARGETS
                           alternative target configurations
   --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
@@ -6623,34 +6616,9 @@  _ACEOF
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_auto_load_safe_path" >&5
 $as_echo "$with_auto_load_safe_path" >&6; }
 
-# Enable shared libraries.
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then :
-  enableval=$enable_shared;
-else
-  enable_shared=yes
-fi
 
 
-# If we have shared libraries, try to set RPATH_ENVVAR reasonably,
-# such that we can find the shared libraries in the build tree.
-if test $enable_shared = no; then
-  # The variable `RPATH_ENVVAR' itself is not likely to be used on any
-  # platform.
-  RPATH_ENVVAR=RPATH_ENVVAR
-else
-  # The variable `LD_LIBRARY_PATH' is used on most platforms.
-  RPATH_ENVVAR=LD_LIBRARY_PATH
-  # The following exceptions are taken from Libtool 1.4.3.
-  case $host_os in
-    aix*)
-      if test $host_cpu != ia64; then
-        RPATH_ENVVAR=LIBPATH
-      fi ;;
-    darwin* | rhapsody*)
-      RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
-  esac
-fi
+subdirs="$subdirs testsuite"
 
 
 # Check whether to support alternative target configurations
@@ -18325,9 +18293,7 @@  $as_echo "${private_dir}" >&6; }
 	  CONFIG_OBS="${CONFIG_OBS} gdbres.o"
 	fi
 
-
-
-subdirs="$subdirs gdbtk"
+        subdirs="$subdirs gdbtk"
 
     fi
 fi
@@ -19209,7 +19175,6 @@  fi
 
 
 
-
 # If nativefile (NAT_FILE) is not set in configure.nat, we link to an
 # empty version.
 
@@ -19841,44 +19806,6 @@  ac_config_files="$ac_config_files gcore"
 
 ac_config_files="$ac_config_files Makefile gdb-gdb.gdb gdb-gdb.py doc/Makefile data-directory/Makefile"
 
-# Transform the name of some programs for the testsuite/lib/pdtrace
-# test tool.
-
-  gdb_ac_transform=`echo "$program_transform_name" | sed -e 's/\\$\\$/\\$/g'`
-  STRIP_TRANSFORM_NAME=`echo strip | sed -e "$gdb_ac_transform"`
-  if test "x$STRIP_TRANSFORM_NAME" = x; then
-     STRIP_TRANSFORM_NAME=strip
-  fi
-
-
-
-  gdb_ac_transform=`echo "$program_transform_name" | sed -e 's/\\$\\$/\\$/g'`
-  READELF_TRANSFORM_NAME=`echo readelf | sed -e "$gdb_ac_transform"`
-  if test "x$READELF_TRANSFORM_NAME" = x; then
-     READELF_TRANSFORM_NAME=readelf
-  fi
-
-
-
-  gdb_ac_transform=`echo "$program_transform_name" | sed -e 's/\\$\\$/\\$/g'`
-  GAS_TRANSFORM_NAME=`echo as | sed -e "$gdb_ac_transform"`
-  if test "x$GAS_TRANSFORM_NAME" = x; then
-     GAS_TRANSFORM_NAME=as
-  fi
-
-
-
-  gdb_ac_transform=`echo "$program_transform_name" | sed -e 's/\\$\\$/\\$/g'`
-  NM_TRANSFORM_NAME=`echo nm | sed -e "$gdb_ac_transform"`
-  if test "x$NM_TRANSFORM_NAME" = x; then
-     NM_TRANSFORM_NAME=nm
-  fi
-
-
-ac_config_files="$ac_config_files testsuite/lib/pdtrace"
-
-ac_config_files="$ac_config_files testsuite/Makefile"
-
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -20608,8 +20535,6 @@  do
     "gdb-gdb.py") CONFIG_FILES="$CONFIG_FILES gdb-gdb.py" ;;
     "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
     "data-directory/Makefile") CONFIG_FILES="$CONFIG_FILES data-directory/Makefile" ;;
-    "testsuite/lib/pdtrace") CONFIG_FILES="$CONFIG_FILES testsuite/lib/pdtrace" ;;
-    "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
 
   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
@@ -21240,7 +21165,6 @@  $as_echo "$as_me: executing $ac_file commands" >&6;}
     "depdir":C) $SHELL $ac_aux_dir/mkinstalldirs $DEPDIR ;;
     "nm.h":L) echo > stamp-nmh ;;
     "gcore":F) chmod +x gcore ;;
-    "testsuite/lib/pdtrace":F) chmod +x testsuite/lib/pdtrace ;;
 
   esac
 done # for ac_tag
diff --git a/gdb/configure.ac b/gdb/configure.ac
index 67aa628c47d4..b8c79bcac9ab 100644
--- a/gdb/configure.ac
+++ b/gdb/configure.ac
@@ -153,31 +153,7 @@  AC_DEFINE_DIR(AUTO_LOAD_SAFE_PATH, escape_dir,
 	      [Directories safe to hold auto-loaded files.])
 AC_MSG_RESULT([$with_auto_load_safe_path])
 
-# Enable shared libraries.
-AC_ARG_ENABLE(shared,
-AS_HELP_STRING([--enable-shared], [build shared libraries [default=yes]]),,
-  enable_shared=yes)
-
-# If we have shared libraries, try to set RPATH_ENVVAR reasonably,
-# such that we can find the shared libraries in the build tree.
-if test $enable_shared = no; then
-  # The variable `RPATH_ENVVAR' itself is not likely to be used on any
-  # platform.
-  RPATH_ENVVAR=RPATH_ENVVAR
-else
-  # The variable `LD_LIBRARY_PATH' is used on most platforms.
-  RPATH_ENVVAR=LD_LIBRARY_PATH
-  # The following exceptions are taken from Libtool 1.4.3.
-  case $host_os in
-    aix*)
-      if test $host_cpu != ia64; then
-        RPATH_ENVVAR=LIBPATH
-      fi ;;
-    darwin* | rhapsody*)
-      RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
-  esac
-fi
-AC_SUBST(RPATH_ENVVAR)
+AC_CONFIG_SUBDIRS(testsuite)
 
 # Check whether to support alternative target configurations
 AC_ARG_ENABLE(targets,
@@ -2195,7 +2171,6 @@  else
   LIBCTF=
   CTF_DEPS=
 fi
-AC_SUBST(enable_libctf)
 AC_SUBST(LIBCTF)
 AC_SUBST(CTF_DEPS)
 
@@ -2261,13 +2236,5 @@  GDB_AC_TRANSFORM([gdb], [GDB_TRANSFORM_NAME])
 GDB_AC_TRANSFORM([gcore], [GCORE_TRANSFORM_NAME])
 AC_CONFIG_FILES([gcore], [chmod +x gcore])
 AC_CONFIG_FILES([Makefile gdb-gdb.gdb gdb-gdb.py doc/Makefile data-directory/Makefile])
-# Transform the name of some programs for the testsuite/lib/pdtrace
-# test tool.
-GDB_AC_TRANSFORM(strip, STRIP_TRANSFORM_NAME)
-GDB_AC_TRANSFORM(readelf, READELF_TRANSFORM_NAME)
-GDB_AC_TRANSFORM(as, GAS_TRANSFORM_NAME)
-GDB_AC_TRANSFORM(nm, NM_TRANSFORM_NAME)
-AC_CONFIG_FILES([testsuite/lib/pdtrace], [chmod +x testsuite/lib/pdtrace])
-AC_CONFIG_FILES([testsuite/Makefile])
 
 AC_OUTPUT
diff --git a/gdb/testsuite/Makefile.in b/gdb/testsuite/Makefile.in
index 2c0482cef1b0..20cb3dae2ed1 100644
--- a/gdb/testsuite/Makefile.in
+++ b/gdb/testsuite/Makefile.in
@@ -348,14 +348,17 @@  clean mostlyclean:
 
 distclean maintainer-clean realclean: clean
 	-rm -f *~ core
-	-rm -f Makefile *-init.exp
+	-rm -f Makefile config.status *-init.exp
 	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
 
-Makefile : Makefile.in ../config.status $(host_makefile_frag)
-	cd .. && $(SHELL) ./config.status testsuite/Makefile
+Makefile : Makefile.in config.status $(host_makefile_frag)
+	$(SHELL) config.status Makefile
 
-lib/pdtrace: pdtrace.in ../config.status
-	cd .. && $(SHELL) ./config.status testsuite/lib/pdtrace
+lib/pdtrace: pdtrace.in config.status
+	$(SHELL) config.status lib/pdtrace
+
+config.status: configure
+	$(SHELL) config.status --recheck
 
 TAGS: force
 	find $(srcdir) -name '*.exp' -print | \
diff --git a/gdb/testsuite/aclocal.m4 b/gdb/testsuite/aclocal.m4
new file mode 100644
index 000000000000..c5d3ba527a76
--- /dev/null
+++ b/gdb/testsuite/aclocal.m4
@@ -0,0 +1,37 @@ 
+m4_include(../../config/acx.m4)
+m4_include(../../config/override.m4)
+m4_include(../../config/enable.m4)
+m4_include(../transform.m4)
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
diff --git a/gdb/testsuite/configure b/gdb/testsuite/configure
new file mode 100755
index 000000000000..3b0d4ed8ad35
--- /dev/null
+++ b/gdb/testsuite/configure
@@ -0,0 +1,4806 @@ 
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+PACKAGE_URL=
+
+ac_unique_file="gdb.base"
+enable_option_checking=no
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+NM_TRANSFORM_NAME
+GAS_TRANSFORM_NAME
+READELF_TRANSFORM_NAME
+STRIP_TRANSFORM_NAME
+EXTRA_RULES
+EGREP
+GREP
+CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+RPATH_ENVVAR
+enable_libctf
+subdirs
+target_noncanonical
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_gdbtk
+enable_libctf
+enable_shared
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+ac_subdirs_all='gdb.gdbtk'
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+  --target=TARGET   configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-gtk            enable gdbtk graphical user interface (GUI)
+  --enable-libctf         Handle .ctf type-info sections [default=yes]
+  --enable-shared         build shared libraries deault=yes
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if ${ac_cv_target+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$target_alias" = x; then
+  ac_cv_target=$ac_cv_host
+else
+  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+ case ${build_alias} in
+  "") build_noncanonical=${build} ;;
+  *) build_noncanonical=${build_alias} ;;
+esac
+
+ case ${host_alias} in
+  "") host_noncanonical=${build_noncanonical} ;;
+  *) host_noncanonical=${host_alias} ;;
+esac
+
+ case ${target_alias} in
+  "") target_noncanonical=${host_noncanonical} ;;
+  *) target_noncanonical=${target_alias} ;;
+esac
+
+
+
+
+# Enable gdbtk.
+# Check whether --enable-gdbtk was given.
+if test "${enable_gdbtk+set}" = set; then :
+  enableval=$enable_gdbtk;
+else
+  if test -d $srcdir/../gdbtk && test -d $srcdir/gdb.gdbtk; then
+    enable_gdbtk=yes
+  else
+    enable_gdbtk=no
+  fi
+fi
+
+# We unconditionally disable gdbtk tests on selected platforms.
+case $host_os in
+  go32* | windows*)
+    enable_gdbtk=no ;;
+esac
+
+# Add gdbtk tests when appropriate.
+if test $enable_gdbtk = yes; then
+
+
+subdirs="$subdirs gdb.gdbtk"
+
+fi
+
+ # Check whether --enable-libctf was given.
+if test "${enable_libctf+set}" = set; then :
+  enableval=$enable_libctf;
+      case "$enableval" in
+       yes|no) ;;
+       *) as_fn_error $? "Argument to enable/disable libctf must be yes or no" "$LINENO" 5 ;;
+      esac
+
+else
+  enable_libctf=yes
+fi
+
+
+
+
+# Enable shared libraries.
+# Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared;
+else
+  enable_shared=yes
+fi
+
+
+# If we have shared libraries, try to set RPATH_ENVVAR reasonably,
+# such that we can find the shared libraries in the build tree.
+if test $enable_shared = no; then
+  # The variable `RPATH_ENVVAR' itself is not likely to be used on any
+  # platform.
+  RPATH_ENVVAR=RPATH_ENVVAR
+else
+  # The variable `LD_LIBRARY_PATH' is used on most platforms.
+  RPATH_ENVVAR=LD_LIBRARY_PATH
+  # The following exceptions are taken from Libtool 1.4.3.
+  case $host_os in
+    aix*)
+      if test $host_cpu != ia64; then
+        RPATH_ENVVAR=LIBPATH
+      fi ;;
+    darwin* | rhapsody*)
+      RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+  esac
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in pthread.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "pthread.h" "ac_cv_header_pthread_h" "$ac_includes_default"
+if test "x$ac_cv_header_pthread_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_PTHREAD_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+if test "${build}" = "${host}" -a "${host}" = "${target}"; then
+   case "${host}" in
+     *gnu*)
+       EXTRA_RULES=read1
+       ;;
+   esac
+fi
+
+
+# Transform the name of some programs and generate the lib/pdtrace
+# test tool.
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+
+  gdb_ac_transform=`echo "$program_transform_name" | sed -e 's/\\$\\$/\\$/g'`
+  STRIP_TRANSFORM_NAME=`echo strip | sed -e "$gdb_ac_transform"`
+  if test "x$STRIP_TRANSFORM_NAME" = x; then
+     STRIP_TRANSFORM_NAME=strip
+  fi
+
+
+
+  gdb_ac_transform=`echo "$program_transform_name" | sed -e 's/\\$\\$/\\$/g'`
+  READELF_TRANSFORM_NAME=`echo readelf | sed -e "$gdb_ac_transform"`
+  if test "x$READELF_TRANSFORM_NAME" = x; then
+     READELF_TRANSFORM_NAME=readelf
+  fi
+
+
+
+  gdb_ac_transform=`echo "$program_transform_name" | sed -e 's/\\$\\$/\\$/g'`
+  GAS_TRANSFORM_NAME=`echo as | sed -e "$gdb_ac_transform"`
+  if test "x$GAS_TRANSFORM_NAME" = x; then
+     GAS_TRANSFORM_NAME=as
+  fi
+
+
+
+  gdb_ac_transform=`echo "$program_transform_name" | sed -e 's/\\$\\$/\\$/g'`
+  NM_TRANSFORM_NAME=`echo nm | sed -e "$gdb_ac_transform"`
+  if test "x$NM_TRANSFORM_NAME" = x; then
+     NM_TRANSFORM_NAME=nm
+  fi
+
+
+ac_config_files="$ac_config_files lib/pdtrace"
+
+ac_config_files="$ac_config_files Makefile"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "lib/pdtrace") CONFIG_FILES="$CONFIG_FILES lib/pdtrace" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+
+  esac
+
+
+  case $ac_file$ac_mode in
+    "lib/pdtrace":F) chmod +x lib/pdtrace ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+
+#
+# CONFIG_SUBDIRS section.
+#
+if test "$no_recursion" != yes; then
+
+  # Remove --cache-file, --srcdir, and --disable-option-checking arguments
+  # so they do not pile up.
+  ac_sub_configure_args=
+  ac_prev=
+  eval "set x $ac_configure_args"
+  shift
+  for ac_arg
+  do
+    if test -n "$ac_prev"; then
+      ac_prev=
+      continue
+    fi
+    case $ac_arg in
+    -cache-file | --cache-file | --cache-fil | --cache-fi \
+    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+      ac_prev=cache_file ;;
+    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
+    | --c=*)
+      ;;
+    --config-cache | -C)
+      ;;
+    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+      ac_prev=srcdir ;;
+    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+      ;;
+    -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+      ac_prev=prefix ;;
+    -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+      ;;
+    --disable-option-checking)
+      ;;
+    *)
+      case $ac_arg in
+      *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      esac
+      as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
+    esac
+  done
+
+  # Always prepend --prefix to ensure using the same prefix
+  # in subdir configurations.
+  ac_arg="--prefix=$prefix"
+  case $ac_arg in
+  *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+  esac
+  ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
+
+  # Pass --silent
+  if test "$silent" = yes; then
+    ac_sub_configure_args="--silent $ac_sub_configure_args"
+  fi
+
+  # Always prepend --disable-option-checking to silence warnings, since
+  # different subdirs can have different --enable and --with options.
+  ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
+
+  ac_popdir=`pwd`
+  for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
+
+    # Do not complain, so a configure script can configure whichever
+    # parts of a large source tree are present.
+    test -d "$srcdir/$ac_dir" || continue
+
+    ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
+    $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
+    $as_echo "$ac_msg" >&6
+    as_dir="$ac_dir"; as_fn_mkdir_p
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+    cd "$ac_dir"
+
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      ac_sub_configure=$ac_srcdir/configure.gnu
+    elif test -f "$ac_srcdir/configure"; then
+      ac_sub_configure=$ac_srcdir/configure
+    elif test -f "$ac_srcdir/configure.in"; then
+      # This should be Cygnus configure.
+      ac_sub_configure=$ac_aux_dir/configure
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no configuration information is in $ac_dir" >&5
+$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
+      ac_sub_configure=
+    fi
+
+    # The recursion is here.
+    if test -n "$ac_sub_configure"; then
+      # Make the cache file name correct relative to the subdirectory.
+      case $cache_file in
+      [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
+      *) # Relative name.
+	ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
+      esac
+
+      { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
+$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
+      # The eval makes quoting arguments work.
+      eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
+	   --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
+	as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
+    fi
+
+    cd "$ac_popdir"
+  done
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/gdb/testsuite/configure.ac b/gdb/testsuite/configure.ac
new file mode 100644
index 000000000000..b15dbcb1bbdf
--- /dev/null
+++ b/gdb/testsuite/configure.ac
@@ -0,0 +1,99 @@ 
+#                                                       -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+# Copyright 2002-2021 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+AC_INIT
+AC_CONFIG_SRCDIR([gdb.base])
+
+AC_CANONICAL_BUILD
+AC_CANONICAL_HOST
+AC_CANONICAL_TARGET
+
+ACX_NONCANONICAL_TARGET
+
+# Enable gdbtk.
+AC_ARG_ENABLE(gdbtk,
+[  --enable-gtk            enable gdbtk graphical user interface (GUI)],,
+  [if test -d $srcdir/../gdbtk && test -d $srcdir/gdb.gdbtk; then
+    enable_gdbtk=yes
+  else
+    enable_gdbtk=no
+  fi])
+# We unconditionally disable gdbtk tests on selected platforms.
+case $host_os in
+  go32* | windows*)
+    enable_gdbtk=no ;;
+esac
+
+# Add gdbtk tests when appropriate.
+if test $enable_gdbtk = yes; then
+   AC_CONFIG_SUBDIRS(gdb.gdbtk)
+fi
+
+GCC_ENABLE([libctf], [yes], [], [Handle .ctf type-info sections])
+AC_SUBST(enable_libctf)
+
+# Enable shared libraries.
+AC_ARG_ENABLE(shared,
+[  --enable-shared         build shared libraries [deault=yes]],,
+  enable_shared=yes)
+
+# If we have shared libraries, try to set RPATH_ENVVAR reasonably,
+# such that we can find the shared libraries in the build tree.
+if test $enable_shared = no; then
+  # The variable `RPATH_ENVVAR' itself is not likely to be used on any
+  # platform.
+  RPATH_ENVVAR=RPATH_ENVVAR
+else
+  # The variable `LD_LIBRARY_PATH' is used on most platforms.
+  RPATH_ENVVAR=LD_LIBRARY_PATH
+  # The following exceptions are taken from Libtool 1.4.3.
+  case $host_os in
+    aix*)
+      if test $host_cpu != ia64; then
+        RPATH_ENVVAR=LIBPATH
+      fi ;;
+    darwin* | rhapsody*)
+      RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+  esac
+fi
+AC_SUBST(RPATH_ENVVAR)
+
+AC_CHECK_HEADERS(pthread.h)
+
+AC_EXEEXT
+
+if test "${build}" = "${host}" -a "${host}" = "${target}"; then
+   case "${host}" in
+     *gnu*)
+       EXTRA_RULES=read1
+       ;;
+   esac
+fi
+AC_SUBST(EXTRA_RULES)
+
+# Transform the name of some programs and generate the lib/pdtrace
+# test tool.
+AC_ARG_PROGRAM
+GDB_AC_TRANSFORM(strip, STRIP_TRANSFORM_NAME)
+GDB_AC_TRANSFORM(readelf, READELF_TRANSFORM_NAME)
+GDB_AC_TRANSFORM(as, GAS_TRANSFORM_NAME)
+GDB_AC_TRANSFORM(nm, NM_TRANSFORM_NAME)
+AC_CONFIG_FILES([lib/pdtrace], [chmod +x lib/pdtrace])
+AC_CONFIG_FILES([Makefile])
+
+AC_OUTPUT