[gas/ARM] Clean up selection of feature bits

Message ID 914bc655-42fe-c31a-6a60-9e205c97c2a0@foss.arm.com
State New
Headers show
Series
  • [gas/ARM] Clean up selection of feature bits
Related show

Commit Message

Thomas Preudhomme Feb. 27, 2018, 1:59 p.m.
I've always found the code in ARM backend of gas to control what
CPU/architecture and FPU are selected by the user and to support
autodetection of features complex and confusing. Chief among the
issues I have with that code is the lack of comments to explain
the meaning of the various variables. This patch addresses that
and much more:

- add comments to explain meaning of all arm_feature_set variables
- keep track of currently selected CPU, extensions and FPU in a separate
   set of new variables
- make naming of variable more consistent
- remove dead code
- simplify handling of extensions

The overall approach is as follows:

* restrict m*_opt variable to hold the feature bits of the
   corresponding mcpu/march/mfpu command-line options
* record selected CPU, extensions and FPU in new selected_* during
   md_begin
* whenever a .cpu/.arch/.arch_extension/.fpu directive is met, update
   the corresponding selected_* variables (eg. selected_arch, then
   selected_cpu for a .cpu or .arch directive) and then finally
   cpu_variant from them
* pass extension feature set pointer by value to arm_parse_extension
   since it's only ever called from arm_parse_cpu and arm_parse_arch
   which allocate the extension feature set themselves
* likewise, remove allocation from s_arm_arch_extension since the use
   of arm_feature_set structure for selected_ext rather than a pointer
   alleviate the need for it
* in autodetection mode, only set all CPU fits in cpu_variant but leave
   selected_cpu* variables unset
* in md_begin, remove dead "else if" to set a default FPU when no FPU
   was selected. Setting a default FPU based on CPU as did the code
   before it turn dead should be based on the default FPU field of the
   CPU and architecture table as will be done in a separate patch. Logic
   is wrong anyway since it sets VFP2 as default FPU for Armv6-M and
   Armv7-M

Hopefully that should be enough to understand the change but if not feel
free to ask questions about the patch. While I believe the new code is
easier to understand, it remains complex and the old one was even more
complex so the change is difficult to understand.

ChangeLog entry is as follows:

*** gas/ChangeLog ***

2018-02-21  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (cpu_variant, arm_arch_used, thumb_arch_used,
	legacy_cpu, legacy_fpu, mcpu_cpu_opt, dyn_mcpu_ext_opt,
	mcpu_fpu_opt, march_cpu_opt, dyn_march_ext_opt, march_fpu_opt,
	mfpu_opt, object_arch, selected_cpu): Comment meaning of variables.
	(dyn_mcpu_ext_opt): Also rename into ...
	(mcpu_ext_opt): This.
	(dyn_march_ext_opt): Also rename into ...
	(march_ext_opt): This.
	(object_arch): Also rename into ...
	(selected_object_arch): This and make it a plain arm_feature_set
	structure.
	(selected_arch, selected_ext, selected_fpu): New static variables.
	(do_bx): Adapt to change in name and type of object_arch.
	(md_begin): Set selected_arch rather than mcpu_cpu_opt, selected_ext
	rather than dyn_mcpu_ext_opt and selected_fpu rather than mfpu_opt.
	Remove dead code to set default FPU if architecture version is greater
	than 5.  Set all CPU bits of cpu_variant directly in autodection
	leaving mcpu_cpu_opt, selected_arch and selected_cpu unset.
	(arm_parse_extension): Take extension feature set pointer
	parameter by value rather than by pointer.  Remove allocation
	code.  Adapt code accordingly.
	(arm_parse_cpu): Adapt to variable renaming and changes in
	arm_parse_extension () signature.
	(arm_parse_arch): Likewise.
	(aeabi_set_public_attributes): Also set selected_arch and selected_ext
	in addition to selected_cpu.  Set flags_arch and flags_ext from them
	instead of selected_cpu.  Adapt to variables renaming and type change.
	(arm_md_post_relax): Adapt to variable renaming.
	(s_arm_cpu): Set selcted_cpu_cpu and selected_ext instead of
	mcpu_cpu_opt and dyn_mcpu_ext_opt.  Set selected_cpu from them
	and cpu_variant from selected_cpu and selected_fpu.
	(s_arm_arch): Likewise.
	(s_arm_object_arch): Adapt to variable renaming.
	(s_arm_arch_extension): Use ARM_CPU_IS_ANY instead of checking
	feature set against arm_any.  Check selected_arch rather than
	*mcpu_cpu_opt.  Set selected_ext rather than *dyn_mcpu_ext_opt and
	remove allocation code.
	(s_arm_fpu): Set selected_fpu instead of mfpu_opt.  Set all CPU
	feature bits if in autodetection mode.

Testing: Built binutils targeting arm-none-eabi and testsuite shows no
regression.

Ok for master?

Best regards,

Thomas

Comments

Nick Clifton March 1, 2018, 10:58 a.m. | #1
Hi Thomas,

> I've always found the code in ARM backend of gas to control what

> CPU/architecture and FPU are selected by the user and to support

> autodetection of features complex and confusing. Chief among the

> issues I have with that code is the lack of comments to explain

> the meaning of the various variables. This patch addresses that

> and much more:


Wow - thank you for doing this.

My first thought actually was whether this improvement ought to be generalized
and used for other targets, and not just ARM.  I think however that there is
probably too much target specific knowledge to be handled, but it might be worth
thinking about for the future.

> *** gas/ChangeLog ***

> 2018-02-21  Thomas Preud'homme  <thomas.preudhomme@arm.com>

> 

>     * config/tc-arm.c (cpu_variant, arm_arch_used, thumb_arch_used,

>     legacy_cpu, legacy_fpu, mcpu_cpu_opt, dyn_mcpu_ext_opt,

>     mcpu_fpu_opt, march_cpu_opt, dyn_march_ext_opt, march_fpu_opt,

>     mfpu_opt, object_arch, selected_cpu): Comment meaning of variables.

>     (dyn_mcpu_ext_opt): Also rename into ...

>     (mcpu_ext_opt): This.

>     (dyn_march_ext_opt): Also rename into ...

>     (march_ext_opt): This.

>     (object_arch): Also rename into ...

>     (selected_object_arch): This and make it a plain arm_feature_set

>     structure.

>     (selected_arch, selected_ext, selected_fpu): New static variables.

>     (do_bx): Adapt to change in name and type of object_arch.

>     (md_begin): Set selected_arch rather than mcpu_cpu_opt, selected_ext

>     rather than dyn_mcpu_ext_opt and selected_fpu rather than mfpu_opt.

>     Remove dead code to set default FPU if architecture version is greater

>     than 5.  Set all CPU bits of cpu_variant directly in autodection

>     leaving mcpu_cpu_opt, selected_arch and selected_cpu unset.

>     (arm_parse_extension): Take extension feature set pointer

>     parameter by value rather than by pointer.  Remove allocation

>     code.  Adapt code accordingly.

>     (arm_parse_cpu): Adapt to variable renaming and changes in

>     arm_parse_extension () signature.

>     (arm_parse_arch): Likewise.

>     (aeabi_set_public_attributes): Also set selected_arch and selected_ext

>     in addition to selected_cpu.  Set flags_arch and flags_ext from them

>     instead of selected_cpu.  Adapt to variables renaming and type change.

>     (arm_md_post_relax): Adapt to variable renaming.

>     (s_arm_cpu): Set selcted_cpu_cpu and selected_ext instead of

>     mcpu_cpu_opt and dyn_mcpu_ext_opt.  Set selected_cpu from them

>     and cpu_variant from selected_cpu and selected_fpu.

>     (s_arm_arch): Likewise.

>     (s_arm_object_arch): Adapt to variable renaming.

>     (s_arm_arch_extension): Use ARM_CPU_IS_ANY instead of checking

>     feature set against arm_any.  Check selected_arch rather than

>     *mcpu_cpu_opt.  Set selected_ext rather than *dyn_mcpu_ext_opt and

>     remove allocation code.

>     (s_arm_fpu): Set selected_fpu instead of mfpu_opt.  Set all CPU

>     feature bits if in autodetection mode.


Approved - please apply.

Cheers
  Nick
Thomas Preudhomme March 1, 2018, 4:27 p.m. | #2
Hi Nick,

Thank you for the approval and the quick review. I've noticed one more issue in 
mark_feature_used which was referring to selected architecture but testing 
cpu_variant (which only represents what is allowed). I've considered this to be 
an obvious fix so have committed the patch with that comment fix.

You'll find attached the patch I've committed. As I said, the only difference is 
in mark_feature_used so just search for that function if you want to double check.

Updated ChangeLog entry is as follows:

*** gas/ChangeLog ***

2018-03-01  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (cpu_variant, arm_arch_used, thumb_arch_used,
	legacy_cpu, legacy_fpu, mcpu_cpu_opt, dyn_mcpu_ext_opt,
	mcpu_fpu_opt, march_cpu_opt, dyn_march_ext_opt, march_fpu_opt,
	mfpu_opt, object_arch, selected_cpu): Comment meaning of variables.
	(dyn_mcpu_ext_opt): Also rename into ...
	(mcpu_ext_opt): This.
	(dyn_march_ext_opt): Also rename into ...
	(march_ext_opt): This.
	(object_arch): Also rename into ...
	(selected_object_arch): This and make it a plain arm_feature_set
	structure.
	(selected_arch, selected_ext, selected_fpu): New static variables.
	(mark_feature_used): Fix comments, feature is marked as used iff
	it is currently allowed.
	(do_bx): Adapt to change in name and type of object_arch.
	(md_begin): Set selected_arch rather than mcpu_cpu_opt, selected_ext
	rather than dyn_mcpu_ext_opt and selected_fpu rather than mfpu_opt.
	Remove dead code to set default FPU if architecture version is greater
	than 5.  Set all CPU bits of cpu_variant directly in autodection
	leaving mcpu_cpu_opt, selected_arch and selected_cpu unset.
	(arm_parse_extension): Take extension feature set pointer
	parameter by value rather than by pointer.  Remove allocation
	code.  Adapt code accordingly.
	(arm_parse_cpu): Adapt to variable renaming and changes in
	arm_parse_extension () signature.
	(arm_parse_arch): Likewise.
	(aeabi_set_public_attributes): Also set selected_arch and selected_ext
	in addition to selected_cpu.  Set flags_arch and flags_ext from them
	instead of selected_cpu.  Adapt to variables renaming and type change.
	(arm_md_post_relax): Adapt to variable renaming.
	(s_arm_cpu): Set selcted_cpu_cpu and selected_ext instead of
	mcpu_cpu_opt and dyn_mcpu_ext_opt.  Set selected_cpu from them
	and cpu_variant from selected_cpu and selected_fpu.
	(s_arm_arch): Likewise.
	(s_arm_object_arch): Adapt to variable renaming.
	(s_arm_arch_extension): Use ARM_CPU_IS_ANY instead of checking
	feature set against arm_any.  Check selected_arch rather than
	*mcpu_cpu_opt.  Set selected_ext rather than *dyn_mcpu_ext_opt and
	remove allocation code.
	(s_arm_fpu): Set selected_fpu instead of mfpu_opt.  Set all CPU
	feature bits if in autodetection mode.

Best regards,

Thomas

On 01/03/18 10:58, Nick Clifton wrote:
> Hi Thomas,

> 

>> I've always found the code in ARM backend of gas to control what

>> CPU/architecture and FPU are selected by the user and to support

>> autodetection of features complex and confusing. Chief among the

>> issues I have with that code is the lack of comments to explain

>> the meaning of the various variables. This patch addresses that

>> and much more:

> 

> Wow - thank you for doing this.

> 

> My first thought actually was whether this improvement ought to be generalized

> and used for other targets, and not just ARM.  I think however that there is

> probably too much target specific knowledge to be handled, but it might be worth

> thinking about for the future.

> 

>> *** gas/ChangeLog ***

>> 2018-02-21  Thomas Preud'homme  <thomas.preudhomme@arm.com>

>>

>>      * config/tc-arm.c (cpu_variant, arm_arch_used, thumb_arch_used,

>>      legacy_cpu, legacy_fpu, mcpu_cpu_opt, dyn_mcpu_ext_opt,

>>      mcpu_fpu_opt, march_cpu_opt, dyn_march_ext_opt, march_fpu_opt,

>>      mfpu_opt, object_arch, selected_cpu): Comment meaning of variables.

>>      (dyn_mcpu_ext_opt): Also rename into ...

>>      (mcpu_ext_opt): This.

>>      (dyn_march_ext_opt): Also rename into ...

>>      (march_ext_opt): This.

>>      (object_arch): Also rename into ...

>>      (selected_object_arch): This and make it a plain arm_feature_set

>>      structure.

>>      (selected_arch, selected_ext, selected_fpu): New static variables.

>>      (do_bx): Adapt to change in name and type of object_arch.

>>      (md_begin): Set selected_arch rather than mcpu_cpu_opt, selected_ext

>>      rather than dyn_mcpu_ext_opt and selected_fpu rather than mfpu_opt.

>>      Remove dead code to set default FPU if architecture version is greater

>>      than 5.  Set all CPU bits of cpu_variant directly in autodection

>>      leaving mcpu_cpu_opt, selected_arch and selected_cpu unset.

>>      (arm_parse_extension): Take extension feature set pointer

>>      parameter by value rather than by pointer.  Remove allocation

>>      code.  Adapt code accordingly.

>>      (arm_parse_cpu): Adapt to variable renaming and changes in

>>      arm_parse_extension () signature.

>>      (arm_parse_arch): Likewise.

>>      (aeabi_set_public_attributes): Also set selected_arch and selected_ext

>>      in addition to selected_cpu.  Set flags_arch and flags_ext from them

>>      instead of selected_cpu.  Adapt to variables renaming and type change.

>>      (arm_md_post_relax): Adapt to variable renaming.

>>      (s_arm_cpu): Set selcted_cpu_cpu and selected_ext instead of

>>      mcpu_cpu_opt and dyn_mcpu_ext_opt.  Set selected_cpu from them

>>      and cpu_variant from selected_cpu and selected_fpu.

>>      (s_arm_arch): Likewise.

>>      (s_arm_object_arch): Adapt to variable renaming.

>>      (s_arm_arch_extension): Use ARM_CPU_IS_ANY instead of checking

>>      feature set against arm_any.  Check selected_arch rather than

>>      *mcpu_cpu_opt.  Set selected_ext rather than *dyn_mcpu_ext_opt and

>>      remove allocation code.

>>      (s_arm_fpu): Set selected_fpu instead of mfpu_opt.  Set all CPU

>>      feature bits if in autodetection mode.

> 

> Approved - please apply.

> 

> Cheers

>    Nick

> 

>
diff --git a/gas/config/tc-arm.c b/gas/config/tc-arm.c
index d6a923d9b9853f30b47dd8ac7817b1e4d1cfdbd2..ac403cc74e9871721f1b522239997241eddefb4f 100644
--- a/gas/config/tc-arm.c
+++ b/gas/config/tc-arm.c
@@ -123,7 +123,12 @@ enum arm_float_abi
 
 #define streq(a, b)	      (strcmp (a, b) == 0)
 
+/* Current set of feature bits available (CPU+FPU).  Different from
+   selected_cpu + selected_fpu in case of autodetection since the CPU
+   feature bits are then all set.  */
 static arm_feature_set cpu_variant;
+/* Feature bits used in each execution state.  Used to set build attribute
+   (in particular Tag_*_ISA_use) in CPU autodetection mode.  */
 static arm_feature_set arm_arch_used;
 static arm_feature_set thumb_arch_used;
 
@@ -143,17 +148,24 @@ bfd_boolean codecomposer_syntax = FALSE;
 /* Variables that we set while parsing command-line options.  Once all
    options have been read we re-process these values to set the real
    assembly flags.  */
-static const arm_feature_set *  legacy_cpu = NULL;
-static const arm_feature_set *  legacy_fpu = NULL;
-
-static const arm_feature_set *  mcpu_cpu_opt = NULL;
-static arm_feature_set *        dyn_mcpu_ext_opt = NULL;
-static const arm_feature_set *  mcpu_fpu_opt = NULL;
-static const arm_feature_set *  march_cpu_opt = NULL;
-static arm_feature_set *        dyn_march_ext_opt = NULL;
-static const arm_feature_set *  march_fpu_opt = NULL;
-static const arm_feature_set *  mfpu_opt = NULL;
-static const arm_feature_set *  object_arch = NULL;
+
+/* CPU and FPU feature bits set for legacy CPU and FPU options (eg. -marm1
+   instead of -mcpu=arm1).  */
+static const arm_feature_set *legacy_cpu = NULL;
+static const arm_feature_set *legacy_fpu = NULL;
+
+/* CPU, extension and FPU feature bits selected by -mcpu.  */
+static const arm_feature_set *mcpu_cpu_opt = NULL;
+static arm_feature_set *mcpu_ext_opt = NULL;
+static const arm_feature_set *mcpu_fpu_opt = NULL;
+
+/* CPU, extension and FPU feature bits selected by -march.  */
+static const arm_feature_set *march_cpu_opt = NULL;
+static arm_feature_set *march_ext_opt = NULL;
+static const arm_feature_set *march_fpu_opt = NULL;
+
+/* Feature bits selected by -mfpu.  */
+static const arm_feature_set *mfpu_opt = NULL;
 
 /* Constants for known architecture features.  */
 static const arm_feature_set fpu_default = FPU_DEFAULT;
@@ -302,8 +314,20 @@ static const arm_feature_set fpu_neon_ext_dotprod =
   ARM_FEATURE_COPROC (FPU_NEON_EXT_DOTPROD);
 
 static int mfloat_abi_opt = -1;
-/* Record user cpu selection for object attributes.  */
+/* Architecture feature bits selected by the last -mcpu/-march or .cpu/.arch
+   directive.  */
+static arm_feature_set selected_arch = ARM_ARCH_NONE;
+/* Extension feature bits selected by the last -mcpu/-march or .arch_extension
+   directive.  */
+static arm_feature_set selected_ext = ARM_ARCH_NONE;
+/* Feature bits selected by the last -mcpu/-march or by the combination of the
+   last .cpu/.arch directive .arch_extension directives since that
+   directive.  */
 static arm_feature_set selected_cpu = ARM_ARCH_NONE;
+/* FPU feature bits selected by the last -mfpu or .fpu directive.  */
+static arm_feature_set selected_fpu = FPU_NONE;
+/* Feature bits selected by the last .object_arch directive.  */
+static arm_feature_set selected_object_arch = ARM_ARCH_NONE;
 /* Must be long enough to hold any of the names in arm_cpus.  */
 static char selected_cpu_name[20];
 
@@ -6160,17 +6184,16 @@ record_feature_use (const arm_feature_set *feature)
     ARM_MERGE_FEATURE_SETS (arm_arch_used, arm_arch_used, *feature);
 }
 
-/* If the given feature available in the selected CPU, mark it as used.
-   Returns TRUE iff feature is available.  */
+/* If the given feature is currently allowed, mark it as used and return TRUE.
+   Return FALSE otherwise.  */
 static bfd_boolean
 mark_feature_used (const arm_feature_set *feature)
 {
-  /* Ensure the option is valid on the current architecture.  */
+  /* Ensure the option is currently allowed.  */
   if (!ARM_CPU_HAS_FEATURE (cpu_variant, *feature))
     return FALSE;
 
-  /* Add the appropriate architecture feature for the barrier option used.
-     */
+  /* Add the appropriate architecture feature for the barrier option used.  */
   record_feature_use (feature);
 
   return TRUE;
@@ -8610,7 +8633,8 @@ do_bx (void)
   /* Output R_ARM_V4BX relocations if is an EABI object that looks like
      it is for ARMv4t or earlier.  */
   want_reloc = !ARM_CPU_HAS_FEATURE (selected_cpu, arm_ext_v5);
-  if (object_arch && !ARM_CPU_HAS_FEATURE (*object_arch, arm_ext_v5))
+  if (!ARM_FEATURE_ZERO (selected_object_arch)
+      && !ARM_CPU_HAS_FEATURE (selected_object_arch, arm_ext_v5))
       want_reloc = TRUE;
 
 #ifdef OBJ_ELF
@@ -25352,71 +25376,70 @@ md_begin (void)
       if (mcpu_cpu_opt || march_cpu_opt)
 	as_bad (_("use of old and new-style options to set CPU type"));
 
-      mcpu_cpu_opt = legacy_cpu;
+      selected_arch = *legacy_cpu;
     }
-  else if (!mcpu_cpu_opt)
+  else if (mcpu_cpu_opt)
+    {
+      selected_arch = *mcpu_cpu_opt;
+      selected_ext = *mcpu_ext_opt;
+    }
+  else if (march_cpu_opt)
     {
-      mcpu_cpu_opt = march_cpu_opt;
-      dyn_mcpu_ext_opt = dyn_march_ext_opt;
-      /* Avoid double free in arm_md_end.  */
-      dyn_march_ext_opt = NULL;
+      selected_arch = *march_cpu_opt;
+      selected_ext = *march_ext_opt;
     }
+  ARM_MERGE_FEATURE_SETS (selected_cpu, selected_arch, selected_ext);
 
   if (legacy_fpu)
     {
       if (mfpu_opt)
 	as_bad (_("use of old and new-style options to set FPU type"));
 
-      mfpu_opt = legacy_fpu;
+      selected_fpu = *legacy_fpu;
     }
-  else if (!mfpu_opt)
+  else if (mfpu_opt)
+    selected_fpu = *mfpu_opt;
+  else
     {
 #if !(defined (EABI_DEFAULT) || defined (TE_LINUX) \
 	|| defined (TE_NetBSD) || defined (TE_VXWORKS))
       /* Some environments specify a default FPU.  If they don't, infer it
 	 from the processor.  */
       if (mcpu_fpu_opt)
-	mfpu_opt = mcpu_fpu_opt;
+	selected_fpu = *mcpu_fpu_opt;
       else
-	mfpu_opt = march_fpu_opt;
+	selected_fpu = *march_fpu_opt;
 #else
-      mfpu_opt = &fpu_default;
+      selected_fpu = fpu_default;
 #endif
     }
 
-  if (!mfpu_opt)
+  if (ARM_FEATURE_ZERO (selected_fpu))
     {
-      if (mcpu_cpu_opt != NULL)
-	mfpu_opt = &fpu_default;
-      else if (mcpu_fpu_opt != NULL && ARM_CPU_HAS_FEATURE (*mcpu_fpu_opt, arm_ext_v5))
-	mfpu_opt = &fpu_arch_vfp_v2;
+      if (!no_cpu_selected ())
+	selected_fpu = fpu_default;
       else
-	mfpu_opt = &fpu_arch_fpa;
+	selected_fpu = fpu_arch_fpa;
     }
 
 #ifdef CPU_DEFAULT
-  if (!mcpu_cpu_opt)
+  if (ARM_FEATURE_ZERO (selected_arch))
     {
-      mcpu_cpu_opt = &cpu_default;
-      selected_cpu = cpu_default;
+      selected_arch = cpu_default;
+      selected_cpu = selected_arch;
     }
-  else if (dyn_mcpu_ext_opt)
-    ARM_MERGE_FEATURE_SETS (selected_cpu, *mcpu_cpu_opt, *dyn_mcpu_ext_opt);
-  else
-    selected_cpu = *mcpu_cpu_opt;
+  ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 #else
-  if (mcpu_cpu_opt && dyn_mcpu_ext_opt)
-    ARM_MERGE_FEATURE_SETS (selected_cpu, *mcpu_cpu_opt, *dyn_mcpu_ext_opt);
-  else if (mcpu_cpu_opt)
-    selected_cpu = *mcpu_cpu_opt;
+  /*  Autodection of feature mode: allow all features in cpu_variant but leave
+      selected_cpu unset.  It will be set in aeabi_set_public_attributes ()
+      after all instruction have been processed and we can decide what CPU
+      should be selected.  */
+  if (ARM_FEATURE_ZERO (selected_arch))
+    ARM_MERGE_FEATURE_SETS (cpu_variant, arm_arch_any, selected_fpu);
   else
-    mcpu_cpu_opt = &arm_arch_any;
+    ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 #endif
 
-  ARM_MERGE_FEATURE_SETS (cpu_variant, *mcpu_cpu_opt, *mfpu_opt);
-  if (dyn_mcpu_ext_opt)
-    ARM_MERGE_FEATURE_SETS (cpu_variant, cpu_variant, *dyn_mcpu_ext_opt);
-
   autoselect_thumb_from_cpu_variant ();
 
   arm_arch_used = thumb_arch_used = arm_arch_none;
@@ -26444,7 +26467,7 @@ struct arm_long_option_table
 
 static bfd_boolean
 arm_parse_extension (const char *str, const arm_feature_set *opt_set,
-		     arm_feature_set **ext_set_p)
+		     arm_feature_set *ext_set)
 {
   /* We insist on extensions being specified in alphabetical order, and with
      extensions being added before being removed.  We achieve this by having
@@ -26456,12 +26479,6 @@ arm_parse_extension (const char *str, const arm_feature_set *opt_set,
   const arm_feature_set arm_any = ARM_ANY;
   int adding_value = -1;
 
-  if (!*ext_set_p)
-    {
-      *ext_set_p = XNEW (arm_feature_set);
-      **ext_set_p = arm_arch_none;
-    }
-
   while (str != NULL && *str != 0)
     {
       const char *ext;
@@ -26539,10 +26556,9 @@ arm_parse_extension (const char *str, const arm_feature_set *opt_set,
 
 	    /* Add or remove the extension.  */
 	    if (adding_value)
-	      ARM_MERGE_FEATURE_SETS (**ext_set_p, **ext_set_p,
-				      opt->merge_value);
+	      ARM_MERGE_FEATURE_SETS (*ext_set, *ext_set, opt->merge_value);
 	    else
-	      ARM_CLEAR_FEATURE (**ext_set_p, **ext_set_p, opt->clear_value);
+	      ARM_CLEAR_FEATURE (*ext_set, *ext_set, opt->clear_value);
 
 	    /* Allowing Thumb division instructions for ARMv7 in autodetection
 	       rely on this break so that duplicate extensions (extensions
@@ -26603,9 +26619,9 @@ arm_parse_cpu (const char *str)
     if (opt->name_len == len && strncmp (opt->name, str, len) == 0)
       {
 	mcpu_cpu_opt = &opt->value;
-	if (!dyn_mcpu_ext_opt)
-	  dyn_mcpu_ext_opt = XNEW (arm_feature_set);
-	*dyn_mcpu_ext_opt = opt->ext;
+	if (mcpu_ext_opt == NULL)
+	  mcpu_ext_opt = XNEW (arm_feature_set);
+	*mcpu_ext_opt = opt->ext;
 	mcpu_fpu_opt = &opt->default_fpu;
 	if (opt->canonical_name)
 	  {
@@ -26625,7 +26641,7 @@ arm_parse_cpu (const char *str)
 	  }
 
 	if (ext != NULL)
-	  return arm_parse_extension (ext, mcpu_cpu_opt, &dyn_mcpu_ext_opt);
+	  return arm_parse_extension (ext, mcpu_cpu_opt, mcpu_ext_opt);
 
 	return TRUE;
       }
@@ -26656,11 +26672,14 @@ arm_parse_arch (const char *str)
     if (opt->name_len == len && strncmp (opt->name, str, len) == 0)
       {
 	march_cpu_opt = &opt->value;
+	if (march_ext_opt == NULL)
+	  march_ext_opt = XNEW (arm_feature_set);
+	*march_ext_opt = arm_arch_none;
 	march_fpu_opt = &opt->default_fpu;
 	strcpy (selected_cpu_name, opt->name);
 
 	if (ext != NULL)
-	  return arm_parse_extension (ext, march_cpu_opt, &dyn_march_ext_opt);
+	  return arm_parse_extension (ext, march_cpu_opt, march_ext_opt);
 
 	return TRUE;
       }
@@ -27152,26 +27171,31 @@ aeabi_set_public_attributes (void)
 	ARM_MERGE_FEATURE_SETS (flags, flags, arm_ext_v4t);
 
       /* Code run during relaxation relies on selected_cpu being set.  */
+      ARM_CLEAR_FEATURE (flags_arch, flags, fpu_any);
+      flags_ext = arm_arch_none;
+      ARM_CLEAR_FEATURE (selected_arch, flags_arch, flags_ext);
+      selected_ext = flags_ext;
       selected_cpu = flags;
     }
   /* Otherwise, choose the architecture based on the capabilities of the
      requested cpu.  */
   else
-    flags = selected_cpu;
-  ARM_MERGE_FEATURE_SETS (flags, flags, *mfpu_opt);
+    {
+      ARM_MERGE_FEATURE_SETS (flags_arch, selected_arch, selected_ext);
+      ARM_CLEAR_FEATURE (flags_arch, flags_arch, fpu_any);
+      flags_ext = selected_ext;
+      flags = selected_cpu;
+    }
+  ARM_MERGE_FEATURE_SETS (flags, flags, selected_fpu);
 
   /* Allow the user to override the reported architecture.  */
-  if (object_arch)
+  if (!ARM_FEATURE_ZERO (selected_object_arch))
     {
-      ARM_CLEAR_FEATURE (flags_arch, *object_arch, fpu_any);
+      ARM_CLEAR_FEATURE (flags_arch, selected_object_arch, fpu_any);
       flags_ext = arm_arch_none;
     }
   else
-    {
-      ARM_CLEAR_FEATURE (flags_arch, flags, fpu_any);
-      flags_ext = dyn_mcpu_ext_opt ? *dyn_mcpu_ext_opt : arm_arch_none;
-      skip_exact_match = ARM_FEATURE_EQUAL (selected_cpu, arm_arch_any);
-    }
+    skip_exact_match = ARM_FEATURE_EQUAL (selected_cpu, arm_arch_any);
 
   /* When this function is run again after relaxation has happened there is no
      way to determine whether an architecture or CPU was specified by the user:
@@ -27212,7 +27236,7 @@ aeabi_set_public_attributes (void)
     aeabi_set_attribute_int (Tag_CPU_arch_profile, profile);
 
   /* Tag_DSP_extension.  */
-  if (dyn_mcpu_ext_opt && ARM_CPU_HAS_FEATURE (*dyn_mcpu_ext_opt, arm_ext_dsp))
+  if (ARM_CPU_HAS_FEATURE (selected_ext, arm_ext_dsp))
     aeabi_set_attribute_int (Tag_DSP_extension, 1);
 
   ARM_CLEAR_FEATURE (flags_arch, flags, fpu_any);
@@ -27335,10 +27359,10 @@ void
 arm_md_post_relax (void)
 {
   aeabi_set_public_attributes ();
-  XDELETE (dyn_mcpu_ext_opt);
-  dyn_mcpu_ext_opt = NULL;
-  XDELETE (dyn_march_ext_opt);
-  dyn_march_ext_opt = NULL;
+  XDELETE (mcpu_ext_opt);
+  mcpu_ext_opt = NULL;
+  XDELETE (march_ext_opt);
+  march_ext_opt = NULL;
 }
 
 /* Add the default contents for the .ARM.attributes section.  */
@@ -27372,11 +27396,9 @@ s_arm_cpu (int ignored ATTRIBUTE_UNUSED)
   for (opt = arm_cpus + 1; opt->name != NULL; opt++)
     if (streq (opt->name, name))
       {
-	mcpu_cpu_opt = &opt->value;
-	if (!dyn_mcpu_ext_opt)
-	  dyn_mcpu_ext_opt = XNEW (arm_feature_set);
-	*dyn_mcpu_ext_opt = opt->ext;
-	ARM_MERGE_FEATURE_SETS (selected_cpu, *mcpu_cpu_opt, *dyn_mcpu_ext_opt);
+	selected_arch = opt->value;
+	selected_ext = opt->ext;
+	ARM_MERGE_FEATURE_SETS (selected_cpu, selected_arch, selected_ext);
 	if (opt->canonical_name)
 	  strcpy (selected_cpu_name, opt->canonical_name);
 	else
@@ -27387,9 +27409,8 @@ s_arm_cpu (int ignored ATTRIBUTE_UNUSED)
 
 	    selected_cpu_name[i] = 0;
 	  }
-	ARM_MERGE_FEATURE_SETS (cpu_variant, *mcpu_cpu_opt, *mfpu_opt);
-	if (dyn_mcpu_ext_opt)
-	  ARM_MERGE_FEATURE_SETS (cpu_variant, cpu_variant, *dyn_mcpu_ext_opt);
+	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
+
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	return;
@@ -27418,12 +27439,11 @@ s_arm_arch (int ignored ATTRIBUTE_UNUSED)
   for (opt = arm_archs + 1; opt->name != NULL; opt++)
     if (streq (opt->name, name))
       {
-	mcpu_cpu_opt = &opt->value;
-	XDELETE (dyn_mcpu_ext_opt);
-	dyn_mcpu_ext_opt = NULL;
-	selected_cpu = *mcpu_cpu_opt;
+	selected_arch = opt->value;
+	selected_ext = arm_arch_none;
+	selected_cpu = selected_arch;
 	strcpy (selected_cpu_name, opt->name);
-	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, *mfpu_opt);
+	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	return;
@@ -27453,7 +27473,7 @@ s_arm_object_arch (int ignored ATTRIBUTE_UNUSED)
   for (opt = arm_archs + 1; opt->name != NULL; opt++)
     if (streq (opt->name, name))
       {
-	object_arch = &opt->value;
+	selected_object_arch = opt->value;
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	return;
@@ -27470,7 +27490,6 @@ static void
 s_arm_arch_extension (int ignored ATTRIBUTE_UNUSED)
 {
   const struct arm_option_extension_value_table *opt;
-  const arm_feature_set arm_any = ARM_ANY;
   char saved_char;
   char *name;
   int adding_value = 1;
@@ -27496,9 +27515,9 @@ s_arm_arch_extension (int ignored ATTRIBUTE_UNUSED)
 	for (i = 0; i < nb_allowed_archs; i++)
 	  {
 	    /* Empty entry.  */
-	    if (ARM_FEATURE_EQUAL (opt->allowed_archs[i], arm_any))
+	    if (ARM_CPU_IS_ANY (opt->allowed_archs[i]))
 	      continue;
-	    if (ARM_FSET_CPU_SUBSET (opt->allowed_archs[i], *mcpu_cpu_opt))
+	    if (ARM_FSET_CPU_SUBSET (opt->allowed_archs[i], selected_arch))
 	      break;
 	  }
 
@@ -27509,20 +27528,14 @@ s_arm_arch_extension (int ignored ATTRIBUTE_UNUSED)
 	    break;
 	  }
 
-	if (!dyn_mcpu_ext_opt)
-	  {
-	    dyn_mcpu_ext_opt = XNEW (arm_feature_set);
-	    *dyn_mcpu_ext_opt = arm_arch_none;
-	  }
 	if (adding_value)
-	  ARM_MERGE_FEATURE_SETS (*dyn_mcpu_ext_opt, *dyn_mcpu_ext_opt,
+	  ARM_MERGE_FEATURE_SETS (selected_ext, selected_ext,
 				  opt->merge_value);
 	else
-	  ARM_CLEAR_FEATURE (*dyn_mcpu_ext_opt, *dyn_mcpu_ext_opt,
-			     opt->clear_value);
+	  ARM_CLEAR_FEATURE (selected_ext, selected_ext, opt->clear_value);
 
-	ARM_MERGE_FEATURE_SETS (selected_cpu, *mcpu_cpu_opt, *dyn_mcpu_ext_opt);
-	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, *mfpu_opt);
+	ARM_MERGE_FEATURE_SETS (selected_cpu, selected_arch, selected_ext);
+	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	/* Allowing Thumb division instructions for ARMv7 in autodetection rely
@@ -27557,10 +27570,13 @@ s_arm_fpu (int ignored ATTRIBUTE_UNUSED)
   for (opt = arm_fpus; opt->name != NULL; opt++)
     if (streq (opt->name, name))
       {
-	mfpu_opt = &opt->value;
-	ARM_MERGE_FEATURE_SETS (cpu_variant, *mcpu_cpu_opt, *mfpu_opt);
-	if (dyn_mcpu_ext_opt)
-	  ARM_MERGE_FEATURE_SETS (cpu_variant, cpu_variant, *dyn_mcpu_ext_opt);
+	selected_fpu = opt->value;
+#ifndef CPU_DEFAULT
+	if (no_cpu_selected ())
+	  ARM_MERGE_FEATURE_SETS (cpu_variant, arm_arch_any, selected_fpu);
+	else
+#endif
+	  ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	return;
Alan Modra March 1, 2018, 11:26 p.m. | #3
On Thu, Mar 01, 2018 at 04:27:44PM +0000, Thomas Preudhomme wrote:
> Hi Nick,

> 

> Thank you for the approval and the quick review. I've noticed one more issue

> in mark_feature_used which was referring to selected architecture but

> testing cpu_variant (which only represents what is allowed). I've considered

> this to be an obvious fix so have committed the patch with that comment fix.


I'm guessing the following is due to this patch.  ;-)

arm-nto  +FAIL: thumb2-cond (assembling)
arm-nto  +FAIL: multiple input files
arm-nto  +FAIL: skip rvct symbol
arm-nto  +FAIL: nm (assembling)
arm-nto  +FAIL: nm --size-sort (assembling)
arm-nto  +ERROR: objdump can not recognize bintest.o
arm-nto  +ERROR: objdump can not recognize bintest.o
arm-nto  +FAIL: copy with setting section flags 2
arm-nto  +FAIL: copy with setting section flags 3
arm-nto  +FAIL: strip --strip-unneeded on common symbol
arm-nto  +FAIL: --localize-hidden test 2
arm-nto  +FAIL: objdump (assembling)
arm-nto  +FAIL: size (assembling)
arm-nto  +FAIL: pcrel values in assignment
arm-nto  +FAIL: simplifiable double subtraction
arm-nto  +FAIL: simplifiable double subtraction (-a)
arm-nto  +FAIL: simple FP constants
arm-nto  +FAIL: difference of two undefined symbols
arm-nto  +FAIL: .equiv for symbol already set to another one
arm-nto  +FAIL: .equiv for symbol already set to an expression
arm-nto  +FAIL: .equ for symbol already set
arm-nto  +FAIL: .equ for symbol already set through .eqv
arm-nto  +FAIL: .eqv support
arm-nto  +FAIL: .eqv for symbol already set
arm-nto  +FAIL: == assignment support
arm-nto  +FAIL: == assignment for symbol already set
arm-nto  +FAIL: forward references
arm-nto  +FAIL: forward expression
arm-nto  +FAIL: .equ redefinitions
arm-nto  +FAIL: .equ redefinitions (2)
arm-nto  +FAIL: .equ redefinitions (3)
arm-nto  +FAIL: .set for symbol already used as label
arm-nto  +FAIL: .set for symbol already defined through .comm
arm-nto  +FAIL: comment.s: comments in listings
arm-nto  +FAIL: general info section in listings
arm-nto  +FAIL: difference between forward references
arm-nto  +FAIL: struct
arm-nto  +FAIL: align
arm-nto  +FAIL: align2
arm-nto  +FAIL: alternate macro syntax
arm-nto  +FAIL: conditional listings
arm-nto  +FAIL: incbin
arm-nto  +FAIL: assignment tests
arm-nto  +FAIL: .sleb128 tests
arm-nto  +FAIL: .sleb128 tests (2)
arm-nto  +FAIL: .sleb128 tests (3)
arm-nto  +FAIL: .sleb128 tests (4)
arm-nto  +FAIL: .sleb128 tests (5)
arm-nto  +FAIL: .sleb128 tests (7)
arm-nto  +FAIL: .sleb128 tests (8)
arm-nto  +FAIL: undefined symbols in sleb128 directive
arm-nto  +FAIL: relax .uleb128
arm-nto  +FAIL: .quad tests
arm-nto  +FAIL: octa bignum
arm-nto  +FAIL: weakref tests, relocations
arm-nto  +FAIL: weakref tests, global syms
arm-nto  +FAIL: weakref tests, local syms
arm-nto  +FAIL: weakref tests, strong undefined syms
arm-nto  +FAIL: weakref tests, weak undefined syms
arm-nto  +FAIL: e: would close weakref loop: e => a => b => c => d => e
arm-nto  +FAIL: a: would close weakref loop: a => b => c => d => e => a
arm-nto  +FAIL: is already defined
arm-nto  +FAIL: .strings tests
arm-nto  +FAIL: quoted symbol names
arm-nto  +FAIL: all pr20312
arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 3)
arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 4)
arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 5)
arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 6)
arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 7)
arm-nto  +FAIL: gas/all/err-1.s (test for excess errors)
arm-nto  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)
arm-nto  +FAIL: gas/all/err-fakelabel.s (test for excess errors)
arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)
arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)
arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)
arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)
arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)
arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)
arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)
arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)
arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)
arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)
arm-nto  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)
arm-nto  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)
arm-nto  +FAIL: gas/all/err-sizeof.s (test for excess errors)
arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)
arm-nto  +FAIL: gas/all/warn-1.s  (test for errors, line 4)
arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)
arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)
arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)
arm-nto  +FAIL: gas/all/warn-1.s (test for excess errors)
arm-nto  +FAIL: .org test 1
arm-nto  +FAIL: .org test 2
arm-nto  +FAIL: .org test 3
arm-nto  +FAIL: .org test 4
arm-nto  +FAIL: .org test 5
arm-nto  +FAIL: .org test 6
arm-nto  +FAIL: fill test with forward labels
arm-nto  +FAIL: Two register form of data processing instruction with register shifted register operand
arm-nto  +FAIL: ADDS relocations against local symbols for armv7-m
arm-nto  +FAIL: ADDS relocations against local symbols for armv6s-m
arm-nto  +FAIL: Invalid Immediate field for flag-setting add,sub
arm-nto  +FAIL: Invalid use of ADR and ADRL
arm-nto  +FAIL: ADR
arm-nto  +FAIL: ADRL
arm-nto  +FAIL: 64 Bytes alignment test
arm-nto  +FAIL: ARMv6-M
arm-nto  +FAIL: ARM Integer division instructions
arm-nto  +FAIL: Test automatic IT generation in Thumb-1 architectures.
arm-nto  +FAIL: ARM IT instruction
arm-nto  +FAIL: ARM mode Thumb errors
arm-nto  +FAIL: Valid v7-A+IDIV
arm-nto  +FAIL: Valid v7e-m+fpv5-d16
arm-nto  +FAIL: gas/arm/armv7e-m+fpv5-sp-d16
arm-nto  +FAIL: Valid v8-a+cryptov1
arm-nto  +FAIL: Valid v8-a+pan
arm-nto  +FAIL: gas/arm/armv8a-automatic-hlt
arm-nto  +FAIL: gas/arm/armv8a-automatic-lda
arm-nto  +FAIL: gas/arm/attr-syntax
arm-nto  +FAIL: gas/arm/automatic-bw
arm-nto  +FAIL: gas/arm/automatic-cbz
arm-nto  +FAIL: gas/arm/automatic-clrex
arm-nto  +FAIL: gas/arm/automatic-lda
arm-nto  +FAIL: gas/arm/automatic-ldaex
arm-nto  +FAIL: gas/arm/automatic-ldaexb
arm-nto  +FAIL: gas/arm/automatic-ldrex
arm-nto  +FAIL: gas/arm/automatic-ldrexd
arm-nto  +FAIL: gas/arm/automatic-movw
arm-nto  +FAIL: gas/arm/automatic-sdiv
arm-nto  +FAIL: gas/arm/automatic-strexb
arm-nto  +FAIL: Backslash-at for ARM
arm-nto  +FAIL: Bad barrier options (Thumb)
arm-nto  +FAIL: Bad barrier options (ARM)
arm-nto  +FAIL: bignums
arm-nto  +FAIL: BLX encoding
arm-nto  +FAIL: CSDB
arm-nto  +FAIL: Deprecated swp{b} instructions
arm-nto  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM
arm-nto  +FAIL: Data disassembler test (no symbols)
arm-nto  +FAIL: Data disassembler test (function symbol)
arm-nto  +FAIL: Data disassembler test (with mapping symbol)
arm-nto  +FAIL: gas/arm/eabi_attr_1
arm-nto  +FAIL: El Segundo instructions
arm-nto  +FAIL: Group relocation tests, encoding failures (alu)
arm-nto  +FAIL: Group relocation tests, parsing failures (alu)
arm-nto  +FAIL: Group relocation tests (alu)
arm-nto  +FAIL: Group relocation tests, encoding failures (ldc)
arm-nto  +FAIL: Group relocation tests, parsing failures (ldc)
arm-nto  +FAIL: Group relocation tests (ldc)
arm-nto  +FAIL: Group relocation tests, encoding failures (ldr)
arm-nto  +FAIL: Group relocation tests, parsing failures (ldr)
arm-nto  +FAIL: Group relocation tests (ldr)
arm-nto  +FAIL: Group relocation tests, encoding failures (ldrs)
arm-nto  +FAIL: Group relocation tests, parsing failures (ldrs)
arm-nto  +FAIL: Group relocation tests (ldrs)
arm-nto  +FAIL: immediate expressions
arm-nto  +FAIL: modified immediate constants
arm-nto  +FAIL: invalid instruction recovery test - ARM version
arm-nto  +FAIL: invalid instruction recovery test - Thumb version
arm-nto  +FAIL: .inst pseudo-opcode validations test
arm-nto  +FAIL: .inst pseudo-opcode with automatic IT blocks test
arm-nto  +FAIL: .inst pseudo-opcode test 1 - big endian version
arm-nto  +FAIL: .inst pseudo-opcode test 1
arm-nto  +FAIL: Erratum 752419: Warn Loads with writebacks to SP
arm-nto  +FAIL: Unpredictable operations - ldr - arm
arm-nto  +FAIL: PC-relative LDR from global
arm-nto  +FAIL: Unpredictable operations - ldr - thumb
arm-nto  +FAIL: ldr - thumb
arm-nto  +FAIL: ldr - arm
arm-nto  +FAIL: Unpredictable LDRD and STRD instructions. - ARM
arm-nto  +FAIL: Accept lds<cc>sb mnemonics
arm-nto  +FAIL: Accept lds<cc>sh mnemonics
arm-nto  +FAIL: ARM load/store with 0 offset
arm-nto  +FAIL: ARM load/store with pc base register
arm-nto  +FAIL: Relocations against local function symbols
arm-nto  +FAIL: ARM local label relocs to section symbol relocs (ELF)
arm-nto  +FAIL: gas/arm/macro-pld
arm-nto  +FAIL: gas/arm/macro-vld1
arm-nto  +FAIL: Macro scrubbing
arm-nto  +FAIL: ARM Mapping Symbols
arm-nto  +FAIL: ARM Mapping Symbols Test 2
arm-nto  +FAIL: ARM Mapping Symbols Test 3
arm-nto  +FAIL: ARM Mapping Symbols Test 4
arm-nto  +FAIL: ARM Mapping Symbols for .short (ELF version)
arm-nto  +FAIL: MOVS relocations against local symbols for armv7-m
arm-nto  +FAIL: MOVS relocations against local symbols for armv6s-m
arm-nto  +FAIL: MOVW/MOVT relocations against local symbols
arm-nto  +FAIL: MRS/MSR test, architecture v6, ARM mode
arm-nto  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode
arm-nto  +FAIL: MRS/MSR test, architecture v7-A, ARM mode
arm-nto  +FAIL: MRS/MSR test, architecture v6t2, Thumb mode
arm-nto  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode
arm-nto  +FAIL: MRS/MSR test, architecture v7-M, Thumb mode
arm-nto  +FAIL: MRS/MSR test, architecture v7e-M, Thumb mode
arm-nto  +FAIL: Overlapping multiplication operands for ARMv6
arm-nto  +FAIL: Overlapping multiplication operands without architecture specification
arm-nto  +FAIL: Disallow ARM instructions on V7M
arm-nto  +FAIL: ARM Mapping Symbols Ignored
arm-nto  +FAIL: NOP<c> instructions
arm-nto  +FAIL: MINUS ZERO OFFSET
arm-nto  +FAIL: OFFSET_IMM regression
arm-nto  +FAIL: PIC
arm-nto  +FAIL: 26-bit teq/cmn/tst/cmp instructions
arm-nto  +FAIL: Thumb branch to PLT
arm-nto  +FAIL: PR18256 - Bad code triggers internal error
arm-nto  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction
arm-nto  +FAIL: ADR(L) for Thumb functions
arm-nto  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction
arm-nto  +FAIL: PR9722: Generation of Thumb NOP instruction
arm-nto  +FAIL: PUSH and POP
arm-nto  +FAIL: Invalid use of r15 errors
arm-nto  +FAIL: Case Sensitive Register Aliases
arm-nto  +FAIL: Branch relaxation with alignment.
arm-nto  +FAIL: Invalid relocations
arm-nto  +FAIL: pc used in instructions with register-shifted register
arm-nto  +FAIL: PR 12854: Extraneous shifts
arm-nto  +FAIL: SP and PC registers special uses test.
arm-nto  +FAIL: Invalid SP and PC operands test - ARM
arm-nto  +FAIL: SRS instruction in ARM mode
arm-nto  +FAIL: SRS instruction in Thumb-2 mode
arm-nto  +FAIL: STM and LDM
arm-nto  +FAIL: STREXH/STREXB. - Thumb
arm-nto  +FAIL: SWI/SVC instructions
arm-nto  +FAIL: Thumb-2 branch to constant address
arm-nto  +FAIL: TARGET reloc
arm-nto  +FAIL: ARM Thumb-compat pseudos
arm-nto  +FAIL: Thumb ARM-compat pseudos
arm-nto  +FAIL: Out of range Thumb branches (PR 12848)
arm-nto  +FAIL: Thumb NOP
arm-nto  +FAIL: Wide instruction rejected in non-Thumb2 cores.
arm-nto  +FAIL: Wide instruction acceptance in Thumb-2 cores
arm-nto  +FAIL: Thumb-1 unified
arm-nto  +FAIL: gas/arm/thumb2_bcond
arm-nto  +FAIL: Invalid IT instructions
arm-nto  +FAIL: Invalid IT instructions
arm-nto  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2
arm-nto  +FAIL: gas/arm/thumbver
arm-nto  +FAIL: TLS
arm-nto  +FAIL: Invalid UDF operands
arm-nto  +FAIL: Undefined local label error
arm-nto  +FAIL: Upredictable Instructions
arm-nto  +FAIL: Unwind table generation
arm-nto  +FAIL: gas/arm/v4bx
arm-nto  +FAIL: VCMP immediate without prefix
arm-nto  +FAIL: Thumb branch to weak
arm-nto  +FAIL: adr of weak
arm-nto  +FAIL: macro test 1
arm-nto  +FAIL: macro test 2
arm-nto  +FAIL: macro test 3
arm-nto  +FAIL: macro irp
arm-nto  +FAIL: macro rept
arm-nto  +FAIL: nested irp/irpc/rept
arm-nto  +FAIL: macro vararg
arm-nto  +FAIL: macro infinite recursion
arm-nto  +FAIL: logical and in macro definition
arm-nto  +FAIL: semi
arm-nto  +FAIL: strings
arm-nto  +FAIL: APP with macro without NO_APP
arm-nto  +FAIL: APP with macro then NO_APP
arm-nto  +FAIL: APP with macro then NO_APP then more code
arm-nto  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file
arm-nto  +FAIL: macros badarg
arm-nto  +FAIL: macros dot
arm-nto  +FAIL: macros end
arm-nto  +FAIL: macros purge
arm-nto  +FAIL: macros redef
arm-nto  +FAIL: .exitm outside of a macro
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed
arm-nto  +FAIL: --gc-sections -r without -e
arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed
arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed
arm-nto  +FAIL: ld-scripts/data
arm-nto  +FAIL: ld-scripts/fill
arm-nto  +FAIL: ld-scripts/fill16
arm-nto  +FAIL: ld-scripts/default-script1
arm-nto  +FAIL: ld-scripts/default-script2
arm-nto  +FAIL: ld-scripts/default-script3
arm-nto  +FAIL: ld-scripts/default-script4
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed
arm-nto  +FAIL: ld-scripts/empty-address-1
arm-nto  +FAIL: ld-scripts/empty-address-2a
arm-nto  +FAIL: ld-scripts/empty-address-2b
arm-nto  +FAIL: ld-scripts/empty-address-3a
arm-nto  +FAIL: ld-scripts/empty-address-3b
arm-nto  +FAIL: ld-scripts/empty-address-3c
arm-nto  +FAIL: ld-scripts/expr1
arm-nto  +FAIL: ld-scripts/expr2
arm-nto  +FAIL: ld-scripts/sane1
arm-nto  +FAIL: ld-scripts/assign-loc
arm-nto  +FAIL: ld-scripts/pr14962
arm-nto  +FAIL: ld-scripts/pr14962-2
arm-nto  +FAIL: ld-scripts/pr22267
arm-nto  +FAIL: ld-scripts/pr18963
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed
arm-nto  +FAIL: include-1
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed
arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed
arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed
arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed
arm-nto  +FAIL: ld-scripts/provide-1
arm-nto  +FAIL: ld-scripts/provide-2
arm-nto  +FAIL: ld-scripts/provide-4
arm-nto  +FAIL: ld-scripts/provide-5
arm-nto  +FAIL: ld-scripts/provide-6
arm-nto  +FAIL: ld-scripts/provide-7
arm-nto  +FAIL: ld-scripts/provide-8
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed
arm-nto  +FAIL: ld-scripts/section-match-1
arm-nto  +FAIL: ld-scripts/size-1
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed
arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed
arm-nto  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework
arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed
arm-nto  +FAIL: --entry foo archive
arm-nto  +FAIL: --entry foo -u foo archive
arm-nto  +FAIL: --entry foo
arm-nto  +FAIL: --entry foo -u foo
arm-nto  +FAIL: --entry 0x0
arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed
arm-nto  +FAIL: Check require-defined with an undefined symbol
arm-nto  +FAIL: Check require-defined can require a symbol from an object
arm-nto  +FAIL: Check require-defined does no error on a defined symbol
arm-nto  +FAIL: Check require-defined can require a symbol from an archive
arm-nto  +FAIL: Check require-defined can require two symbols
arm-pe  +FAIL: thumb2-cond (assembling)
arm-pe  +FAIL: multiple input files
arm-pe  +FAIL: skip rvct symbol
arm-pe  +FAIL: dlltool (version.dll)
arm-pe  +FAIL: dlltool -p (execution)
arm-pe  +FAIL: nm (assembling)
arm-pe  +FAIL: nm --size-sort (assembling)
arm-pe  +ERROR: objdump can not recognize bintest.o
arm-pe  +ERROR: objdump can not recognize bintest.o
arm-pe  +FAIL: copy with setting section flags 2
arm-pe  +FAIL: strip --strip-unneeded on common symbol
arm-pe  +FAIL: --localize-hidden test 2
arm-pe  +FAIL: objdump (assembling)
arm-pe  +FAIL: size (assembling)
arm-pe  +FAIL: pcrel values in assignment
arm-pe  +FAIL: simplifiable double subtraction
arm-pe  +FAIL: simplifiable double subtraction (-a)
arm-pe  +FAIL: simple FP constants
arm-pe  +FAIL: difference of two undefined symbols
arm-pe  +FAIL: .equiv for symbol already set to another one
arm-pe  +FAIL: .equiv for symbol already set to an expression
arm-pe  +FAIL: .equ for symbol already set
arm-pe  +FAIL: .equ for symbol already set through .eqv
arm-pe  +FAIL: .eqv support
arm-pe  +FAIL: .eqv for symbol already set
arm-pe  +FAIL: == assignment support
arm-pe  +FAIL: == assignment for symbol already set
arm-pe  +FAIL: forward references
arm-pe  +FAIL: forward expression
arm-pe  +FAIL: .equ redefinitions
arm-pe  +FAIL: .equ redefinitions (3)
arm-pe  +FAIL: .set for symbol already used as label
arm-pe  +FAIL: .set for symbol already defined through .comm
arm-pe  +FAIL: comment.s: comments in listings
arm-pe  +FAIL: general info section in listings
arm-pe  +FAIL: difference between forward references
arm-pe  +FAIL: struct
arm-pe  +FAIL: align
arm-pe  +FAIL: align2
arm-pe  +FAIL: alternate macro syntax
arm-pe  +FAIL: conditional listings
arm-pe  +FAIL: incbin
arm-pe  +FAIL: assignment tests
arm-pe  +FAIL: .sleb128 tests
arm-pe  +FAIL: .sleb128 tests (2)
arm-pe  +FAIL: .sleb128 tests (3)
arm-pe  +FAIL: .sleb128 tests (4)
arm-pe  +FAIL: .sleb128 tests (5)
arm-pe  +FAIL: .sleb128 tests (7)
arm-pe  +FAIL: .sleb128 tests (8)
arm-pe  +FAIL: undefined symbols in sleb128 directive
arm-pe  +FAIL: relax .uleb128
arm-pe  +FAIL: .quad tests
arm-pe  +FAIL: octa bignum
arm-pe  +FAIL: weakref tests, relocations
arm-pe  +FAIL: weakref tests, global syms
arm-pe  +FAIL: weakref tests, local syms
arm-pe  +FAIL: weakref tests, strong undefined syms
arm-pe  +FAIL: weakref tests, weak undefined syms
arm-pe  +FAIL: e: would close weakref loop: e => a => b => c => d => e
arm-pe  +FAIL: a: would close weakref loop: a => b => c => d => e => a
arm-pe  +FAIL: is already defined
arm-pe  +FAIL: .strings tests
arm-pe  +FAIL: quoted symbol names
arm-pe  +FAIL: all pr20312
arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 3)
arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 4)
arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 5)
arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 6)
arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 7)
arm-pe  +FAIL: gas/all/err-1.s (test for excess errors)
arm-pe  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)
arm-pe  +FAIL: gas/all/err-fakelabel.s (test for excess errors)
arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)
arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)
arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)
arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)
arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)
arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)
arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)
arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)
arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)
arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)
arm-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)
arm-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)
arm-pe  +FAIL: gas/all/err-sizeof.s (test for excess errors)
arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)
arm-pe  +FAIL: gas/all/warn-1.s  (test for errors, line 4)
arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)
arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)
arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)
arm-pe  +FAIL: gas/all/warn-1.s (test for excess errors)
arm-pe  +FAIL: .org test 1
arm-pe  +FAIL: .org test 2
arm-pe  +FAIL: .org test 3
arm-pe  +FAIL: .org test 4
arm-pe  +FAIL: .org test 5
arm-pe  +FAIL: .org test 6
arm-pe  +FAIL: fill test with forward labels
arm-pe  +FAIL: Two register form of data processing instruction with register shifted register operand
arm-pe  +FAIL: Invalid use of ADR and ADRL
arm-pe  +FAIL: ADR
arm-pe  +FAIL: ADRL
arm-pe  +FAIL: ARMv6-M
arm-pe  +FAIL: ARM Integer division instructions
arm-pe  +FAIL: Test automatic IT generation in Thumb-1 architectures.
arm-pe  +FAIL: ARM mode Thumb errors
arm-pe  +FAIL: Valid v7-A+IDIV
arm-pe  +FAIL: Valid v8-a+pan
arm-pe  +FAIL: Backslash-at for ARM
arm-pe  +FAIL: Deprecated swp{b} instructions
arm-pe  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM
arm-pe  +FAIL: El Segundo instructions
arm-pe  +FAIL: immediate expressions
arm-pe  +FAIL: modified immediate constants
arm-pe  +FAIL: Erratum 752419: Warn Loads with writebacks to SP
arm-pe  +FAIL: Unpredictable operations - ldr - arm
arm-pe  +FAIL: PC-relative LDR from global
arm-pe  +FAIL: Unpredictable operations - ldr - thumb
arm-pe  +FAIL: ldr - thumb
arm-pe  +FAIL: ldr - arm
arm-pe  +FAIL: Unpredictable LDRD and STRD instructions. - ARM
arm-pe  +FAIL: Accept lds<cc>sb mnemonics
arm-pe  +FAIL: Accept lds<cc>sh mnemonics
arm-pe  +FAIL: ARM load/store with pc base register
arm-pe  +FAIL: arm little-endian fpconst
arm-pe  +FAIL: ARM local label relocs to section symbol relocs (COFF)
arm-pe  +FAIL: gas/arm/macro-pld
arm-pe  +FAIL: gas/arm/macro-vld1
arm-pe  +FAIL: Macro scrubbing
arm-pe  +FAIL: MRS/MSR test, architecture v6, ARM mode
arm-pe  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode
arm-pe  +FAIL: MRS/MSR test, architecture v7-A, ARM mode
arm-pe  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode
arm-pe  +FAIL: Overlapping multiplication operands for ARMv6
arm-pe  +FAIL: Overlapping multiplication operands without architecture specification
arm-pe  +FAIL: Disallow ARM instructions on V7M
arm-pe  +FAIL: MINUS ZERO OFFSET
arm-pe  +FAIL: OFFSET_IMM regression
arm-pe  +FAIL: PR18256 - Bad code triggers internal error
arm-pe  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction
arm-pe  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction
arm-pe  +FAIL: PUSH and POP
arm-pe  +FAIL: Invalid use of r15 errors
arm-pe  +FAIL: Case Sensitive Register Aliases
arm-pe  +FAIL: Branch relaxation with alignment.
arm-pe  +FAIL: Invalid relocations
arm-pe  +FAIL: pc used in instructions with register-shifted register
arm-pe  +FAIL: PR 12854: Extraneous shifts
arm-pe  +FAIL: SP and PC registers special uses test.
arm-pe  +FAIL: Invalid SP and PC operands test - ARM
arm-pe  +FAIL: SRS instruction in ARM mode
arm-pe  +FAIL: SRS instruction in Thumb-2 mode
arm-pe  +FAIL: STM and LDM
arm-pe  +FAIL: SWI/SVC instructions
arm-pe  +FAIL: ARM Thumb-compat pseudos
arm-pe  +FAIL: Thumb ARM-compat pseudos
arm-pe  +FAIL: Thumb NOP
arm-pe  +FAIL: Thumb-1 unified
arm-pe  +FAIL: gas/arm/thumb2_bcond
arm-pe  +FAIL: Invalid IT instructions
arm-pe  +FAIL: Invalid IT instructions
arm-pe  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2
arm-pe  +FAIL: Invalid UDF operands
arm-pe  +FAIL: Undefined local label error
arm-pe  +FAIL: Upredictable Instructions
arm-pe  +FAIL: macro test 1
arm-pe  +FAIL: macro test 2
arm-pe  +FAIL: macro test 3
arm-pe  +FAIL: macro irp
arm-pe  +FAIL: macro rept
arm-pe  +FAIL: nested irp/irpc/rept
arm-pe  +FAIL: macro vararg
arm-pe  +FAIL: macro infinite recursion
arm-pe  +FAIL: logical and in macro definition
arm-pe  +FAIL: semi
arm-pe  +FAIL: strings
arm-pe  +FAIL: APP with macro without NO_APP
arm-pe  +FAIL: APP with macro then NO_APP
arm-pe  +FAIL: APP with macro then NO_APP then more code
arm-pe  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file
arm-pe  +FAIL: macros badarg
arm-pe  +FAIL: macros dot
arm-pe  +FAIL: macros end
arm-pe  +FAIL: macros purge
arm-pe  +FAIL: macros redef
arm-pe  +FAIL: .exitm outside of a macro
arm-pe  +FAIL: aligned common A
arm-pe  +FAIL: aligned common B
arm-pe  +FAIL: aligned common C
arm-pe  +FAIL: aligned common D
arm-pe  +FAIL: section alignment
arm-pe  +FAIL: section alignment
arm-pe  +FAIL: section exclude
arm-pe  +FAIL: set directive in COFF
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed
arm-pe  +FAIL: --gc-sections -r without -e
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed
arm-pe  +FAIL: PE-COFF --export-dynamic warning
arm-pe  +FAIL: PE-COFF Long section names (default)
arm-pe  +FAIL: PE-COFF Long section names (disabled)
arm-pe  +FAIL: PE-COFF Long section names (enabled)
arm-pe  +FAIL: PE-COFF Long section names in objects (default)
arm-pe  +FAIL: PE-COFF Long section names in objects (disabled)
arm-pe  +FAIL: PE-COFF Long section names in objects (enabled)
arm-pe  +FAIL: ld-pe/orphan
arm-pe  +FAIL: ld-pe/orphan_nu
arm-pe  +FAIL: ld-pe/pr19803
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/pr19803.s: assembly failed
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/non-c-lang-syms.s: assembly failed
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/alignof.s: assembly failed
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed
arm-pe  +FAIL: ld-scripts/data
arm-pe  +FAIL: ld-scripts/fill
arm-pe  +FAIL: ld-scripts/fill16
arm-pe  +FAIL: ld-scripts/default-script1
arm-pe  +FAIL: ld-scripts/default-script2
arm-pe  +FAIL: ld-scripts/default-script3
arm-pe  +FAIL: ld-scripts/default-script4
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed
arm-pe  +FAIL: ld-scripts/empty-address-1
arm-pe  +FAIL: ld-scripts/empty-address-2a
arm-pe  +FAIL: ld-scripts/empty-address-2b
arm-pe  +FAIL: ld-scripts/empty-address-3a
arm-pe  +FAIL: ld-scripts/empty-address-3b
arm-pe  +FAIL: ld-scripts/empty-address-3c
arm-pe  +FAIL: ld-scripts/expr1
arm-pe  +FAIL: ld-scripts/expr2
arm-pe  +FAIL: ld-scripts/sane1
arm-pe  +FAIL: ld-scripts/assign-loc
arm-pe  +FAIL: ld-scripts/pr14962
arm-pe  +FAIL: ld-scripts/pr14962-2
arm-pe  +FAIL: ld-scripts/pr22267
arm-pe  +FAIL: ld-scripts/pr18963
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed
arm-pe  +FAIL: include-1
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed
arm-pe  +FAIL: ld-scripts/provide-1
arm-pe  +FAIL: ld-scripts/provide-2
arm-pe  +FAIL: ld-scripts/provide-4
arm-pe  +FAIL: ld-scripts/provide-5
arm-pe  +FAIL: ld-scripts/provide-6
arm-pe  +FAIL: ld-scripts/provide-7
arm-pe  +FAIL: ld-scripts/provide-8
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed
arm-pe  +FAIL: ld-scripts/size-1
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed
arm-pe  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/weak1.s: assembly failed
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed
arm-pe  +FAIL: --entry foo archive
arm-pe  +FAIL: --entry foo -u foo archive
arm-pe  +FAIL: --entry foo
arm-pe  +FAIL: --entry foo -u foo
arm-pe  +FAIL: --entry 0x0
arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed
arm-pe  +FAIL: Check require-defined with an undefined symbol
arm-pe  +FAIL: Check require-defined can require a symbol from an object
arm-pe  +FAIL: Check require-defined does no error on a defined symbol
arm-pe  +FAIL: Check require-defined can require a symbol from an archive
arm-pe  +FAIL: Check require-defined can require two symbols
arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/weak-undef.s: assembly failed
arm-wince-pe  +FAIL: thumb2-cond (assembling)
arm-wince-pe  +FAIL: multiple input files
arm-wince-pe  +FAIL: skip rvct symbol
arm-wince-pe  +FAIL: dlltool (version.dll)
arm-wince-pe  +FAIL: dlltool -p (execution)
arm-wince-pe  +FAIL: nm (assembling)
arm-wince-pe  +FAIL: nm --size-sort (assembling)
arm-wince-pe  +ERROR: objdump can not recognize bintest.o
arm-wince-pe  +ERROR: objdump can not recognize bintest.o
arm-wince-pe  +FAIL: copy with setting section flags 2
arm-wince-pe  +FAIL: strip --strip-unneeded on common symbol
arm-wince-pe  +FAIL: --localize-hidden test 2
arm-wince-pe  +FAIL: objdump (assembling)
arm-wince-pe  +FAIL: size (assembling)
arm-wince-pe  +FAIL: pcrel values in assignment
arm-wince-pe  +FAIL: simplifiable double subtraction
arm-wince-pe  +FAIL: simplifiable double subtraction (-a)
arm-wince-pe  +FAIL: simple FP constants
arm-wince-pe  +FAIL: difference of two undefined symbols
arm-wince-pe  +FAIL: .equiv for symbol already set to another one
arm-wince-pe  +FAIL: .equiv for symbol already set to an expression
arm-wince-pe  +FAIL: .equ for symbol already set
arm-wince-pe  +FAIL: .equ for symbol already set through .eqv
arm-wince-pe  +FAIL: .eqv support
arm-wince-pe  +FAIL: .eqv for symbol already set
arm-wince-pe  +FAIL: == assignment support
arm-wince-pe  +FAIL: == assignment for symbol already set
arm-wince-pe  +FAIL: forward references
arm-wince-pe  +FAIL: forward expression
arm-wince-pe  +FAIL: .equ redefinitions
arm-wince-pe  +FAIL: .equ redefinitions (2)
arm-wince-pe  +FAIL: .equ redefinitions (3)
arm-wince-pe  +FAIL: .set for symbol already used as label
arm-wince-pe  +FAIL: .set for symbol already defined through .comm
arm-wince-pe  +FAIL: comment.s: comments in listings
arm-wince-pe  +FAIL: general info section in listings
arm-wince-pe  +FAIL: difference between forward references
arm-wince-pe  +FAIL: struct
arm-wince-pe  +FAIL: align
arm-wince-pe  +FAIL: align2
arm-wince-pe  +FAIL: alternate macro syntax
arm-wince-pe  +FAIL: conditional listings
arm-wince-pe  +FAIL: incbin
arm-wince-pe  +FAIL: assignment tests
arm-wince-pe  +FAIL: .sleb128 tests
arm-wince-pe  +FAIL: .sleb128 tests (2)
arm-wince-pe  +FAIL: .sleb128 tests (3)
arm-wince-pe  +FAIL: .sleb128 tests (4)
arm-wince-pe  +FAIL: .sleb128 tests (5)
arm-wince-pe  +FAIL: .sleb128 tests (7)
arm-wince-pe  +FAIL: .sleb128 tests (8)
arm-wince-pe  +FAIL: undefined symbols in sleb128 directive
arm-wince-pe  +FAIL: relax .uleb128
arm-wince-pe  +FAIL: .quad tests
arm-wince-pe  +FAIL: octa bignum
arm-wince-pe  +FAIL: weakref tests, relocations
arm-wince-pe  +FAIL: weakref tests, global syms
arm-wince-pe  +FAIL: weakref tests, local syms
arm-wince-pe  +FAIL: weakref tests, strong undefined syms
arm-wince-pe  +FAIL: weakref tests, weak undefined syms
arm-wince-pe  +FAIL: e: would close weakref loop: e => a => b => c => d => e
arm-wince-pe  +FAIL: a: would close weakref loop: a => b => c => d => e => a
arm-wince-pe  +FAIL: is already defined
arm-wince-pe  +FAIL: .strings tests
arm-wince-pe  +FAIL: quoted symbol names
arm-wince-pe  +FAIL: all pr20312
arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 3)
arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 4)
arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 5)
arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 6)
arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 7)
arm-wince-pe  +FAIL: gas/all/err-1.s (test for excess errors)
arm-wince-pe  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)
arm-wince-pe  +FAIL: gas/all/err-fakelabel.s (test for excess errors)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)
arm-wince-pe  +FAIL: gas/all/err-sizeof.s (test for excess errors)
arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)
arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for errors, line 4)
arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)
arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)
arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)
arm-wince-pe  +FAIL: gas/all/warn-1.s (test for excess errors)
arm-wince-pe  +FAIL: .org test 1
arm-wince-pe  +FAIL: .org test 2
arm-wince-pe  +FAIL: .org test 3
arm-wince-pe  +FAIL: .org test 4
arm-wince-pe  +FAIL: .org test 5
arm-wince-pe  +FAIL: .org test 6
arm-wince-pe  +FAIL: fill test with forward labels
arm-wince-pe  +FAIL: Two register form of data processing instruction with register shifted register operand
arm-wince-pe  +FAIL: Invalid use of ADR and ADRL
arm-wince-pe  +FAIL: ADR
arm-wince-pe  +FAIL: ADRL
arm-wince-pe  +FAIL: ARMv6-M
arm-wince-pe  +FAIL: ARM Integer division instructions
arm-wince-pe  +FAIL: Test automatic IT generation in Thumb-1 architectures.
arm-wince-pe  +FAIL: ARM mode Thumb errors
arm-wince-pe  +FAIL: Valid v7-A+IDIV
arm-wince-pe  +FAIL: Valid v8-a+pan
arm-wince-pe  +FAIL: Backslash-at for ARM
arm-wince-pe  +FAIL: Deprecated swp{b} instructions
arm-wince-pe  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM
arm-wince-pe  +FAIL: El Segundo instructions
arm-wince-pe  +FAIL: immediate expressions
arm-wince-pe  +FAIL: modified immediate constants
arm-wince-pe  +FAIL: Erratum 752419: Warn Loads with writebacks to SP
arm-wince-pe  +FAIL: Unpredictable operations - ldr - arm
arm-wince-pe  +FAIL: PC-relative LDR from global
arm-wince-pe  +FAIL: Unpredictable operations - ldr - thumb
arm-wince-pe  +FAIL: ldr - thumb
arm-wince-pe  +FAIL: ldr - arm
arm-wince-pe  +FAIL: Unpredictable LDRD and STRD instructions. - ARM
arm-wince-pe  +FAIL: Accept lds<cc>sb mnemonics
arm-wince-pe  +FAIL: Accept lds<cc>sh mnemonics
arm-wince-pe  +FAIL: ARM load/store with pc base register
arm-wince-pe  +FAIL: arm little-endian fpconst
arm-wince-pe  +FAIL: ARM local label relocs to section symbol relocs (WinCE)
arm-wince-pe  +FAIL: gas/arm/macro-pld
arm-wince-pe  +FAIL: gas/arm/macro-vld1
arm-wince-pe  +FAIL: Macro scrubbing
arm-wince-pe  +FAIL: MRS/MSR test, architecture v6, ARM mode
arm-wince-pe  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode
arm-wince-pe  +FAIL: MRS/MSR test, architecture v7-A, ARM mode
arm-wince-pe  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode
arm-wince-pe  +FAIL: Overlapping multiplication operands for ARMv6
arm-wince-pe  +FAIL: Overlapping multiplication operands without architecture specification
arm-wince-pe  +FAIL: Disallow ARM instructions on V7M
arm-wince-pe  +FAIL: MINUS ZERO OFFSET
arm-wince-pe  +FAIL: OFFSET_IMM regression
arm-wince-pe  +FAIL: PR18256 - Bad code triggers internal error
arm-wince-pe  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction
arm-wince-pe  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction
arm-wince-pe  +FAIL: PUSH and POP
arm-wince-pe  +FAIL: Invalid use of r15 errors
arm-wince-pe  +FAIL: Case Sensitive Register Aliases
arm-wince-pe  +FAIL: Branch relaxation with alignment.
arm-wince-pe  +FAIL: Invalid relocations
arm-wince-pe  +FAIL: pc used in instructions with register-shifted register
arm-wince-pe  +FAIL: PR 12854: Extraneous shifts
arm-wince-pe  +FAIL: SP and PC registers special uses test.
arm-wince-pe  +FAIL: Invalid SP and PC operands test - ARM
arm-wince-pe  +FAIL: SRS instruction in ARM mode
arm-wince-pe  +FAIL: SRS instruction in Thumb-2 mode
arm-wince-pe  +FAIL: STM and LDM
arm-wince-pe  +FAIL: SWI/SVC instructions
arm-wince-pe  +FAIL: ARM Thumb-compat pseudos
arm-wince-pe  +FAIL: Thumb ARM-compat pseudos
arm-wince-pe  +FAIL: Thumb NOP
arm-wince-pe  +FAIL: Thumb-1 unified
arm-wince-pe  +FAIL: gas/arm/thumb2_bcond
arm-wince-pe  +FAIL: Invalid IT instructions
arm-wince-pe  +FAIL: Invalid IT instructions
arm-wince-pe  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2
arm-wince-pe  +FAIL: Invalid UDF operands
arm-wince-pe  +FAIL: Undefined local label error
arm-wince-pe  +FAIL: Upredictable Instructions
arm-wince-pe  +FAIL: macro test 1
arm-wince-pe  +FAIL: macro test 2
arm-wince-pe  +FAIL: macro test 3
arm-wince-pe  +FAIL: macro irp
arm-wince-pe  +FAIL: macro rept
arm-wince-pe  +FAIL: nested irp/irpc/rept
arm-wince-pe  +FAIL: macro vararg
arm-wince-pe  +FAIL: macro infinite recursion
arm-wince-pe  +FAIL: logical and in macro definition
arm-wince-pe  +FAIL: semi
arm-wince-pe  +FAIL: strings
arm-wince-pe  +FAIL: APP with macro without NO_APP
arm-wince-pe  +FAIL: APP with macro then NO_APP
arm-wince-pe  +FAIL: APP with macro then NO_APP then more code
arm-wince-pe  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file
arm-wince-pe  +FAIL: macros badarg
arm-wince-pe  +FAIL: macros dot
arm-wince-pe  +FAIL: macros end
arm-wince-pe  +FAIL: macros purge
arm-wince-pe  +FAIL: macros redef
arm-wince-pe  +FAIL: .exitm outside of a macro
arm-wince-pe  +FAIL: aligned common A
arm-wince-pe  +FAIL: aligned common B
arm-wince-pe  +FAIL: aligned common C
arm-wince-pe  +FAIL: aligned common D
arm-wince-pe  +FAIL: section alignment
arm-wince-pe  +FAIL: section alignment
arm-wince-pe  +FAIL: section exclude
arm-wince-pe  +FAIL: set directive in COFF
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed
arm-wince-pe  +FAIL: --gc-sections -r without -e
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/secrel1.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/exports.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/tlssec.s: assembly failed
arm-wince-pe  +FAIL: PE-COFF --export-dynamic warning
arm-wince-pe  +FAIL: PE-COFF Long section names (default)
arm-wince-pe  +FAIL: PE-COFF Long section names (disabled)
arm-wince-pe  +FAIL: PE-COFF Long section names (enabled)
arm-wince-pe  +FAIL: PE-COFF Long section names in objects (default)
arm-wince-pe  +FAIL: PE-COFF Long section names in objects (disabled)
arm-wince-pe  +FAIL: PE-COFF Long section names in objects (enabled)
arm-wince-pe  +FAIL: ld-pe/orphan
arm-wince-pe  +FAIL: ld-pe/orphan_nu
arm-wince-pe  +FAIL: ld-pe/pr19803
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/pr19803.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/non-c-lang-syms.s: assembly failed
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/alignof.s: assembly failed
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed
arm-wince-pe  +FAIL: ld-scripts/data
arm-wince-pe  +FAIL: ld-scripts/fill
arm-wince-pe  +FAIL: ld-scripts/fill16
arm-wince-pe  +FAIL: ld-scripts/default-script1
arm-wince-pe  +FAIL: ld-scripts/default-script2
arm-wince-pe  +FAIL: ld-scripts/default-script3
arm-wince-pe  +FAIL: ld-scripts/default-script4
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed
arm-wince-pe  +FAIL: ld-scripts/empty-address-1
arm-wince-pe  +FAIL: ld-scripts/empty-address-2a
arm-wince-pe  +FAIL: ld-scripts/empty-address-2b
arm-wince-pe  +FAIL: ld-scripts/empty-address-3a
arm-wince-pe  +FAIL: ld-scripts/empty-address-3b
arm-wince-pe  +FAIL: ld-scripts/empty-address-3c
arm-wince-pe  +FAIL: ld-scripts/expr1
arm-wince-pe  +FAIL: ld-scripts/expr2
arm-wince-pe  +FAIL: ld-scripts/sane1
arm-wince-pe  +FAIL: ld-scripts/assign-loc
arm-wince-pe  +FAIL: ld-scripts/pr14962
arm-wince-pe  +FAIL: ld-scripts/pr14962-2
arm-wince-pe  +FAIL: ld-scripts/pr22267
arm-wince-pe  +FAIL: ld-scripts/pr18963
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed
arm-wince-pe  +FAIL: include-1
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed
arm-wince-pe  +FAIL: ld-scripts/provide-1
arm-wince-pe  +FAIL: ld-scripts/provide-2
arm-wince-pe  +FAIL: ld-scripts/provide-4
arm-wince-pe  +FAIL: ld-scripts/provide-5
arm-wince-pe  +FAIL: ld-scripts/provide-6
arm-wince-pe  +FAIL: ld-scripts/provide-7
arm-wince-pe  +FAIL: ld-scripts/provide-8
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed
arm-wince-pe  +FAIL: ld-scripts/size-1
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed
arm-wince-pe  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/weak1.s: assembly failed
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed
arm-wince-pe  +FAIL: --entry foo archive
arm-wince-pe  +FAIL: --entry foo -u foo archive
arm-wince-pe  +FAIL: --entry foo
arm-wince-pe  +FAIL: --entry foo -u foo
arm-wince-pe  +FAIL: --entry 0x0
arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed
arm-wince-pe  +FAIL: Check require-defined with an undefined symbol
arm-wince-pe  +FAIL: Check require-defined can require a symbol from an object
arm-wince-pe  +FAIL: Check require-defined does no error on a defined symbol
arm-wince-pe  +FAIL: Check require-defined can require a symbol from an archive
arm-wince-pe  +FAIL: Check require-defined can require two symbols
arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/weak-undef.s: assembly failed


-- 
Alan Modra
Australia Development Lab, IBM
Christophe Lyon March 2, 2018, 9:12 a.m. | #4
On 2 March 2018 at 00:26, Alan Modra <amodra@gmail.com> wrote:
> On Thu, Mar 01, 2018 at 04:27:44PM +0000, Thomas Preudhomme wrote:

>> Hi Nick,

>>

>> Thank you for the approval and the quick review. I've noticed one more issue

>> in mark_feature_used which was referring to selected architecture but

>> testing cpu_variant (which only represents what is allowed). I've considered

>> this to be an obvious fix so have committed the patch with that comment fix.

>

> I'm guessing the following is due to this patch.  ;-)

>


I've noticed similar regressions and came to the same conclusions:
https://ci.linaro.org/job/tcwg-compare-results/3860/artifact/artifacts/logs/0-report.html


> arm-nto  +FAIL: thumb2-cond (assembling)

> arm-nto  +FAIL: multiple input files

> arm-nto  +FAIL: skip rvct symbol

> arm-nto  +FAIL: nm (assembling)

> arm-nto  +FAIL: nm --size-sort (assembling)

> arm-nto  +ERROR: objdump can not recognize bintest.o

> arm-nto  +ERROR: objdump can not recognize bintest.o

> arm-nto  +FAIL: copy with setting section flags 2

> arm-nto  +FAIL: copy with setting section flags 3

> arm-nto  +FAIL: strip --strip-unneeded on common symbol

> arm-nto  +FAIL: --localize-hidden test 2

> arm-nto  +FAIL: objdump (assembling)

> arm-nto  +FAIL: size (assembling)

> arm-nto  +FAIL: pcrel values in assignment

> arm-nto  +FAIL: simplifiable double subtraction

> arm-nto  +FAIL: simplifiable double subtraction (-a)

> arm-nto  +FAIL: simple FP constants

> arm-nto  +FAIL: difference of two undefined symbols

> arm-nto  +FAIL: .equiv for symbol already set to another one

> arm-nto  +FAIL: .equiv for symbol already set to an expression

> arm-nto  +FAIL: .equ for symbol already set

> arm-nto  +FAIL: .equ for symbol already set through .eqv

> arm-nto  +FAIL: .eqv support

> arm-nto  +FAIL: .eqv for symbol already set

> arm-nto  +FAIL: == assignment support

> arm-nto  +FAIL: == assignment for symbol already set

> arm-nto  +FAIL: forward references

> arm-nto  +FAIL: forward expression

> arm-nto  +FAIL: .equ redefinitions

> arm-nto  +FAIL: .equ redefinitions (2)

> arm-nto  +FAIL: .equ redefinitions (3)

> arm-nto  +FAIL: .set for symbol already used as label

> arm-nto  +FAIL: .set for symbol already defined through .comm

> arm-nto  +FAIL: comment.s: comments in listings

> arm-nto  +FAIL: general info section in listings

> arm-nto  +FAIL: difference between forward references

> arm-nto  +FAIL: struct

> arm-nto  +FAIL: align

> arm-nto  +FAIL: align2

> arm-nto  +FAIL: alternate macro syntax

> arm-nto  +FAIL: conditional listings

> arm-nto  +FAIL: incbin

> arm-nto  +FAIL: assignment tests

> arm-nto  +FAIL: .sleb128 tests

> arm-nto  +FAIL: .sleb128 tests (2)

> arm-nto  +FAIL: .sleb128 tests (3)

> arm-nto  +FAIL: .sleb128 tests (4)

> arm-nto  +FAIL: .sleb128 tests (5)

> arm-nto  +FAIL: .sleb128 tests (7)

> arm-nto  +FAIL: .sleb128 tests (8)

> arm-nto  +FAIL: undefined symbols in sleb128 directive

> arm-nto  +FAIL: relax .uleb128

> arm-nto  +FAIL: .quad tests

> arm-nto  +FAIL: octa bignum

> arm-nto  +FAIL: weakref tests, relocations

> arm-nto  +FAIL: weakref tests, global syms

> arm-nto  +FAIL: weakref tests, local syms

> arm-nto  +FAIL: weakref tests, strong undefined syms

> arm-nto  +FAIL: weakref tests, weak undefined syms

> arm-nto  +FAIL: e: would close weakref loop: e => a => b => c => d => e

> arm-nto  +FAIL: a: would close weakref loop: a => b => c => d => e => a

> arm-nto  +FAIL: is already defined

> arm-nto  +FAIL: .strings tests

> arm-nto  +FAIL: quoted symbol names

> arm-nto  +FAIL: all pr20312

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 3)

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 4)

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 5)

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 6)

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 7)

> arm-nto  +FAIL: gas/all/err-1.s (test for excess errors)

> arm-nto  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)

> arm-nto  +FAIL: gas/all/err-fakelabel.s (test for excess errors)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)

> arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)

> arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)

> arm-nto  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)

> arm-nto  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)

> arm-nto  +FAIL: gas/all/err-sizeof.s (test for excess errors)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for errors, line 4)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)

> arm-nto  +FAIL: gas/all/warn-1.s (test for excess errors)

> arm-nto  +FAIL: .org test 1

> arm-nto  +FAIL: .org test 2

> arm-nto  +FAIL: .org test 3

> arm-nto  +FAIL: .org test 4

> arm-nto  +FAIL: .org test 5

> arm-nto  +FAIL: .org test 6

> arm-nto  +FAIL: fill test with forward labels

> arm-nto  +FAIL: Two register form of data processing instruction with register shifted register operand

> arm-nto  +FAIL: ADDS relocations against local symbols for armv7-m

> arm-nto  +FAIL: ADDS relocations against local symbols for armv6s-m

> arm-nto  +FAIL: Invalid Immediate field for flag-setting add,sub

> arm-nto  +FAIL: Invalid use of ADR and ADRL

> arm-nto  +FAIL: ADR

> arm-nto  +FAIL: ADRL

> arm-nto  +FAIL: 64 Bytes alignment test

> arm-nto  +FAIL: ARMv6-M

> arm-nto  +FAIL: ARM Integer division instructions

> arm-nto  +FAIL: Test automatic IT generation in Thumb-1 architectures.

> arm-nto  +FAIL: ARM IT instruction

> arm-nto  +FAIL: ARM mode Thumb errors

> arm-nto  +FAIL: Valid v7-A+IDIV

> arm-nto  +FAIL: Valid v7e-m+fpv5-d16

> arm-nto  +FAIL: gas/arm/armv7e-m+fpv5-sp-d16

> arm-nto  +FAIL: Valid v8-a+cryptov1

> arm-nto  +FAIL: Valid v8-a+pan

> arm-nto  +FAIL: gas/arm/armv8a-automatic-hlt

> arm-nto  +FAIL: gas/arm/armv8a-automatic-lda

> arm-nto  +FAIL: gas/arm/attr-syntax

> arm-nto  +FAIL: gas/arm/automatic-bw

> arm-nto  +FAIL: gas/arm/automatic-cbz

> arm-nto  +FAIL: gas/arm/automatic-clrex

> arm-nto  +FAIL: gas/arm/automatic-lda

> arm-nto  +FAIL: gas/arm/automatic-ldaex

> arm-nto  +FAIL: gas/arm/automatic-ldaexb

> arm-nto  +FAIL: gas/arm/automatic-ldrex

> arm-nto  +FAIL: gas/arm/automatic-ldrexd

> arm-nto  +FAIL: gas/arm/automatic-movw

> arm-nto  +FAIL: gas/arm/automatic-sdiv

> arm-nto  +FAIL: gas/arm/automatic-strexb

> arm-nto  +FAIL: Backslash-at for ARM

> arm-nto  +FAIL: Bad barrier options (Thumb)

> arm-nto  +FAIL: Bad barrier options (ARM)

> arm-nto  +FAIL: bignums

> arm-nto  +FAIL: BLX encoding

> arm-nto  +FAIL: CSDB

> arm-nto  +FAIL: Deprecated swp{b} instructions

> arm-nto  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM

> arm-nto  +FAIL: Data disassembler test (no symbols)

> arm-nto  +FAIL: Data disassembler test (function symbol)

> arm-nto  +FAIL: Data disassembler test (with mapping symbol)

> arm-nto  +FAIL: gas/arm/eabi_attr_1

> arm-nto  +FAIL: El Segundo instructions

> arm-nto  +FAIL: Group relocation tests, encoding failures (alu)

> arm-nto  +FAIL: Group relocation tests, parsing failures (alu)

> arm-nto  +FAIL: Group relocation tests (alu)

> arm-nto  +FAIL: Group relocation tests, encoding failures (ldc)

> arm-nto  +FAIL: Group relocation tests, parsing failures (ldc)

> arm-nto  +FAIL: Group relocation tests (ldc)

> arm-nto  +FAIL: Group relocation tests, encoding failures (ldr)

> arm-nto  +FAIL: Group relocation tests, parsing failures (ldr)

> arm-nto  +FAIL: Group relocation tests (ldr)

> arm-nto  +FAIL: Group relocation tests, encoding failures (ldrs)

> arm-nto  +FAIL: Group relocation tests, parsing failures (ldrs)

> arm-nto  +FAIL: Group relocation tests (ldrs)

> arm-nto  +FAIL: immediate expressions

> arm-nto  +FAIL: modified immediate constants

> arm-nto  +FAIL: invalid instruction recovery test - ARM version

> arm-nto  +FAIL: invalid instruction recovery test - Thumb version

> arm-nto  +FAIL: .inst pseudo-opcode validations test

> arm-nto  +FAIL: .inst pseudo-opcode with automatic IT blocks test

> arm-nto  +FAIL: .inst pseudo-opcode test 1 - big endian version

> arm-nto  +FAIL: .inst pseudo-opcode test 1

> arm-nto  +FAIL: Erratum 752419: Warn Loads with writebacks to SP

> arm-nto  +FAIL: Unpredictable operations - ldr - arm

> arm-nto  +FAIL: PC-relative LDR from global

> arm-nto  +FAIL: Unpredictable operations - ldr - thumb

> arm-nto  +FAIL: ldr - thumb

> arm-nto  +FAIL: ldr - arm

> arm-nto  +FAIL: Unpredictable LDRD and STRD instructions. - ARM

> arm-nto  +FAIL: Accept lds<cc>sb mnemonics

> arm-nto  +FAIL: Accept lds<cc>sh mnemonics

> arm-nto  +FAIL: ARM load/store with 0 offset

> arm-nto  +FAIL: ARM load/store with pc base register

> arm-nto  +FAIL: Relocations against local function symbols

> arm-nto  +FAIL: ARM local label relocs to section symbol relocs (ELF)

> arm-nto  +FAIL: gas/arm/macro-pld

> arm-nto  +FAIL: gas/arm/macro-vld1

> arm-nto  +FAIL: Macro scrubbing

> arm-nto  +FAIL: ARM Mapping Symbols

> arm-nto  +FAIL: ARM Mapping Symbols Test 2

> arm-nto  +FAIL: ARM Mapping Symbols Test 3

> arm-nto  +FAIL: ARM Mapping Symbols Test 4

> arm-nto  +FAIL: ARM Mapping Symbols for .short (ELF version)

> arm-nto  +FAIL: MOVS relocations against local symbols for armv7-m

> arm-nto  +FAIL: MOVS relocations against local symbols for armv6s-m

> arm-nto  +FAIL: MOVW/MOVT relocations against local symbols

> arm-nto  +FAIL: MRS/MSR test, architecture v6, ARM mode

> arm-nto  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode

> arm-nto  +FAIL: MRS/MSR test, architecture v7-A, ARM mode

> arm-nto  +FAIL: MRS/MSR test, architecture v6t2, Thumb mode

> arm-nto  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode

> arm-nto  +FAIL: MRS/MSR test, architecture v7-M, Thumb mode

> arm-nto  +FAIL: MRS/MSR test, architecture v7e-M, Thumb mode

> arm-nto  +FAIL: Overlapping multiplication operands for ARMv6

> arm-nto  +FAIL: Overlapping multiplication operands without architecture specification

> arm-nto  +FAIL: Disallow ARM instructions on V7M

> arm-nto  +FAIL: ARM Mapping Symbols Ignored

> arm-nto  +FAIL: NOP<c> instructions

> arm-nto  +FAIL: MINUS ZERO OFFSET

> arm-nto  +FAIL: OFFSET_IMM regression

> arm-nto  +FAIL: PIC

> arm-nto  +FAIL: 26-bit teq/cmn/tst/cmp instructions

> arm-nto  +FAIL: Thumb branch to PLT

> arm-nto  +FAIL: PR18256 - Bad code triggers internal error

> arm-nto  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction

> arm-nto  +FAIL: ADR(L) for Thumb functions

> arm-nto  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction

> arm-nto  +FAIL: PR9722: Generation of Thumb NOP instruction

> arm-nto  +FAIL: PUSH and POP

> arm-nto  +FAIL: Invalid use of r15 errors

> arm-nto  +FAIL: Case Sensitive Register Aliases

> arm-nto  +FAIL: Branch relaxation with alignment.

> arm-nto  +FAIL: Invalid relocations

> arm-nto  +FAIL: pc used in instructions with register-shifted register

> arm-nto  +FAIL: PR 12854: Extraneous shifts

> arm-nto  +FAIL: SP and PC registers special uses test.

> arm-nto  +FAIL: Invalid SP and PC operands test - ARM

> arm-nto  +FAIL: SRS instruction in ARM mode

> arm-nto  +FAIL: SRS instruction in Thumb-2 mode

> arm-nto  +FAIL: STM and LDM

> arm-nto  +FAIL: STREXH/STREXB. - Thumb

> arm-nto  +FAIL: SWI/SVC instructions

> arm-nto  +FAIL: Thumb-2 branch to constant address

> arm-nto  +FAIL: TARGET reloc

> arm-nto  +FAIL: ARM Thumb-compat pseudos

> arm-nto  +FAIL: Thumb ARM-compat pseudos

> arm-nto  +FAIL: Out of range Thumb branches (PR 12848)

> arm-nto  +FAIL: Thumb NOP

> arm-nto  +FAIL: Wide instruction rejected in non-Thumb2 cores.

> arm-nto  +FAIL: Wide instruction acceptance in Thumb-2 cores

> arm-nto  +FAIL: Thumb-1 unified

> arm-nto  +FAIL: gas/arm/thumb2_bcond

> arm-nto  +FAIL: Invalid IT instructions

> arm-nto  +FAIL: Invalid IT instructions

> arm-nto  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2

> arm-nto  +FAIL: gas/arm/thumbver

> arm-nto  +FAIL: TLS

> arm-nto  +FAIL: Invalid UDF operands

> arm-nto  +FAIL: Undefined local label error

> arm-nto  +FAIL: Upredictable Instructions

> arm-nto  +FAIL: Unwind table generation

> arm-nto  +FAIL: gas/arm/v4bx

> arm-nto  +FAIL: VCMP immediate without prefix

> arm-nto  +FAIL: Thumb branch to weak

> arm-nto  +FAIL: adr of weak

> arm-nto  +FAIL: macro test 1

> arm-nto  +FAIL: macro test 2

> arm-nto  +FAIL: macro test 3

> arm-nto  +FAIL: macro irp

> arm-nto  +FAIL: macro rept

> arm-nto  +FAIL: nested irp/irpc/rept

> arm-nto  +FAIL: macro vararg

> arm-nto  +FAIL: macro infinite recursion

> arm-nto  +FAIL: logical and in macro definition

> arm-nto  +FAIL: semi

> arm-nto  +FAIL: strings

> arm-nto  +FAIL: APP with macro without NO_APP

> arm-nto  +FAIL: APP with macro then NO_APP

> arm-nto  +FAIL: APP with macro then NO_APP then more code

> arm-nto  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file

> arm-nto  +FAIL: macros badarg

> arm-nto  +FAIL: macros dot

> arm-nto  +FAIL: macros end

> arm-nto  +FAIL: macros purge

> arm-nto  +FAIL: macros redef

> arm-nto  +FAIL: .exitm outside of a macro

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed

> arm-nto  +FAIL: --gc-sections -r without -e

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed

> arm-nto  +FAIL: ld-scripts/data

> arm-nto  +FAIL: ld-scripts/fill

> arm-nto  +FAIL: ld-scripts/fill16

> arm-nto  +FAIL: ld-scripts/default-script1

> arm-nto  +FAIL: ld-scripts/default-script2

> arm-nto  +FAIL: ld-scripts/default-script3

> arm-nto  +FAIL: ld-scripts/default-script4

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed

> arm-nto  +FAIL: ld-scripts/empty-address-1

> arm-nto  +FAIL: ld-scripts/empty-address-2a

> arm-nto  +FAIL: ld-scripts/empty-address-2b

> arm-nto  +FAIL: ld-scripts/empty-address-3a

> arm-nto  +FAIL: ld-scripts/empty-address-3b

> arm-nto  +FAIL: ld-scripts/empty-address-3c

> arm-nto  +FAIL: ld-scripts/expr1

> arm-nto  +FAIL: ld-scripts/expr2

> arm-nto  +FAIL: ld-scripts/sane1

> arm-nto  +FAIL: ld-scripts/assign-loc

> arm-nto  +FAIL: ld-scripts/pr14962

> arm-nto  +FAIL: ld-scripts/pr14962-2

> arm-nto  +FAIL: ld-scripts/pr22267

> arm-nto  +FAIL: ld-scripts/pr18963

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed

> arm-nto  +FAIL: include-1

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed

> arm-nto  +FAIL: ld-scripts/provide-1

> arm-nto  +FAIL: ld-scripts/provide-2

> arm-nto  +FAIL: ld-scripts/provide-4

> arm-nto  +FAIL: ld-scripts/provide-5

> arm-nto  +FAIL: ld-scripts/provide-6

> arm-nto  +FAIL: ld-scripts/provide-7

> arm-nto  +FAIL: ld-scripts/provide-8

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed

> arm-nto  +FAIL: ld-scripts/section-match-1

> arm-nto  +FAIL: ld-scripts/size-1

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed

> arm-nto  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-nto  +FAIL: --entry foo archive

> arm-nto  +FAIL: --entry foo -u foo archive

> arm-nto  +FAIL: --entry foo

> arm-nto  +FAIL: --entry foo -u foo

> arm-nto  +FAIL: --entry 0x0

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-nto  +FAIL: Check require-defined with an undefined symbol

> arm-nto  +FAIL: Check require-defined can require a symbol from an object

> arm-nto  +FAIL: Check require-defined does no error on a defined symbol

> arm-nto  +FAIL: Check require-defined can require a symbol from an archive

> arm-nto  +FAIL: Check require-defined can require two symbols

> arm-pe  +FAIL: thumb2-cond (assembling)

> arm-pe  +FAIL: multiple input files

> arm-pe  +FAIL: skip rvct symbol

> arm-pe  +FAIL: dlltool (version.dll)

> arm-pe  +FAIL: dlltool -p (execution)

> arm-pe  +FAIL: nm (assembling)

> arm-pe  +FAIL: nm --size-sort (assembling)

> arm-pe  +ERROR: objdump can not recognize bintest.o

> arm-pe  +ERROR: objdump can not recognize bintest.o

> arm-pe  +FAIL: copy with setting section flags 2

> arm-pe  +FAIL: strip --strip-unneeded on common symbol

> arm-pe  +FAIL: --localize-hidden test 2

> arm-pe  +FAIL: objdump (assembling)

> arm-pe  +FAIL: size (assembling)

> arm-pe  +FAIL: pcrel values in assignment

> arm-pe  +FAIL: simplifiable double subtraction

> arm-pe  +FAIL: simplifiable double subtraction (-a)

> arm-pe  +FAIL: simple FP constants

> arm-pe  +FAIL: difference of two undefined symbols

> arm-pe  +FAIL: .equiv for symbol already set to another one

> arm-pe  +FAIL: .equiv for symbol already set to an expression

> arm-pe  +FAIL: .equ for symbol already set

> arm-pe  +FAIL: .equ for symbol already set through .eqv

> arm-pe  +FAIL: .eqv support

> arm-pe  +FAIL: .eqv for symbol already set

> arm-pe  +FAIL: == assignment support

> arm-pe  +FAIL: == assignment for symbol already set

> arm-pe  +FAIL: forward references

> arm-pe  +FAIL: forward expression

> arm-pe  +FAIL: .equ redefinitions

> arm-pe  +FAIL: .equ redefinitions (3)

> arm-pe  +FAIL: .set for symbol already used as label

> arm-pe  +FAIL: .set for symbol already defined through .comm

> arm-pe  +FAIL: comment.s: comments in listings

> arm-pe  +FAIL: general info section in listings

> arm-pe  +FAIL: difference between forward references

> arm-pe  +FAIL: struct

> arm-pe  +FAIL: align

> arm-pe  +FAIL: align2

> arm-pe  +FAIL: alternate macro syntax

> arm-pe  +FAIL: conditional listings

> arm-pe  +FAIL: incbin

> arm-pe  +FAIL: assignment tests

> arm-pe  +FAIL: .sleb128 tests

> arm-pe  +FAIL: .sleb128 tests (2)

> arm-pe  +FAIL: .sleb128 tests (3)

> arm-pe  +FAIL: .sleb128 tests (4)

> arm-pe  +FAIL: .sleb128 tests (5)

> arm-pe  +FAIL: .sleb128 tests (7)

> arm-pe  +FAIL: .sleb128 tests (8)

> arm-pe  +FAIL: undefined symbols in sleb128 directive

> arm-pe  +FAIL: relax .uleb128

> arm-pe  +FAIL: .quad tests

> arm-pe  +FAIL: octa bignum

> arm-pe  +FAIL: weakref tests, relocations

> arm-pe  +FAIL: weakref tests, global syms

> arm-pe  +FAIL: weakref tests, local syms

> arm-pe  +FAIL: weakref tests, strong undefined syms

> arm-pe  +FAIL: weakref tests, weak undefined syms

> arm-pe  +FAIL: e: would close weakref loop: e => a => b => c => d => e

> arm-pe  +FAIL: a: would close weakref loop: a => b => c => d => e => a

> arm-pe  +FAIL: is already defined

> arm-pe  +FAIL: .strings tests

> arm-pe  +FAIL: quoted symbol names

> arm-pe  +FAIL: all pr20312

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 3)

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 4)

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 5)

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 6)

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 7)

> arm-pe  +FAIL: gas/all/err-1.s (test for excess errors)

> arm-pe  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)

> arm-pe  +FAIL: gas/all/err-fakelabel.s (test for excess errors)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)

> arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)

> arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)

> arm-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)

> arm-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)

> arm-pe  +FAIL: gas/all/err-sizeof.s (test for excess errors)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for errors, line 4)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)

> arm-pe  +FAIL: gas/all/warn-1.s (test for excess errors)

> arm-pe  +FAIL: .org test 1

> arm-pe  +FAIL: .org test 2

> arm-pe  +FAIL: .org test 3

> arm-pe  +FAIL: .org test 4

> arm-pe  +FAIL: .org test 5

> arm-pe  +FAIL: .org test 6

> arm-pe  +FAIL: fill test with forward labels

> arm-pe  +FAIL: Two register form of data processing instruction with register shifted register operand

> arm-pe  +FAIL: Invalid use of ADR and ADRL

> arm-pe  +FAIL: ADR

> arm-pe  +FAIL: ADRL

> arm-pe  +FAIL: ARMv6-M

> arm-pe  +FAIL: ARM Integer division instructions

> arm-pe  +FAIL: Test automatic IT generation in Thumb-1 architectures.

> arm-pe  +FAIL: ARM mode Thumb errors

> arm-pe  +FAIL: Valid v7-A+IDIV

> arm-pe  +FAIL: Valid v8-a+pan

> arm-pe  +FAIL: Backslash-at for ARM

> arm-pe  +FAIL: Deprecated swp{b} instructions

> arm-pe  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM

> arm-pe  +FAIL: El Segundo instructions

> arm-pe  +FAIL: immediate expressions

> arm-pe  +FAIL: modified immediate constants

> arm-pe  +FAIL: Erratum 752419: Warn Loads with writebacks to SP

> arm-pe  +FAIL: Unpredictable operations - ldr - arm

> arm-pe  +FAIL: PC-relative LDR from global

> arm-pe  +FAIL: Unpredictable operations - ldr - thumb

> arm-pe  +FAIL: ldr - thumb

> arm-pe  +FAIL: ldr - arm

> arm-pe  +FAIL: Unpredictable LDRD and STRD instructions. - ARM

> arm-pe  +FAIL: Accept lds<cc>sb mnemonics

> arm-pe  +FAIL: Accept lds<cc>sh mnemonics

> arm-pe  +FAIL: ARM load/store with pc base register

> arm-pe  +FAIL: arm little-endian fpconst

> arm-pe  +FAIL: ARM local label relocs to section symbol relocs (COFF)

> arm-pe  +FAIL: gas/arm/macro-pld

> arm-pe  +FAIL: gas/arm/macro-vld1

> arm-pe  +FAIL: Macro scrubbing

> arm-pe  +FAIL: MRS/MSR test, architecture v6, ARM mode

> arm-pe  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode

> arm-pe  +FAIL: MRS/MSR test, architecture v7-A, ARM mode

> arm-pe  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode

> arm-pe  +FAIL: Overlapping multiplication operands for ARMv6

> arm-pe  +FAIL: Overlapping multiplication operands without architecture specification

> arm-pe  +FAIL: Disallow ARM instructions on V7M

> arm-pe  +FAIL: MINUS ZERO OFFSET

> arm-pe  +FAIL: OFFSET_IMM regression

> arm-pe  +FAIL: PR18256 - Bad code triggers internal error

> arm-pe  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction

> arm-pe  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction

> arm-pe  +FAIL: PUSH and POP

> arm-pe  +FAIL: Invalid use of r15 errors

> arm-pe  +FAIL: Case Sensitive Register Aliases

> arm-pe  +FAIL: Branch relaxation with alignment.

> arm-pe  +FAIL: Invalid relocations

> arm-pe  +FAIL: pc used in instructions with register-shifted register

> arm-pe  +FAIL: PR 12854: Extraneous shifts

> arm-pe  +FAIL: SP and PC registers special uses test.

> arm-pe  +FAIL: Invalid SP and PC operands test - ARM

> arm-pe  +FAIL: SRS instruction in ARM mode

> arm-pe  +FAIL: SRS instruction in Thumb-2 mode

> arm-pe  +FAIL: STM and LDM

> arm-pe  +FAIL: SWI/SVC instructions

> arm-pe  +FAIL: ARM Thumb-compat pseudos

> arm-pe  +FAIL: Thumb ARM-compat pseudos

> arm-pe  +FAIL: Thumb NOP

> arm-pe  +FAIL: Thumb-1 unified

> arm-pe  +FAIL: gas/arm/thumb2_bcond

> arm-pe  +FAIL: Invalid IT instructions

> arm-pe  +FAIL: Invalid IT instructions

> arm-pe  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2

> arm-pe  +FAIL: Invalid UDF operands

> arm-pe  +FAIL: Undefined local label error

> arm-pe  +FAIL: Upredictable Instructions

> arm-pe  +FAIL: macro test 1

> arm-pe  +FAIL: macro test 2

> arm-pe  +FAIL: macro test 3

> arm-pe  +FAIL: macro irp

> arm-pe  +FAIL: macro rept

> arm-pe  +FAIL: nested irp/irpc/rept

> arm-pe  +FAIL: macro vararg

> arm-pe  +FAIL: macro infinite recursion

> arm-pe  +FAIL: logical and in macro definition

> arm-pe  +FAIL: semi

> arm-pe  +FAIL: strings

> arm-pe  +FAIL: APP with macro without NO_APP

> arm-pe  +FAIL: APP with macro then NO_APP

> arm-pe  +FAIL: APP with macro then NO_APP then more code

> arm-pe  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file

> arm-pe  +FAIL: macros badarg

> arm-pe  +FAIL: macros dot

> arm-pe  +FAIL: macros end

> arm-pe  +FAIL: macros purge

> arm-pe  +FAIL: macros redef

> arm-pe  +FAIL: .exitm outside of a macro

> arm-pe  +FAIL: aligned common A

> arm-pe  +FAIL: aligned common B

> arm-pe  +FAIL: aligned common C

> arm-pe  +FAIL: aligned common D

> arm-pe  +FAIL: section alignment

> arm-pe  +FAIL: section alignment

> arm-pe  +FAIL: section exclude

> arm-pe  +FAIL: set directive in COFF

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed

> arm-pe  +FAIL: --gc-sections -r without -e

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed

> arm-pe  +FAIL: PE-COFF --export-dynamic warning

> arm-pe  +FAIL: PE-COFF Long section names (default)

> arm-pe  +FAIL: PE-COFF Long section names (disabled)

> arm-pe  +FAIL: PE-COFF Long section names (enabled)

> arm-pe  +FAIL: PE-COFF Long section names in objects (default)

> arm-pe  +FAIL: PE-COFF Long section names in objects (disabled)

> arm-pe  +FAIL: PE-COFF Long section names in objects (enabled)

> arm-pe  +FAIL: ld-pe/orphan

> arm-pe  +FAIL: ld-pe/orphan_nu

> arm-pe  +FAIL: ld-pe/pr19803

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/pr19803.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/non-c-lang-syms.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/alignof.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed

> arm-pe  +FAIL: ld-scripts/data

> arm-pe  +FAIL: ld-scripts/fill

> arm-pe  +FAIL: ld-scripts/fill16

> arm-pe  +FAIL: ld-scripts/default-script1

> arm-pe  +FAIL: ld-scripts/default-script2

> arm-pe  +FAIL: ld-scripts/default-script3

> arm-pe  +FAIL: ld-scripts/default-script4

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed

> arm-pe  +FAIL: ld-scripts/empty-address-1

> arm-pe  +FAIL: ld-scripts/empty-address-2a

> arm-pe  +FAIL: ld-scripts/empty-address-2b

> arm-pe  +FAIL: ld-scripts/empty-address-3a

> arm-pe  +FAIL: ld-scripts/empty-address-3b

> arm-pe  +FAIL: ld-scripts/empty-address-3c

> arm-pe  +FAIL: ld-scripts/expr1

> arm-pe  +FAIL: ld-scripts/expr2

> arm-pe  +FAIL: ld-scripts/sane1

> arm-pe  +FAIL: ld-scripts/assign-loc

> arm-pe  +FAIL: ld-scripts/pr14962

> arm-pe  +FAIL: ld-scripts/pr14962-2

> arm-pe  +FAIL: ld-scripts/pr22267

> arm-pe  +FAIL: ld-scripts/pr18963

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed

> arm-pe  +FAIL: include-1

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed

> arm-pe  +FAIL: ld-scripts/provide-1

> arm-pe  +FAIL: ld-scripts/provide-2

> arm-pe  +FAIL: ld-scripts/provide-4

> arm-pe  +FAIL: ld-scripts/provide-5

> arm-pe  +FAIL: ld-scripts/provide-6

> arm-pe  +FAIL: ld-scripts/provide-7

> arm-pe  +FAIL: ld-scripts/provide-8

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed

> arm-pe  +FAIL: ld-scripts/size-1

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed

> arm-pe  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/weak1.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-pe  +FAIL: --entry foo archive

> arm-pe  +FAIL: --entry foo -u foo archive

> arm-pe  +FAIL: --entry foo

> arm-pe  +FAIL: --entry foo -u foo

> arm-pe  +FAIL: --entry 0x0

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-pe  +FAIL: Check require-defined with an undefined symbol

> arm-pe  +FAIL: Check require-defined can require a symbol from an object

> arm-pe  +FAIL: Check require-defined does no error on a defined symbol

> arm-pe  +FAIL: Check require-defined can require a symbol from an archive

> arm-pe  +FAIL: Check require-defined can require two symbols

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/weak-undef.s: assembly failed

> arm-wince-pe  +FAIL: thumb2-cond (assembling)

> arm-wince-pe  +FAIL: multiple input files

> arm-wince-pe  +FAIL: skip rvct symbol

> arm-wince-pe  +FAIL: dlltool (version.dll)

> arm-wince-pe  +FAIL: dlltool -p (execution)

> arm-wince-pe  +FAIL: nm (assembling)

> arm-wince-pe  +FAIL: nm --size-sort (assembling)

> arm-wince-pe  +ERROR: objdump can not recognize bintest.o

> arm-wince-pe  +ERROR: objdump can not recognize bintest.o

> arm-wince-pe  +FAIL: copy with setting section flags 2

> arm-wince-pe  +FAIL: strip --strip-unneeded on common symbol

> arm-wince-pe  +FAIL: --localize-hidden test 2

> arm-wince-pe  +FAIL: objdump (assembling)

> arm-wince-pe  +FAIL: size (assembling)

> arm-wince-pe  +FAIL: pcrel values in assignment

> arm-wince-pe  +FAIL: simplifiable double subtraction

> arm-wince-pe  +FAIL: simplifiable double subtraction (-a)

> arm-wince-pe  +FAIL: simple FP constants

> arm-wince-pe  +FAIL: difference of two undefined symbols

> arm-wince-pe  +FAIL: .equiv for symbol already set to another one

> arm-wince-pe  +FAIL: .equiv for symbol already set to an expression

> arm-wince-pe  +FAIL: .equ for symbol already set

> arm-wince-pe  +FAIL: .equ for symbol already set through .eqv

> arm-wince-pe  +FAIL: .eqv support

> arm-wince-pe  +FAIL: .eqv for symbol already set

> arm-wince-pe  +FAIL: == assignment support

> arm-wince-pe  +FAIL: == assignment for symbol already set

> arm-wince-pe  +FAIL: forward references

> arm-wince-pe  +FAIL: forward expression

> arm-wince-pe  +FAIL: .equ redefinitions

> arm-wince-pe  +FAIL: .equ redefinitions (2)

> arm-wince-pe  +FAIL: .equ redefinitions (3)

> arm-wince-pe  +FAIL: .set for symbol already used as label

> arm-wince-pe  +FAIL: .set for symbol already defined through .comm

> arm-wince-pe  +FAIL: comment.s: comments in listings

> arm-wince-pe  +FAIL: general info section in listings

> arm-wince-pe  +FAIL: difference between forward references

> arm-wince-pe  +FAIL: struct

> arm-wince-pe  +FAIL: align

> arm-wince-pe  +FAIL: align2

> arm-wince-pe  +FAIL: alternate macro syntax

> arm-wince-pe  +FAIL: conditional listings

> arm-wince-pe  +FAIL: incbin

> arm-wince-pe  +FAIL: assignment tests

> arm-wince-pe  +FAIL: .sleb128 tests

> arm-wince-pe  +FAIL: .sleb128 tests (2)

> arm-wince-pe  +FAIL: .sleb128 tests (3)

> arm-wince-pe  +FAIL: .sleb128 tests (4)

> arm-wince-pe  +FAIL: .sleb128 tests (5)

> arm-wince-pe  +FAIL: .sleb128 tests (7)

> arm-wince-pe  +FAIL: .sleb128 tests (8)

> arm-wince-pe  +FAIL: undefined symbols in sleb128 directive

> arm-wince-pe  +FAIL: relax .uleb128

> arm-wince-pe  +FAIL: .quad tests

> arm-wince-pe  +FAIL: octa bignum

> arm-wince-pe  +FAIL: weakref tests, relocations

> arm-wince-pe  +FAIL: weakref tests, global syms

> arm-wince-pe  +FAIL: weakref tests, local syms

> arm-wince-pe  +FAIL: weakref tests, strong undefined syms

> arm-wince-pe  +FAIL: weakref tests, weak undefined syms

> arm-wince-pe  +FAIL: e: would close weakref loop: e => a => b => c => d => e

> arm-wince-pe  +FAIL: a: would close weakref loop: a => b => c => d => e => a

> arm-wince-pe  +FAIL: is already defined

> arm-wince-pe  +FAIL: .strings tests

> arm-wince-pe  +FAIL: quoted symbol names

> arm-wince-pe  +FAIL: all pr20312

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 3)

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 4)

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 5)

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 6)

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 7)

> arm-wince-pe  +FAIL: gas/all/err-1.s (test for excess errors)

> arm-wince-pe  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)

> arm-wince-pe  +FAIL: gas/all/err-fakelabel.s (test for excess errors)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s (test for excess errors)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for errors, line 4)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)

> arm-wince-pe  +FAIL: gas/all/warn-1.s (test for excess errors)

> arm-wince-pe  +FAIL: .org test 1

> arm-wince-pe  +FAIL: .org test 2

> arm-wince-pe  +FAIL: .org test 3

> arm-wince-pe  +FAIL: .org test 4

> arm-wince-pe  +FAIL: .org test 5

> arm-wince-pe  +FAIL: .org test 6

> arm-wince-pe  +FAIL: fill test with forward labels

> arm-wince-pe  +FAIL: Two register form of data processing instruction with register shifted register operand

> arm-wince-pe  +FAIL: Invalid use of ADR and ADRL

> arm-wince-pe  +FAIL: ADR

> arm-wince-pe  +FAIL: ADRL

> arm-wince-pe  +FAIL: ARMv6-M

> arm-wince-pe  +FAIL: ARM Integer division instructions

> arm-wince-pe  +FAIL: Test automatic IT generation in Thumb-1 architectures.

> arm-wince-pe  +FAIL: ARM mode Thumb errors

> arm-wince-pe  +FAIL: Valid v7-A+IDIV

> arm-wince-pe  +FAIL: Valid v8-a+pan

> arm-wince-pe  +FAIL: Backslash-at for ARM

> arm-wince-pe  +FAIL: Deprecated swp{b} instructions

> arm-wince-pe  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM

> arm-wince-pe  +FAIL: El Segundo instructions

> arm-wince-pe  +FAIL: immediate expressions

> arm-wince-pe  +FAIL: modified immediate constants

> arm-wince-pe  +FAIL: Erratum 752419: Warn Loads with writebacks to SP

> arm-wince-pe  +FAIL: Unpredictable operations - ldr - arm

> arm-wince-pe  +FAIL: PC-relative LDR from global

> arm-wince-pe  +FAIL: Unpredictable operations - ldr - thumb

> arm-wince-pe  +FAIL: ldr - thumb

> arm-wince-pe  +FAIL: ldr - arm

> arm-wince-pe  +FAIL: Unpredictable LDRD and STRD instructions. - ARM

> arm-wince-pe  +FAIL: Accept lds<cc>sb mnemonics

> arm-wince-pe  +FAIL: Accept lds<cc>sh mnemonics

> arm-wince-pe  +FAIL: ARM load/store with pc base register

> arm-wince-pe  +FAIL: arm little-endian fpconst

> arm-wince-pe  +FAIL: ARM local label relocs to section symbol relocs (WinCE)

> arm-wince-pe  +FAIL: gas/arm/macro-pld

> arm-wince-pe  +FAIL: gas/arm/macro-vld1

> arm-wince-pe  +FAIL: Macro scrubbing

> arm-wince-pe  +FAIL: MRS/MSR test, architecture v6, ARM mode

> arm-wince-pe  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode

> arm-wince-pe  +FAIL: MRS/MSR test, architecture v7-A, ARM mode

> arm-wince-pe  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode

> arm-wince-pe  +FAIL: Overlapping multiplication operands for ARMv6

> arm-wince-pe  +FAIL: Overlapping multiplication operands without architecture specification

> arm-wince-pe  +FAIL: Disallow ARM instructions on V7M

> arm-wince-pe  +FAIL: MINUS ZERO OFFSET

> arm-wince-pe  +FAIL: OFFSET_IMM regression

> arm-wince-pe  +FAIL: PR18256 - Bad code triggers internal error

> arm-wince-pe  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction

> arm-wince-pe  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction

> arm-wince-pe  +FAIL: PUSH and POP

> arm-wince-pe  +FAIL: Invalid use of r15 errors

> arm-wince-pe  +FAIL: Case Sensitive Register Aliases

> arm-wince-pe  +FAIL: Branch relaxation with alignment.

> arm-wince-pe  +FAIL: Invalid relocations

> arm-wince-pe  +FAIL: pc used in instructions with register-shifted register

> arm-wince-pe  +FAIL: PR 12854: Extraneous shifts

> arm-wince-pe  +FAIL: SP and PC registers special uses test.

> arm-wince-pe  +FAIL: Invalid SP and PC operands test - ARM

> arm-wince-pe  +FAIL: SRS instruction in ARM mode

> arm-wince-pe  +FAIL: SRS instruction in Thumb-2 mode

> arm-wince-pe  +FAIL: STM and LDM

> arm-wince-pe  +FAIL: SWI/SVC instructions

> arm-wince-pe  +FAIL: ARM Thumb-compat pseudos

> arm-wince-pe  +FAIL: Thumb ARM-compat pseudos

> arm-wince-pe  +FAIL: Thumb NOP

> arm-wince-pe  +FAIL: Thumb-1 unified

> arm-wince-pe  +FAIL: gas/arm/thumb2_bcond

> arm-wince-pe  +FAIL: Invalid IT instructions

> arm-wince-pe  +FAIL: Invalid IT instructions

> arm-wince-pe  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2

> arm-wince-pe  +FAIL: Invalid UDF operands

> arm-wince-pe  +FAIL: Undefined local label error

> arm-wince-pe  +FAIL: Upredictable Instructions

> arm-wince-pe  +FAIL: macro test 1

> arm-wince-pe  +FAIL: macro test 2

> arm-wince-pe  +FAIL: macro test 3

> arm-wince-pe  +FAIL: macro irp

> arm-wince-pe  +FAIL: macro rept

> arm-wince-pe  +FAIL: nested irp/irpc/rept

> arm-wince-pe  +FAIL: macro vararg

> arm-wince-pe  +FAIL: macro infinite recursion

> arm-wince-pe  +FAIL: logical and in macro definition

> arm-wince-pe  +FAIL: semi

> arm-wince-pe  +FAIL: strings

> arm-wince-pe  +FAIL: APP with macro without NO_APP

> arm-wince-pe  +FAIL: APP with macro then NO_APP

> arm-wince-pe  +FAIL: APP with macro then NO_APP then more code

> arm-wince-pe  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file

> arm-wince-pe  +FAIL: macros badarg

> arm-wince-pe  +FAIL: macros dot

> arm-wince-pe  +FAIL: macros end

> arm-wince-pe  +FAIL: macros purge

> arm-wince-pe  +FAIL: macros redef

> arm-wince-pe  +FAIL: .exitm outside of a macro

> arm-wince-pe  +FAIL: aligned common A

> arm-wince-pe  +FAIL: aligned common B

> arm-wince-pe  +FAIL: aligned common C

> arm-wince-pe  +FAIL: aligned common D

> arm-wince-pe  +FAIL: section alignment

> arm-wince-pe  +FAIL: section alignment

> arm-wince-pe  +FAIL: section exclude

> arm-wince-pe  +FAIL: set directive in COFF

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed

> arm-wince-pe  +FAIL: --gc-sections -r without -e

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/secrel1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/exports.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/tlssec.s: assembly failed

> arm-wince-pe  +FAIL: PE-COFF --export-dynamic warning

> arm-wince-pe  +FAIL: PE-COFF Long section names (default)

> arm-wince-pe  +FAIL: PE-COFF Long section names (disabled)

> arm-wince-pe  +FAIL: PE-COFF Long section names (enabled)

> arm-wince-pe  +FAIL: PE-COFF Long section names in objects (default)

> arm-wince-pe  +FAIL: PE-COFF Long section names in objects (disabled)

> arm-wince-pe  +FAIL: PE-COFF Long section names in objects (enabled)

> arm-wince-pe  +FAIL: ld-pe/orphan

> arm-wince-pe  +FAIL: ld-pe/orphan_nu

> arm-wince-pe  +FAIL: ld-pe/pr19803

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/pr19803.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/non-c-lang-syms.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/alignof.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed

> arm-wince-pe  +FAIL: ld-scripts/data

> arm-wince-pe  +FAIL: ld-scripts/fill

> arm-wince-pe  +FAIL: ld-scripts/fill16

> arm-wince-pe  +FAIL: ld-scripts/default-script1

> arm-wince-pe  +FAIL: ld-scripts/default-script2

> arm-wince-pe  +FAIL: ld-scripts/default-script3

> arm-wince-pe  +FAIL: ld-scripts/default-script4

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed

> arm-wince-pe  +FAIL: ld-scripts/empty-address-1

> arm-wince-pe  +FAIL: ld-scripts/empty-address-2a

> arm-wince-pe  +FAIL: ld-scripts/empty-address-2b

> arm-wince-pe  +FAIL: ld-scripts/empty-address-3a

> arm-wince-pe  +FAIL: ld-scripts/empty-address-3b

> arm-wince-pe  +FAIL: ld-scripts/empty-address-3c

> arm-wince-pe  +FAIL: ld-scripts/expr1

> arm-wince-pe  +FAIL: ld-scripts/expr2

> arm-wince-pe  +FAIL: ld-scripts/sane1

> arm-wince-pe  +FAIL: ld-scripts/assign-loc

> arm-wince-pe  +FAIL: ld-scripts/pr14962

> arm-wince-pe  +FAIL: ld-scripts/pr14962-2

> arm-wince-pe  +FAIL: ld-scripts/pr22267

> arm-wince-pe  +FAIL: ld-scripts/pr18963

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed

> arm-wince-pe  +FAIL: include-1

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed

> arm-wince-pe  +FAIL: ld-scripts/provide-1

> arm-wince-pe  +FAIL: ld-scripts/provide-2

> arm-wince-pe  +FAIL: ld-scripts/provide-4

> arm-wince-pe  +FAIL: ld-scripts/provide-5

> arm-wince-pe  +FAIL: ld-scripts/provide-6

> arm-wince-pe  +FAIL: ld-scripts/provide-7

> arm-wince-pe  +FAIL: ld-scripts/provide-8

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed

> arm-wince-pe  +FAIL: ld-scripts/size-1

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed

> arm-wince-pe  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/weak1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-wince-pe  +FAIL: --entry foo archive

> arm-wince-pe  +FAIL: --entry foo -u foo archive

> arm-wince-pe  +FAIL: --entry foo

> arm-wince-pe  +FAIL: --entry foo -u foo

> arm-wince-pe  +FAIL: --entry 0x0

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-wince-pe  +FAIL: Check require-defined with an undefined symbol

> arm-wince-pe  +FAIL: Check require-defined can require a symbol from an object

> arm-wince-pe  +FAIL: Check require-defined does no error on a defined symbol

> arm-wince-pe  +FAIL: Check require-defined can require a symbol from an archive

> arm-wince-pe  +FAIL: Check require-defined can require two symbols

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/weak-undef.s: assembly failed

>

>

> --

> Alan Modra

> Australia Development Lab, IBM
Thomas Preudhomme March 2, 2018, 9:50 a.m. | #5
On it, will revert it if I can't find a fix today.

Best regards,

Thomas

On 01/03/18 23:26, Alan Modra wrote:
> On Thu, Mar 01, 2018 at 04:27:44PM +0000, Thomas Preudhomme wrote:

>> Hi Nick,

>>

>> Thank you for the approval and the quick review. I've noticed one more issue

>> in mark_feature_used which was referring to selected architecture but

>> testing cpu_variant (which only represents what is allowed). I've considered

>> this to be an obvious fix so have committed the patch with that comment fix.

> 

> I'm guessing the following is due to this patch.  ;-)

> 

> arm-nto  +FAIL: thumb2-cond (assembling)

> arm-nto  +FAIL: multiple input files

> arm-nto  +FAIL: skip rvct symbol

> arm-nto  +FAIL: nm (assembling)

> arm-nto  +FAIL: nm --size-sort (assembling)

> arm-nto  +ERROR: objdump can not recognize bintest.o

> arm-nto  +ERROR: objdump can not recognize bintest.o

> arm-nto  +FAIL: copy with setting section flags 2

> arm-nto  +FAIL: copy with setting section flags 3

> arm-nto  +FAIL: strip --strip-unneeded on common symbol

> arm-nto  +FAIL: --localize-hidden test 2

> arm-nto  +FAIL: objdump (assembling)

> arm-nto  +FAIL: size (assembling)

> arm-nto  +FAIL: pcrel values in assignment

> arm-nto  +FAIL: simplifiable double subtraction

> arm-nto  +FAIL: simplifiable double subtraction (-a)

> arm-nto  +FAIL: simple FP constants

> arm-nto  +FAIL: difference of two undefined symbols

> arm-nto  +FAIL: .equiv for symbol already set to another one

> arm-nto  +FAIL: .equiv for symbol already set to an expression

> arm-nto  +FAIL: .equ for symbol already set

> arm-nto  +FAIL: .equ for symbol already set through .eqv

> arm-nto  +FAIL: .eqv support

> arm-nto  +FAIL: .eqv for symbol already set

> arm-nto  +FAIL: == assignment support

> arm-nto  +FAIL: == assignment for symbol already set

> arm-nto  +FAIL: forward references

> arm-nto  +FAIL: forward expression

> arm-nto  +FAIL: .equ redefinitions

> arm-nto  +FAIL: .equ redefinitions (2)

> arm-nto  +FAIL: .equ redefinitions (3)

> arm-nto  +FAIL: .set for symbol already used as label

> arm-nto  +FAIL: .set for symbol already defined through .comm

> arm-nto  +FAIL: comment.s: comments in listings

> arm-nto  +FAIL: general info section in listings

> arm-nto  +FAIL: difference between forward references

> arm-nto  +FAIL: struct

> arm-nto  +FAIL: align

> arm-nto  +FAIL: align2

> arm-nto  +FAIL: alternate macro syntax

> arm-nto  +FAIL: conditional listings

> arm-nto  +FAIL: incbin

> arm-nto  +FAIL: assignment tests

> arm-nto  +FAIL: .sleb128 tests

> arm-nto  +FAIL: .sleb128 tests (2)

> arm-nto  +FAIL: .sleb128 tests (3)

> arm-nto  +FAIL: .sleb128 tests (4)

> arm-nto  +FAIL: .sleb128 tests (5)

> arm-nto  +FAIL: .sleb128 tests (7)

> arm-nto  +FAIL: .sleb128 tests (8)

> arm-nto  +FAIL: undefined symbols in sleb128 directive

> arm-nto  +FAIL: relax .uleb128

> arm-nto  +FAIL: .quad tests

> arm-nto  +FAIL: octa bignum

> arm-nto  +FAIL: weakref tests, relocations

> arm-nto  +FAIL: weakref tests, global syms

> arm-nto  +FAIL: weakref tests, local syms

> arm-nto  +FAIL: weakref tests, strong undefined syms

> arm-nto  +FAIL: weakref tests, weak undefined syms

> arm-nto  +FAIL: e: would close weakref loop: e => a => b => c => d => e

> arm-nto  +FAIL: a: would close weakref loop: a => b => c => d => e => a

> arm-nto  +FAIL: is already defined

> arm-nto  +FAIL: .strings tests

> arm-nto  +FAIL: quoted symbol names

> arm-nto  +FAIL: all pr20312

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 3)

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 4)

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 5)

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 6)

> arm-nto  +FAIL: gas/all/err-1.s  (test for errors, line 7)

> arm-nto  +FAIL: gas/all/err-1.s (test for excess errors)

> arm-nto  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)

> arm-nto  +FAIL: gas/all/err-fakelabel.s (test for excess errors)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)

> arm-nto  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)

> arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)

> arm-nto  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)

> arm-nto  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)

> arm-nto  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)

> arm-nto  +FAIL: gas/all/err-sizeof.s (test for excess errors)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for errors, line 4)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)

> arm-nto  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)

> arm-nto  +FAIL: gas/all/warn-1.s (test for excess errors)

> arm-nto  +FAIL: .org test 1

> arm-nto  +FAIL: .org test 2

> arm-nto  +FAIL: .org test 3

> arm-nto  +FAIL: .org test 4

> arm-nto  +FAIL: .org test 5

> arm-nto  +FAIL: .org test 6

> arm-nto  +FAIL: fill test with forward labels

> arm-nto  +FAIL: Two register form of data processing instruction with register shifted register operand

> arm-nto  +FAIL: ADDS relocations against local symbols for armv7-m

> arm-nto  +FAIL: ADDS relocations against local symbols for armv6s-m

> arm-nto  +FAIL: Invalid Immediate field for flag-setting add,sub

> arm-nto  +FAIL: Invalid use of ADR and ADRL

> arm-nto  +FAIL: ADR

> arm-nto  +FAIL: ADRL

> arm-nto  +FAIL: 64 Bytes alignment test

> arm-nto  +FAIL: ARMv6-M

> arm-nto  +FAIL: ARM Integer division instructions

> arm-nto  +FAIL: Test automatic IT generation in Thumb-1 architectures.

> arm-nto  +FAIL: ARM IT instruction

> arm-nto  +FAIL: ARM mode Thumb errors

> arm-nto  +FAIL: Valid v7-A+IDIV

> arm-nto  +FAIL: Valid v7e-m+fpv5-d16

> arm-nto  +FAIL: gas/arm/armv7e-m+fpv5-sp-d16

> arm-nto  +FAIL: Valid v8-a+cryptov1

> arm-nto  +FAIL: Valid v8-a+pan

> arm-nto  +FAIL: gas/arm/armv8a-automatic-hlt

> arm-nto  +FAIL: gas/arm/armv8a-automatic-lda

> arm-nto  +FAIL: gas/arm/attr-syntax

> arm-nto  +FAIL: gas/arm/automatic-bw

> arm-nto  +FAIL: gas/arm/automatic-cbz

> arm-nto  +FAIL: gas/arm/automatic-clrex

> arm-nto  +FAIL: gas/arm/automatic-lda

> arm-nto  +FAIL: gas/arm/automatic-ldaex

> arm-nto  +FAIL: gas/arm/automatic-ldaexb

> arm-nto  +FAIL: gas/arm/automatic-ldrex

> arm-nto  +FAIL: gas/arm/automatic-ldrexd

> arm-nto  +FAIL: gas/arm/automatic-movw

> arm-nto  +FAIL: gas/arm/automatic-sdiv

> arm-nto  +FAIL: gas/arm/automatic-strexb

> arm-nto  +FAIL: Backslash-at for ARM

> arm-nto  +FAIL: Bad barrier options (Thumb)

> arm-nto  +FAIL: Bad barrier options (ARM)

> arm-nto  +FAIL: bignums

> arm-nto  +FAIL: BLX encoding

> arm-nto  +FAIL: CSDB

> arm-nto  +FAIL: Deprecated swp{b} instructions

> arm-nto  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM

> arm-nto  +FAIL: Data disassembler test (no symbols)

> arm-nto  +FAIL: Data disassembler test (function symbol)

> arm-nto  +FAIL: Data disassembler test (with mapping symbol)

> arm-nto  +FAIL: gas/arm/eabi_attr_1

> arm-nto  +FAIL: El Segundo instructions

> arm-nto  +FAIL: Group relocation tests, encoding failures (alu)

> arm-nto  +FAIL: Group relocation tests, parsing failures (alu)

> arm-nto  +FAIL: Group relocation tests (alu)

> arm-nto  +FAIL: Group relocation tests, encoding failures (ldc)

> arm-nto  +FAIL: Group relocation tests, parsing failures (ldc)

> arm-nto  +FAIL: Group relocation tests (ldc)

> arm-nto  +FAIL: Group relocation tests, encoding failures (ldr)

> arm-nto  +FAIL: Group relocation tests, parsing failures (ldr)

> arm-nto  +FAIL: Group relocation tests (ldr)

> arm-nto  +FAIL: Group relocation tests, encoding failures (ldrs)

> arm-nto  +FAIL: Group relocation tests, parsing failures (ldrs)

> arm-nto  +FAIL: Group relocation tests (ldrs)

> arm-nto  +FAIL: immediate expressions

> arm-nto  +FAIL: modified immediate constants

> arm-nto  +FAIL: invalid instruction recovery test - ARM version

> arm-nto  +FAIL: invalid instruction recovery test - Thumb version

> arm-nto  +FAIL: .inst pseudo-opcode validations test

> arm-nto  +FAIL: .inst pseudo-opcode with automatic IT blocks test

> arm-nto  +FAIL: .inst pseudo-opcode test 1 - big endian version

> arm-nto  +FAIL: .inst pseudo-opcode test 1

> arm-nto  +FAIL: Erratum 752419: Warn Loads with writebacks to SP

> arm-nto  +FAIL: Unpredictable operations - ldr - arm

> arm-nto  +FAIL: PC-relative LDR from global

> arm-nto  +FAIL: Unpredictable operations - ldr - thumb

> arm-nto  +FAIL: ldr - thumb

> arm-nto  +FAIL: ldr - arm

> arm-nto  +FAIL: Unpredictable LDRD and STRD instructions. - ARM

> arm-nto  +FAIL: Accept lds<cc>sb mnemonics

> arm-nto  +FAIL: Accept lds<cc>sh mnemonics

> arm-nto  +FAIL: ARM load/store with 0 offset

> arm-nto  +FAIL: ARM load/store with pc base register

> arm-nto  +FAIL: Relocations against local function symbols

> arm-nto  +FAIL: ARM local label relocs to section symbol relocs (ELF)

> arm-nto  +FAIL: gas/arm/macro-pld

> arm-nto  +FAIL: gas/arm/macro-vld1

> arm-nto  +FAIL: Macro scrubbing

> arm-nto  +FAIL: ARM Mapping Symbols

> arm-nto  +FAIL: ARM Mapping Symbols Test 2

> arm-nto  +FAIL: ARM Mapping Symbols Test 3

> arm-nto  +FAIL: ARM Mapping Symbols Test 4

> arm-nto  +FAIL: ARM Mapping Symbols for .short (ELF version)

> arm-nto  +FAIL: MOVS relocations against local symbols for armv7-m

> arm-nto  +FAIL: MOVS relocations against local symbols for armv6s-m

> arm-nto  +FAIL: MOVW/MOVT relocations against local symbols

> arm-nto  +FAIL: MRS/MSR test, architecture v6, ARM mode

> arm-nto  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode

> arm-nto  +FAIL: MRS/MSR test, architecture v7-A, ARM mode

> arm-nto  +FAIL: MRS/MSR test, architecture v6t2, Thumb mode

> arm-nto  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode

> arm-nto  +FAIL: MRS/MSR test, architecture v7-M, Thumb mode

> arm-nto  +FAIL: MRS/MSR test, architecture v7e-M, Thumb mode

> arm-nto  +FAIL: Overlapping multiplication operands for ARMv6

> arm-nto  +FAIL: Overlapping multiplication operands without architecture specification

> arm-nto  +FAIL: Disallow ARM instructions on V7M

> arm-nto  +FAIL: ARM Mapping Symbols Ignored

> arm-nto  +FAIL: NOP<c> instructions

> arm-nto  +FAIL: MINUS ZERO OFFSET

> arm-nto  +FAIL: OFFSET_IMM regression

> arm-nto  +FAIL: PIC

> arm-nto  +FAIL: 26-bit teq/cmn/tst/cmp instructions

> arm-nto  +FAIL: Thumb branch to PLT

> arm-nto  +FAIL: PR18256 - Bad code triggers internal error

> arm-nto  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction

> arm-nto  +FAIL: ADR(L) for Thumb functions

> arm-nto  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction

> arm-nto  +FAIL: PR9722: Generation of Thumb NOP instruction

> arm-nto  +FAIL: PUSH and POP

> arm-nto  +FAIL: Invalid use of r15 errors

> arm-nto  +FAIL: Case Sensitive Register Aliases

> arm-nto  +FAIL: Branch relaxation with alignment.

> arm-nto  +FAIL: Invalid relocations

> arm-nto  +FAIL: pc used in instructions with register-shifted register

> arm-nto  +FAIL: PR 12854: Extraneous shifts

> arm-nto  +FAIL: SP and PC registers special uses test.

> arm-nto  +FAIL: Invalid SP and PC operands test - ARM

> arm-nto  +FAIL: SRS instruction in ARM mode

> arm-nto  +FAIL: SRS instruction in Thumb-2 mode

> arm-nto  +FAIL: STM and LDM

> arm-nto  +FAIL: STREXH/STREXB. - Thumb

> arm-nto  +FAIL: SWI/SVC instructions

> arm-nto  +FAIL: Thumb-2 branch to constant address

> arm-nto  +FAIL: TARGET reloc

> arm-nto  +FAIL: ARM Thumb-compat pseudos

> arm-nto  +FAIL: Thumb ARM-compat pseudos

> arm-nto  +FAIL: Out of range Thumb branches (PR 12848)

> arm-nto  +FAIL: Thumb NOP

> arm-nto  +FAIL: Wide instruction rejected in non-Thumb2 cores.

> arm-nto  +FAIL: Wide instruction acceptance in Thumb-2 cores

> arm-nto  +FAIL: Thumb-1 unified

> arm-nto  +FAIL: gas/arm/thumb2_bcond

> arm-nto  +FAIL: Invalid IT instructions

> arm-nto  +FAIL: Invalid IT instructions

> arm-nto  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2

> arm-nto  +FAIL: gas/arm/thumbver

> arm-nto  +FAIL: TLS

> arm-nto  +FAIL: Invalid UDF operands

> arm-nto  +FAIL: Undefined local label error

> arm-nto  +FAIL: Upredictable Instructions

> arm-nto  +FAIL: Unwind table generation

> arm-nto  +FAIL: gas/arm/v4bx

> arm-nto  +FAIL: VCMP immediate without prefix

> arm-nto  +FAIL: Thumb branch to weak

> arm-nto  +FAIL: adr of weak

> arm-nto  +FAIL: macro test 1

> arm-nto  +FAIL: macro test 2

> arm-nto  +FAIL: macro test 3

> arm-nto  +FAIL: macro irp

> arm-nto  +FAIL: macro rept

> arm-nto  +FAIL: nested irp/irpc/rept

> arm-nto  +FAIL: macro vararg

> arm-nto  +FAIL: macro infinite recursion

> arm-nto  +FAIL: logical and in macro definition

> arm-nto  +FAIL: semi

> arm-nto  +FAIL: strings

> arm-nto  +FAIL: APP with macro without NO_APP

> arm-nto  +FAIL: APP with macro then NO_APP

> arm-nto  +FAIL: APP with macro then NO_APP then more code

> arm-nto  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file

> arm-nto  +FAIL: macros badarg

> arm-nto  +FAIL: macros dot

> arm-nto  +FAIL: macros end

> arm-nto  +FAIL: macros purge

> arm-nto  +FAIL: macros redef

> arm-nto  +FAIL: .exitm outside of a macro

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed

> arm-nto  +FAIL: --gc-sections -r without -e

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed

> arm-nto  +FAIL: ld-scripts/data

> arm-nto  +FAIL: ld-scripts/fill

> arm-nto  +FAIL: ld-scripts/fill16

> arm-nto  +FAIL: ld-scripts/default-script1

> arm-nto  +FAIL: ld-scripts/default-script2

> arm-nto  +FAIL: ld-scripts/default-script3

> arm-nto  +FAIL: ld-scripts/default-script4

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed

> arm-nto  +FAIL: ld-scripts/empty-address-1

> arm-nto  +FAIL: ld-scripts/empty-address-2a

> arm-nto  +FAIL: ld-scripts/empty-address-2b

> arm-nto  +FAIL: ld-scripts/empty-address-3a

> arm-nto  +FAIL: ld-scripts/empty-address-3b

> arm-nto  +FAIL: ld-scripts/empty-address-3c

> arm-nto  +FAIL: ld-scripts/expr1

> arm-nto  +FAIL: ld-scripts/expr2

> arm-nto  +FAIL: ld-scripts/sane1

> arm-nto  +FAIL: ld-scripts/assign-loc

> arm-nto  +FAIL: ld-scripts/pr14962

> arm-nto  +FAIL: ld-scripts/pr14962-2

> arm-nto  +FAIL: ld-scripts/pr22267

> arm-nto  +FAIL: ld-scripts/pr18963

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed

> arm-nto  +FAIL: include-1

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed

> arm-nto  +FAIL: ld-scripts/provide-1

> arm-nto  +FAIL: ld-scripts/provide-2

> arm-nto  +FAIL: ld-scripts/provide-4

> arm-nto  +FAIL: ld-scripts/provide-5

> arm-nto  +FAIL: ld-scripts/provide-6

> arm-nto  +FAIL: ld-scripts/provide-7

> arm-nto  +FAIL: ld-scripts/provide-8

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed

> arm-nto  +FAIL: ld-scripts/section-match-1

> arm-nto  +FAIL: ld-scripts/size-1

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-nto  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed

> arm-nto  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-nto  +FAIL: --entry foo archive

> arm-nto  +FAIL: --entry foo -u foo archive

> arm-nto  +FAIL: --entry foo

> arm-nto  +FAIL: --entry foo -u foo

> arm-nto  +FAIL: --entry 0x0

> arm-nto  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-nto  +FAIL: Check require-defined with an undefined symbol

> arm-nto  +FAIL: Check require-defined can require a symbol from an object

> arm-nto  +FAIL: Check require-defined does no error on a defined symbol

> arm-nto  +FAIL: Check require-defined can require a symbol from an archive

> arm-nto  +FAIL: Check require-defined can require two symbols

> arm-pe  +FAIL: thumb2-cond (assembling)

> arm-pe  +FAIL: multiple input files

> arm-pe  +FAIL: skip rvct symbol

> arm-pe  +FAIL: dlltool (version.dll)

> arm-pe  +FAIL: dlltool -p (execution)

> arm-pe  +FAIL: nm (assembling)

> arm-pe  +FAIL: nm --size-sort (assembling)

> arm-pe  +ERROR: objdump can not recognize bintest.o

> arm-pe  +ERROR: objdump can not recognize bintest.o

> arm-pe  +FAIL: copy with setting section flags 2

> arm-pe  +FAIL: strip --strip-unneeded on common symbol

> arm-pe  +FAIL: --localize-hidden test 2

> arm-pe  +FAIL: objdump (assembling)

> arm-pe  +FAIL: size (assembling)

> arm-pe  +FAIL: pcrel values in assignment

> arm-pe  +FAIL: simplifiable double subtraction

> arm-pe  +FAIL: simplifiable double subtraction (-a)

> arm-pe  +FAIL: simple FP constants

> arm-pe  +FAIL: difference of two undefined symbols

> arm-pe  +FAIL: .equiv for symbol already set to another one

> arm-pe  +FAIL: .equiv for symbol already set to an expression

> arm-pe  +FAIL: .equ for symbol already set

> arm-pe  +FAIL: .equ for symbol already set through .eqv

> arm-pe  +FAIL: .eqv support

> arm-pe  +FAIL: .eqv for symbol already set

> arm-pe  +FAIL: == assignment support

> arm-pe  +FAIL: == assignment for symbol already set

> arm-pe  +FAIL: forward references

> arm-pe  +FAIL: forward expression

> arm-pe  +FAIL: .equ redefinitions

> arm-pe  +FAIL: .equ redefinitions (3)

> arm-pe  +FAIL: .set for symbol already used as label

> arm-pe  +FAIL: .set for symbol already defined through .comm

> arm-pe  +FAIL: comment.s: comments in listings

> arm-pe  +FAIL: general info section in listings

> arm-pe  +FAIL: difference between forward references

> arm-pe  +FAIL: struct

> arm-pe  +FAIL: align

> arm-pe  +FAIL: align2

> arm-pe  +FAIL: alternate macro syntax

> arm-pe  +FAIL: conditional listings

> arm-pe  +FAIL: incbin

> arm-pe  +FAIL: assignment tests

> arm-pe  +FAIL: .sleb128 tests

> arm-pe  +FAIL: .sleb128 tests (2)

> arm-pe  +FAIL: .sleb128 tests (3)

> arm-pe  +FAIL: .sleb128 tests (4)

> arm-pe  +FAIL: .sleb128 tests (5)

> arm-pe  +FAIL: .sleb128 tests (7)

> arm-pe  +FAIL: .sleb128 tests (8)

> arm-pe  +FAIL: undefined symbols in sleb128 directive

> arm-pe  +FAIL: relax .uleb128

> arm-pe  +FAIL: .quad tests

> arm-pe  +FAIL: octa bignum

> arm-pe  +FAIL: weakref tests, relocations

> arm-pe  +FAIL: weakref tests, global syms

> arm-pe  +FAIL: weakref tests, local syms

> arm-pe  +FAIL: weakref tests, strong undefined syms

> arm-pe  +FAIL: weakref tests, weak undefined syms

> arm-pe  +FAIL: e: would close weakref loop: e => a => b => c => d => e

> arm-pe  +FAIL: a: would close weakref loop: a => b => c => d => e => a

> arm-pe  +FAIL: is already defined

> arm-pe  +FAIL: .strings tests

> arm-pe  +FAIL: quoted symbol names

> arm-pe  +FAIL: all pr20312

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 3)

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 4)

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 5)

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 6)

> arm-pe  +FAIL: gas/all/err-1.s  (test for errors, line 7)

> arm-pe  +FAIL: gas/all/err-1.s (test for excess errors)

> arm-pe  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)

> arm-pe  +FAIL: gas/all/err-fakelabel.s (test for excess errors)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)

> arm-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)

> arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)

> arm-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)

> arm-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)

> arm-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)

> arm-pe  +FAIL: gas/all/err-sizeof.s (test for excess errors)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for errors, line 4)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)

> arm-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)

> arm-pe  +FAIL: gas/all/warn-1.s (test for excess errors)

> arm-pe  +FAIL: .org test 1

> arm-pe  +FAIL: .org test 2

> arm-pe  +FAIL: .org test 3

> arm-pe  +FAIL: .org test 4

> arm-pe  +FAIL: .org test 5

> arm-pe  +FAIL: .org test 6

> arm-pe  +FAIL: fill test with forward labels

> arm-pe  +FAIL: Two register form of data processing instruction with register shifted register operand

> arm-pe  +FAIL: Invalid use of ADR and ADRL

> arm-pe  +FAIL: ADR

> arm-pe  +FAIL: ADRL

> arm-pe  +FAIL: ARMv6-M

> arm-pe  +FAIL: ARM Integer division instructions

> arm-pe  +FAIL: Test automatic IT generation in Thumb-1 architectures.

> arm-pe  +FAIL: ARM mode Thumb errors

> arm-pe  +FAIL: Valid v7-A+IDIV

> arm-pe  +FAIL: Valid v8-a+pan

> arm-pe  +FAIL: Backslash-at for ARM

> arm-pe  +FAIL: Deprecated swp{b} instructions

> arm-pe  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM

> arm-pe  +FAIL: El Segundo instructions

> arm-pe  +FAIL: immediate expressions

> arm-pe  +FAIL: modified immediate constants

> arm-pe  +FAIL: Erratum 752419: Warn Loads with writebacks to SP

> arm-pe  +FAIL: Unpredictable operations - ldr - arm

> arm-pe  +FAIL: PC-relative LDR from global

> arm-pe  +FAIL: Unpredictable operations - ldr - thumb

> arm-pe  +FAIL: ldr - thumb

> arm-pe  +FAIL: ldr - arm

> arm-pe  +FAIL: Unpredictable LDRD and STRD instructions. - ARM

> arm-pe  +FAIL: Accept lds<cc>sb mnemonics

> arm-pe  +FAIL: Accept lds<cc>sh mnemonics

> arm-pe  +FAIL: ARM load/store with pc base register

> arm-pe  +FAIL: arm little-endian fpconst

> arm-pe  +FAIL: ARM local label relocs to section symbol relocs (COFF)

> arm-pe  +FAIL: gas/arm/macro-pld

> arm-pe  +FAIL: gas/arm/macro-vld1

> arm-pe  +FAIL: Macro scrubbing

> arm-pe  +FAIL: MRS/MSR test, architecture v6, ARM mode

> arm-pe  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode

> arm-pe  +FAIL: MRS/MSR test, architecture v7-A, ARM mode

> arm-pe  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode

> arm-pe  +FAIL: Overlapping multiplication operands for ARMv6

> arm-pe  +FAIL: Overlapping multiplication operands without architecture specification

> arm-pe  +FAIL: Disallow ARM instructions on V7M

> arm-pe  +FAIL: MINUS ZERO OFFSET

> arm-pe  +FAIL: OFFSET_IMM regression

> arm-pe  +FAIL: PR18256 - Bad code triggers internal error

> arm-pe  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction

> arm-pe  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction

> arm-pe  +FAIL: PUSH and POP

> arm-pe  +FAIL: Invalid use of r15 errors

> arm-pe  +FAIL: Case Sensitive Register Aliases

> arm-pe  +FAIL: Branch relaxation with alignment.

> arm-pe  +FAIL: Invalid relocations

> arm-pe  +FAIL: pc used in instructions with register-shifted register

> arm-pe  +FAIL: PR 12854: Extraneous shifts

> arm-pe  +FAIL: SP and PC registers special uses test.

> arm-pe  +FAIL: Invalid SP and PC operands test - ARM

> arm-pe  +FAIL: SRS instruction in ARM mode

> arm-pe  +FAIL: SRS instruction in Thumb-2 mode

> arm-pe  +FAIL: STM and LDM

> arm-pe  +FAIL: SWI/SVC instructions

> arm-pe  +FAIL: ARM Thumb-compat pseudos

> arm-pe  +FAIL: Thumb ARM-compat pseudos

> arm-pe  +FAIL: Thumb NOP

> arm-pe  +FAIL: Thumb-1 unified

> arm-pe  +FAIL: gas/arm/thumb2_bcond

> arm-pe  +FAIL: Invalid IT instructions

> arm-pe  +FAIL: Invalid IT instructions

> arm-pe  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2

> arm-pe  +FAIL: Invalid UDF operands

> arm-pe  +FAIL: Undefined local label error

> arm-pe  +FAIL: Upredictable Instructions

> arm-pe  +FAIL: macro test 1

> arm-pe  +FAIL: macro test 2

> arm-pe  +FAIL: macro test 3

> arm-pe  +FAIL: macro irp

> arm-pe  +FAIL: macro rept

> arm-pe  +FAIL: nested irp/irpc/rept

> arm-pe  +FAIL: macro vararg

> arm-pe  +FAIL: macro infinite recursion

> arm-pe  +FAIL: logical and in macro definition

> arm-pe  +FAIL: semi

> arm-pe  +FAIL: strings

> arm-pe  +FAIL: APP with macro without NO_APP

> arm-pe  +FAIL: APP with macro then NO_APP

> arm-pe  +FAIL: APP with macro then NO_APP then more code

> arm-pe  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file

> arm-pe  +FAIL: macros badarg

> arm-pe  +FAIL: macros dot

> arm-pe  +FAIL: macros end

> arm-pe  +FAIL: macros purge

> arm-pe  +FAIL: macros redef

> arm-pe  +FAIL: .exitm outside of a macro

> arm-pe  +FAIL: aligned common A

> arm-pe  +FAIL: aligned common B

> arm-pe  +FAIL: aligned common C

> arm-pe  +FAIL: aligned common D

> arm-pe  +FAIL: section alignment

> arm-pe  +FAIL: section alignment

> arm-pe  +FAIL: section exclude

> arm-pe  +FAIL: set directive in COFF

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed

> arm-pe  +FAIL: --gc-sections -r without -e

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed

> arm-pe  +FAIL: PE-COFF --export-dynamic warning

> arm-pe  +FAIL: PE-COFF Long section names (default)

> arm-pe  +FAIL: PE-COFF Long section names (disabled)

> arm-pe  +FAIL: PE-COFF Long section names (enabled)

> arm-pe  +FAIL: PE-COFF Long section names in objects (default)

> arm-pe  +FAIL: PE-COFF Long section names in objects (disabled)

> arm-pe  +FAIL: PE-COFF Long section names in objects (enabled)

> arm-pe  +FAIL: ld-pe/orphan

> arm-pe  +FAIL: ld-pe/orphan_nu

> arm-pe  +FAIL: ld-pe/pr19803

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/pr19803.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/non-c-lang-syms.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/alignof.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed

> arm-pe  +FAIL: ld-scripts/data

> arm-pe  +FAIL: ld-scripts/fill

> arm-pe  +FAIL: ld-scripts/fill16

> arm-pe  +FAIL: ld-scripts/default-script1

> arm-pe  +FAIL: ld-scripts/default-script2

> arm-pe  +FAIL: ld-scripts/default-script3

> arm-pe  +FAIL: ld-scripts/default-script4

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed

> arm-pe  +FAIL: ld-scripts/empty-address-1

> arm-pe  +FAIL: ld-scripts/empty-address-2a

> arm-pe  +FAIL: ld-scripts/empty-address-2b

> arm-pe  +FAIL: ld-scripts/empty-address-3a

> arm-pe  +FAIL: ld-scripts/empty-address-3b

> arm-pe  +FAIL: ld-scripts/empty-address-3c

> arm-pe  +FAIL: ld-scripts/expr1

> arm-pe  +FAIL: ld-scripts/expr2

> arm-pe  +FAIL: ld-scripts/sane1

> arm-pe  +FAIL: ld-scripts/assign-loc

> arm-pe  +FAIL: ld-scripts/pr14962

> arm-pe  +FAIL: ld-scripts/pr14962-2

> arm-pe  +FAIL: ld-scripts/pr22267

> arm-pe  +FAIL: ld-scripts/pr18963

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed

> arm-pe  +FAIL: include-1

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed

> arm-pe  +FAIL: ld-scripts/provide-1

> arm-pe  +FAIL: ld-scripts/provide-2

> arm-pe  +FAIL: ld-scripts/provide-4

> arm-pe  +FAIL: ld-scripts/provide-5

> arm-pe  +FAIL: ld-scripts/provide-6

> arm-pe  +FAIL: ld-scripts/provide-7

> arm-pe  +FAIL: ld-scripts/provide-8

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed

> arm-pe  +FAIL: ld-scripts/size-1

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed

> arm-pe  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/weak1.s: assembly failed

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-pe  +FAIL: --entry foo archive

> arm-pe  +FAIL: --entry foo -u foo archive

> arm-pe  +FAIL: --entry foo

> arm-pe  +FAIL: --entry foo -u foo

> arm-pe  +FAIL: --entry 0x0

> arm-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-pe  +FAIL: Check require-defined with an undefined symbol

> arm-pe  +FAIL: Check require-defined can require a symbol from an object

> arm-pe  +FAIL: Check require-defined does no error on a defined symbol

> arm-pe  +FAIL: Check require-defined can require a symbol from an archive

> arm-pe  +FAIL: Check require-defined can require two symbols

> arm-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/weak-undef.s: assembly failed

> arm-wince-pe  +FAIL: thumb2-cond (assembling)

> arm-wince-pe  +FAIL: multiple input files

> arm-wince-pe  +FAIL: skip rvct symbol

> arm-wince-pe  +FAIL: dlltool (version.dll)

> arm-wince-pe  +FAIL: dlltool -p (execution)

> arm-wince-pe  +FAIL: nm (assembling)

> arm-wince-pe  +FAIL: nm --size-sort (assembling)

> arm-wince-pe  +ERROR: objdump can not recognize bintest.o

> arm-wince-pe  +ERROR: objdump can not recognize bintest.o

> arm-wince-pe  +FAIL: copy with setting section flags 2

> arm-wince-pe  +FAIL: strip --strip-unneeded on common symbol

> arm-wince-pe  +FAIL: --localize-hidden test 2

> arm-wince-pe  +FAIL: objdump (assembling)

> arm-wince-pe  +FAIL: size (assembling)

> arm-wince-pe  +FAIL: pcrel values in assignment

> arm-wince-pe  +FAIL: simplifiable double subtraction

> arm-wince-pe  +FAIL: simplifiable double subtraction (-a)

> arm-wince-pe  +FAIL: simple FP constants

> arm-wince-pe  +FAIL: difference of two undefined symbols

> arm-wince-pe  +FAIL: .equiv for symbol already set to another one

> arm-wince-pe  +FAIL: .equiv for symbol already set to an expression

> arm-wince-pe  +FAIL: .equ for symbol already set

> arm-wince-pe  +FAIL: .equ for symbol already set through .eqv

> arm-wince-pe  +FAIL: .eqv support

> arm-wince-pe  +FAIL: .eqv for symbol already set

> arm-wince-pe  +FAIL: == assignment support

> arm-wince-pe  +FAIL: == assignment for symbol already set

> arm-wince-pe  +FAIL: forward references

> arm-wince-pe  +FAIL: forward expression

> arm-wince-pe  +FAIL: .equ redefinitions

> arm-wince-pe  +FAIL: .equ redefinitions (2)

> arm-wince-pe  +FAIL: .equ redefinitions (3)

> arm-wince-pe  +FAIL: .set for symbol already used as label

> arm-wince-pe  +FAIL: .set for symbol already defined through .comm

> arm-wince-pe  +FAIL: comment.s: comments in listings

> arm-wince-pe  +FAIL: general info section in listings

> arm-wince-pe  +FAIL: difference between forward references

> arm-wince-pe  +FAIL: struct

> arm-wince-pe  +FAIL: align

> arm-wince-pe  +FAIL: align2

> arm-wince-pe  +FAIL: alternate macro syntax

> arm-wince-pe  +FAIL: conditional listings

> arm-wince-pe  +FAIL: incbin

> arm-wince-pe  +FAIL: assignment tests

> arm-wince-pe  +FAIL: .sleb128 tests

> arm-wince-pe  +FAIL: .sleb128 tests (2)

> arm-wince-pe  +FAIL: .sleb128 tests (3)

> arm-wince-pe  +FAIL: .sleb128 tests (4)

> arm-wince-pe  +FAIL: .sleb128 tests (5)

> arm-wince-pe  +FAIL: .sleb128 tests (7)

> arm-wince-pe  +FAIL: .sleb128 tests (8)

> arm-wince-pe  +FAIL: undefined symbols in sleb128 directive

> arm-wince-pe  +FAIL: relax .uleb128

> arm-wince-pe  +FAIL: .quad tests

> arm-wince-pe  +FAIL: octa bignum

> arm-wince-pe  +FAIL: weakref tests, relocations

> arm-wince-pe  +FAIL: weakref tests, global syms

> arm-wince-pe  +FAIL: weakref tests, local syms

> arm-wince-pe  +FAIL: weakref tests, strong undefined syms

> arm-wince-pe  +FAIL: weakref tests, weak undefined syms

> arm-wince-pe  +FAIL: e: would close weakref loop: e => a => b => c => d => e

> arm-wince-pe  +FAIL: a: would close weakref loop: a => b => c => d => e => a

> arm-wince-pe  +FAIL: is already defined

> arm-wince-pe  +FAIL: .strings tests

> arm-wince-pe  +FAIL: quoted symbol names

> arm-wince-pe  +FAIL: all pr20312

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 3)

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 4)

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 5)

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 6)

> arm-wince-pe  +FAIL: gas/all/err-1.s  (test for errors, line 7)

> arm-wince-pe  +FAIL: gas/all/err-1.s (test for excess errors)

> arm-wince-pe  +FAIL: gas/all/err-fakelabel.s  (test for errors, line 3)

> arm-wince-pe  +FAIL: gas/all/err-fakelabel.s (test for excess errors)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 4)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 5)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 6)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 9)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 10)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s  (test for errors, line 3)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 4)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 5)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s junk (test for errors, line 6)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 9)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s missing (test for warnings, line 10)

> arm-wince-pe  +FAIL: gas/all/err-sizeof.s (test for excess errors)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 3)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for errors, line 4)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 5)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 6)

> arm-wince-pe  +FAIL: gas/all/warn-1.s  (test for warnings, line 7)

> arm-wince-pe  +FAIL: gas/all/warn-1.s (test for excess errors)

> arm-wince-pe  +FAIL: .org test 1

> arm-wince-pe  +FAIL: .org test 2

> arm-wince-pe  +FAIL: .org test 3

> arm-wince-pe  +FAIL: .org test 4

> arm-wince-pe  +FAIL: .org test 5

> arm-wince-pe  +FAIL: .org test 6

> arm-wince-pe  +FAIL: fill test with forward labels

> arm-wince-pe  +FAIL: Two register form of data processing instruction with register shifted register operand

> arm-wince-pe  +FAIL: Invalid use of ADR and ADRL

> arm-wince-pe  +FAIL: ADR

> arm-wince-pe  +FAIL: ADRL

> arm-wince-pe  +FAIL: ARMv6-M

> arm-wince-pe  +FAIL: ARM Integer division instructions

> arm-wince-pe  +FAIL: Test automatic IT generation in Thumb-1 architectures.

> arm-wince-pe  +FAIL: ARM mode Thumb errors

> arm-wince-pe  +FAIL: Valid v7-A+IDIV

> arm-wince-pe  +FAIL: Valid v8-a+pan

> arm-wince-pe  +FAIL: Backslash-at for ARM

> arm-wince-pe  +FAIL: Deprecated swp{b} instructions

> arm-wince-pe  +FAIL: Unpredictable MRRC and MRRC2 instructions. - ARM

> arm-wince-pe  +FAIL: El Segundo instructions

> arm-wince-pe  +FAIL: immediate expressions

> arm-wince-pe  +FAIL: modified immediate constants

> arm-wince-pe  +FAIL: Erratum 752419: Warn Loads with writebacks to SP

> arm-wince-pe  +FAIL: Unpredictable operations - ldr - arm

> arm-wince-pe  +FAIL: PC-relative LDR from global

> arm-wince-pe  +FAIL: Unpredictable operations - ldr - thumb

> arm-wince-pe  +FAIL: ldr - thumb

> arm-wince-pe  +FAIL: ldr - arm

> arm-wince-pe  +FAIL: Unpredictable LDRD and STRD instructions. - ARM

> arm-wince-pe  +FAIL: Accept lds<cc>sb mnemonics

> arm-wince-pe  +FAIL: Accept lds<cc>sh mnemonics

> arm-wince-pe  +FAIL: ARM load/store with pc base register

> arm-wince-pe  +FAIL: arm little-endian fpconst

> arm-wince-pe  +FAIL: ARM local label relocs to section symbol relocs (WinCE)

> arm-wince-pe  +FAIL: gas/arm/macro-pld

> arm-wince-pe  +FAIL: gas/arm/macro-vld1

> arm-wince-pe  +FAIL: Macro scrubbing

> arm-wince-pe  +FAIL: MRS/MSR test, architecture v6, ARM mode

> arm-wince-pe  +FAIL: MRS/MSR negative test, architecture v7-A, ARM mode

> arm-wince-pe  +FAIL: MRS/MSR test, architecture v7-A, ARM mode

> arm-wince-pe  +FAIL: MRS/MSR negative test, architecture v7-M, Thumb mode

> arm-wince-pe  +FAIL: Overlapping multiplication operands for ARMv6

> arm-wince-pe  +FAIL: Overlapping multiplication operands without architecture specification

> arm-wince-pe  +FAIL: Disallow ARM instructions on V7M

> arm-wince-pe  +FAIL: MINUS ZERO OFFSET

> arm-wince-pe  +FAIL: OFFSET_IMM regression

> arm-wince-pe  +FAIL: PR18256 - Bad code triggers internal error

> arm-wince-pe  +FAIL: PR18347 - GAS silently ignores a misconstructed LDR instruction

> arm-wince-pe  +FAIL: PR 22773: Invalid immediate constants produce incorrect instruction

> arm-wince-pe  +FAIL: PUSH and POP

> arm-wince-pe  +FAIL: Invalid use of r15 errors

> arm-wince-pe  +FAIL: Case Sensitive Register Aliases

> arm-wince-pe  +FAIL: Branch relaxation with alignment.

> arm-wince-pe  +FAIL: Invalid relocations

> arm-wince-pe  +FAIL: pc used in instructions with register-shifted register

> arm-wince-pe  +FAIL: PR 12854: Extraneous shifts

> arm-wince-pe  +FAIL: SP and PC registers special uses test.

> arm-wince-pe  +FAIL: Invalid SP and PC operands test - ARM

> arm-wince-pe  +FAIL: SRS instruction in ARM mode

> arm-wince-pe  +FAIL: SRS instruction in Thumb-2 mode

> arm-wince-pe  +FAIL: STM and LDM

> arm-wince-pe  +FAIL: SWI/SVC instructions

> arm-wince-pe  +FAIL: ARM Thumb-compat pseudos

> arm-wince-pe  +FAIL: Thumb ARM-compat pseudos

> arm-wince-pe  +FAIL: Thumb NOP

> arm-wince-pe  +FAIL: Thumb-1 unified

> arm-wince-pe  +FAIL: gas/arm/thumb2_bcond

> arm-wince-pe  +FAIL: Invalid IT instructions

> arm-wince-pe  +FAIL: Invalid IT instructions

> arm-wince-pe  +FAIL: Unpredictable LDRD and STRD instructions. - Thumb-2

> arm-wince-pe  +FAIL: Invalid UDF operands

> arm-wince-pe  +FAIL: Undefined local label error

> arm-wince-pe  +FAIL: Upredictable Instructions

> arm-wince-pe  +FAIL: macro test 1

> arm-wince-pe  +FAIL: macro test 2

> arm-wince-pe  +FAIL: macro test 3

> arm-wince-pe  +FAIL: macro irp

> arm-wince-pe  +FAIL: macro rept

> arm-wince-pe  +FAIL: nested irp/irpc/rept

> arm-wince-pe  +FAIL: macro vararg

> arm-wince-pe  +FAIL: macro infinite recursion

> arm-wince-pe  +FAIL: logical and in macro definition

> arm-wince-pe  +FAIL: semi

> arm-wince-pe  +FAIL: strings

> arm-wince-pe  +FAIL: APP with macro without NO_APP

> arm-wince-pe  +FAIL: APP with macro then NO_APP

> arm-wince-pe  +FAIL: APP with macro then NO_APP then more code

> arm-wince-pe  +FAIL: included file with .if 0 wrapped in APP/NO_APP, no final NO_APP, macro in main file

> arm-wince-pe  +FAIL: macros badarg

> arm-wince-pe  +FAIL: macros dot

> arm-wince-pe  +FAIL: macros end

> arm-wince-pe  +FAIL: macros purge

> arm-wince-pe  +FAIL: macros redef

> arm-wince-pe  +FAIL: .exitm outside of a macro

> arm-wince-pe  +FAIL: aligned common A

> arm-wince-pe  +FAIL: aligned common B

> arm-wince-pe  +FAIL: aligned common C

> arm-wince-pe  +FAIL: aligned common D

> arm-wince-pe  +FAIL: section alignment

> arm-wince-pe  +FAIL: section alignment

> arm-wince-pe  +FAIL: section exclude

> arm-wince-pe  +FAIL: set directive in COFF

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-checks/asm.s: assembly failed

> arm-wince-pe  +FAIL: --gc-sections -r without -e

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-libs/lib-2.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-misc/start.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/secrel1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/exports.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/tlssec.s: assembly failed

> arm-wince-pe  +FAIL: PE-COFF --export-dynamic warning

> arm-wince-pe  +FAIL: PE-COFF Long section names (default)

> arm-wince-pe  +FAIL: PE-COFF Long section names (disabled)

> arm-wince-pe  +FAIL: PE-COFF Long section names (enabled)

> arm-wince-pe  +FAIL: PE-COFF Long section names in objects (default)

> arm-wince-pe  +FAIL: PE-COFF Long section names in objects (disabled)

> arm-wince-pe  +FAIL: PE-COFF Long section names in objects (enabled)

> arm-wince-pe  +FAIL: ld-pe/orphan

> arm-wince-pe  +FAIL: ld-pe/orphan_nu

> arm-wince-pe  +FAIL: ld-pe/pr19803

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/pr19803.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-pe/non-c-lang-syms.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/align.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/alignof.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/assert.s: assembly failed

> arm-wince-pe  +FAIL: ld-scripts/data

> arm-wince-pe  +FAIL: ld-scripts/fill

> arm-wince-pe  +FAIL: ld-scripts/fill16

> arm-wince-pe  +FAIL: ld-scripts/default-script1

> arm-wince-pe  +FAIL: ld-scripts/default-script2

> arm-wince-pe  +FAIL: ld-scripts/default-script3

> arm-wince-pe  +FAIL: ld-scripts/default-script4

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/defined.s: assembly failed

> arm-wince-pe  +FAIL: ld-scripts/empty-address-1

> arm-wince-pe  +FAIL: ld-scripts/empty-address-2a

> arm-wince-pe  +FAIL: ld-scripts/empty-address-2b

> arm-wince-pe  +FAIL: ld-scripts/empty-address-3a

> arm-wince-pe  +FAIL: ld-scripts/empty-address-3b

> arm-wince-pe  +FAIL: ld-scripts/empty-address-3c

> arm-wince-pe  +FAIL: ld-scripts/expr1

> arm-wince-pe  +FAIL: ld-scripts/expr2

> arm-wince-pe  +FAIL: ld-scripts/sane1

> arm-wince-pe  +FAIL: ld-scripts/assign-loc

> arm-wince-pe  +FAIL: ld-scripts/pr14962

> arm-wince-pe  +FAIL: ld-scripts/pr14962-2

> arm-wince-pe  +FAIL: ld-scripts/pr22267

> arm-wince-pe  +FAIL: ld-scripts/pr18963

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/extern.s: assembly failed

> arm-wince-pe  +FAIL: include-1

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/log2.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/print-memory-usage-3.s: assembly failed

> arm-wince-pe  +FAIL: ld-scripts/provide-1

> arm-wince-pe  +FAIL: ld-scripts/provide-2

> arm-wince-pe  +FAIL: ld-scripts/provide-4

> arm-wince-pe  +FAIL: ld-scripts/provide-5

> arm-wince-pe  +FAIL: ld-scripts/provide-6

> arm-wince-pe  +FAIL: ld-scripts/provide-7

> arm-wince-pe  +FAIL: ld-scripts/provide-8

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/script.s: assembly failed

> arm-wince-pe  +FAIL: ld-scripts/size-1

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/sizeof.s: assembly failed

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/pr14962a.s: assembly failed

> arm-wince-pe  +ERROR: Error assembling a trivial file for sysroot-prefix tests framework

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-scripts/weak1.s: assembly failed

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-wince-pe  +FAIL: --entry foo archive

> arm-wince-pe  +FAIL: --entry foo -u foo archive

> arm-wince-pe  +FAIL: --entry foo

> arm-wince-pe  +FAIL: --entry foo -u foo

> arm-wince-pe  +FAIL: --entry 0x0

> arm-wince-pe  +ERROR:  /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/entry.s: assembly failed

> arm-wince-pe  +FAIL: Check require-defined with an undefined symbol

> arm-wince-pe  +FAIL: Check require-defined can require a symbol from an object

> arm-wince-pe  +FAIL: Check require-defined does no error on a defined symbol

> arm-wince-pe  +FAIL: Check require-defined can require a symbol from an archive

> arm-wince-pe  +FAIL: Check require-defined can require two symbols

> arm-wince-pe  +ERROR: /home/alan/src/binutils-gdb/ld/testsuite/ld-undefined/weak-undef.s: assembly failed

> 

>

Patch

diff --git a/gas/config/tc-arm.c b/gas/config/tc-arm.c
index cac4ed9ab9712735bc8b3fb438add6267e2c0e51..f431b7ae1ebcae20bfceda77d402d74609c16f7e 100644
--- a/gas/config/tc-arm.c
+++ b/gas/config/tc-arm.c
@@ -123,7 +123,12 @@  enum arm_float_abi
 
 #define streq(a, b)	      (strcmp (a, b) == 0)
 
+/* Current set of feature bits available (CPU+FPU).  Different from
+   selected_cpu + selected_fpu in case of autodetection since the CPU
+   feature bits are then all set.  */
 static arm_feature_set cpu_variant;
+/* Feature bits used in each execution state.  Used to set build attribute
+   (in particular Tag_*_ISA_use) in CPU autodetection mode.  */
 static arm_feature_set arm_arch_used;
 static arm_feature_set thumb_arch_used;
 
@@ -143,17 +148,24 @@  bfd_boolean codecomposer_syntax = FALSE;
 /* Variables that we set while parsing command-line options.  Once all
    options have been read we re-process these values to set the real
    assembly flags.  */
-static const arm_feature_set *  legacy_cpu = NULL;
-static const arm_feature_set *  legacy_fpu = NULL;
-
-static const arm_feature_set *  mcpu_cpu_opt = NULL;
-static arm_feature_set *        dyn_mcpu_ext_opt = NULL;
-static const arm_feature_set *  mcpu_fpu_opt = NULL;
-static const arm_feature_set *  march_cpu_opt = NULL;
-static arm_feature_set *        dyn_march_ext_opt = NULL;
-static const arm_feature_set *  march_fpu_opt = NULL;
-static const arm_feature_set *  mfpu_opt = NULL;
-static const arm_feature_set *  object_arch = NULL;
+
+/* CPU and FPU feature bits set for legacy CPU and FPU options (eg. -marm1
+   instead of -mcpu=arm1).  */
+static const arm_feature_set *legacy_cpu = NULL;
+static const arm_feature_set *legacy_fpu = NULL;
+
+/* CPU, extension and FPU feature bits selected by -mcpu.  */
+static const arm_feature_set *mcpu_cpu_opt = NULL;
+static arm_feature_set *mcpu_ext_opt = NULL;
+static const arm_feature_set *mcpu_fpu_opt = NULL;
+
+/* CPU, extension and FPU feature bits selected by -march.  */
+static const arm_feature_set *march_cpu_opt = NULL;
+static arm_feature_set *march_ext_opt = NULL;
+static const arm_feature_set *march_fpu_opt = NULL;
+
+/* Feature bits selected by -mfpu.  */
+static const arm_feature_set *mfpu_opt = NULL;
 
 /* Constants for known architecture features.  */
 static const arm_feature_set fpu_default = FPU_DEFAULT;
@@ -302,8 +314,20 @@  static const arm_feature_set fpu_neon_ext_dotprod =
   ARM_FEATURE_COPROC (FPU_NEON_EXT_DOTPROD);
 
 static int mfloat_abi_opt = -1;
-/* Record user cpu selection for object attributes.  */
+/* Architecture feature bits selected by the last -mcpu/-march or .cpu/.arch
+   directive.  */
+static arm_feature_set selected_arch = ARM_ARCH_NONE;
+/* Extension feature bits selected by the last -mcpu/-march or .arch_extension
+   directive.  */
+static arm_feature_set selected_ext = ARM_ARCH_NONE;
+/* Feature bits selected by the last -mcpu/-march or by the combination of the
+   last .cpu/.arch directive .arch_extension directives since that
+   directive.  */
 static arm_feature_set selected_cpu = ARM_ARCH_NONE;
+/* FPU feature bits selected by the last -mfpu or .fpu directive.  */
+static arm_feature_set selected_fpu = FPU_NONE;
+/* Feature bits selected by the last .object_arch directive.  */
+static arm_feature_set selected_object_arch = ARM_ARCH_NONE;
 /* Must be long enough to hold any of the names in arm_cpus.  */
 static char selected_cpu_name[20];
 
@@ -8610,7 +8634,8 @@  do_bx (void)
   /* Output R_ARM_V4BX relocations if is an EABI object that looks like
      it is for ARMv4t or earlier.  */
   want_reloc = !ARM_CPU_HAS_FEATURE (selected_cpu, arm_ext_v5);
-  if (object_arch && !ARM_CPU_HAS_FEATURE (*object_arch, arm_ext_v5))
+  if (!ARM_FEATURE_ZERO (selected_object_arch)
+      && !ARM_CPU_HAS_FEATURE (selected_object_arch, arm_ext_v5))
       want_reloc = TRUE;
 
 #ifdef OBJ_ELF
@@ -25338,71 +25363,70 @@  md_begin (void)
       if (mcpu_cpu_opt || march_cpu_opt)
 	as_bad (_("use of old and new-style options to set CPU type"));
 
-      mcpu_cpu_opt = legacy_cpu;
+      selected_arch = *legacy_cpu;
     }
-  else if (!mcpu_cpu_opt)
+  else if (mcpu_cpu_opt)
+    {
+      selected_arch = *mcpu_cpu_opt;
+      selected_ext = *mcpu_ext_opt;
+    }
+  else if (march_cpu_opt)
     {
-      mcpu_cpu_opt = march_cpu_opt;
-      dyn_mcpu_ext_opt = dyn_march_ext_opt;
-      /* Avoid double free in arm_md_end.  */
-      dyn_march_ext_opt = NULL;
+      selected_arch = *march_cpu_opt;
+      selected_ext = *march_ext_opt;
     }
+  ARM_MERGE_FEATURE_SETS (selected_cpu, selected_arch, selected_ext);
 
   if (legacy_fpu)
     {
       if (mfpu_opt)
 	as_bad (_("use of old and new-style options to set FPU type"));
 
-      mfpu_opt = legacy_fpu;
+      selected_fpu = *legacy_fpu;
     }
-  else if (!mfpu_opt)
+  else if (mfpu_opt)
+    selected_fpu = *mfpu_opt;
+  else
     {
 #if !(defined (EABI_DEFAULT) || defined (TE_LINUX) \
 	|| defined (TE_NetBSD) || defined (TE_VXWORKS))
       /* Some environments specify a default FPU.  If they don't, infer it
 	 from the processor.  */
       if (mcpu_fpu_opt)
-	mfpu_opt = mcpu_fpu_opt;
+	selected_fpu = *mcpu_fpu_opt;
       else
-	mfpu_opt = march_fpu_opt;
+	selected_fpu = *march_fpu_opt;
 #else
-      mfpu_opt = &fpu_default;
+      selected_fpu = fpu_default;
 #endif
     }
 
-  if (!mfpu_opt)
+  if (ARM_FEATURE_ZERO (selected_fpu))
     {
-      if (mcpu_cpu_opt != NULL)
-	mfpu_opt = &fpu_default;
-      else if (mcpu_fpu_opt != NULL && ARM_CPU_HAS_FEATURE (*mcpu_fpu_opt, arm_ext_v5))
-	mfpu_opt = &fpu_arch_vfp_v2;
+      if (!no_cpu_selected ())
+	selected_fpu = fpu_default;
       else
-	mfpu_opt = &fpu_arch_fpa;
+	selected_fpu = fpu_arch_fpa;
     }
 
 #ifdef CPU_DEFAULT
-  if (!mcpu_cpu_opt)
+  if (ARM_FEATURE_ZERO (selected_arch))
     {
-      mcpu_cpu_opt = &cpu_default;
-      selected_cpu = cpu_default;
+      selected_arch = cpu_default;
+      selected_cpu = selected_arch;
     }
-  else if (dyn_mcpu_ext_opt)
-    ARM_MERGE_FEATURE_SETS (selected_cpu, *mcpu_cpu_opt, *dyn_mcpu_ext_opt);
-  else
-    selected_cpu = *mcpu_cpu_opt;
+  ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 #else
-  if (mcpu_cpu_opt && dyn_mcpu_ext_opt)
-    ARM_MERGE_FEATURE_SETS (selected_cpu, *mcpu_cpu_opt, *dyn_mcpu_ext_opt);
-  else if (mcpu_cpu_opt)
-    selected_cpu = *mcpu_cpu_opt;
+  /*  Autodection of feature mode: allow all features in cpu_variant but leave
+      selected_cpu unset.  It will be set in aeabi_set_public_attributes ()
+      after all instruction have been processed and we can decide what CPU
+      should be selected.  */
+  if (ARM_FEATURE_ZERO (selected_arch))
+    ARM_MERGE_FEATURE_SETS (cpu_variant, arm_arch_any, selected_fpu);
   else
-    mcpu_cpu_opt = &arm_arch_any;
+    ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 #endif
 
-  ARM_MERGE_FEATURE_SETS (cpu_variant, *mcpu_cpu_opt, *mfpu_opt);
-  if (dyn_mcpu_ext_opt)
-    ARM_MERGE_FEATURE_SETS (cpu_variant, cpu_variant, *dyn_mcpu_ext_opt);
-
   autoselect_thumb_from_cpu_variant ();
 
   arm_arch_used = thumb_arch_used = arm_arch_none;
@@ -26430,7 +26454,7 @@  struct arm_long_option_table
 
 static bfd_boolean
 arm_parse_extension (const char *str, const arm_feature_set *opt_set,
-		     arm_feature_set **ext_set_p)
+		     arm_feature_set *ext_set)
 {
   /* We insist on extensions being specified in alphabetical order, and with
      extensions being added before being removed.  We achieve this by having
@@ -26442,12 +26466,6 @@  arm_parse_extension (const char *str, const arm_feature_set *opt_set,
   const arm_feature_set arm_any = ARM_ANY;
   int adding_value = -1;
 
-  if (!*ext_set_p)
-    {
-      *ext_set_p = XNEW (arm_feature_set);
-      **ext_set_p = arm_arch_none;
-    }
-
   while (str != NULL && *str != 0)
     {
       const char *ext;
@@ -26525,10 +26543,9 @@  arm_parse_extension (const char *str, const arm_feature_set *opt_set,
 
 	    /* Add or remove the extension.  */
 	    if (adding_value)
-	      ARM_MERGE_FEATURE_SETS (**ext_set_p, **ext_set_p,
-				      opt->merge_value);
+	      ARM_MERGE_FEATURE_SETS (*ext_set, *ext_set, opt->merge_value);
 	    else
-	      ARM_CLEAR_FEATURE (**ext_set_p, **ext_set_p, opt->clear_value);
+	      ARM_CLEAR_FEATURE (*ext_set, *ext_set, opt->clear_value);
 
 	    /* Allowing Thumb division instructions for ARMv7 in autodetection
 	       rely on this break so that duplicate extensions (extensions
@@ -26589,9 +26606,9 @@  arm_parse_cpu (const char *str)
     if (opt->name_len == len && strncmp (opt->name, str, len) == 0)
       {
 	mcpu_cpu_opt = &opt->value;
-	if (!dyn_mcpu_ext_opt)
-	  dyn_mcpu_ext_opt = XNEW (arm_feature_set);
-	*dyn_mcpu_ext_opt = opt->ext;
+	if (mcpu_ext_opt == NULL)
+	  mcpu_ext_opt = XNEW (arm_feature_set);
+	*mcpu_ext_opt = opt->ext;
 	mcpu_fpu_opt = &opt->default_fpu;
 	if (opt->canonical_name)
 	  {
@@ -26611,7 +26628,7 @@  arm_parse_cpu (const char *str)
 	  }
 
 	if (ext != NULL)
-	  return arm_parse_extension (ext, mcpu_cpu_opt, &dyn_mcpu_ext_opt);
+	  return arm_parse_extension (ext, mcpu_cpu_opt, mcpu_ext_opt);
 
 	return TRUE;
       }
@@ -26642,11 +26659,14 @@  arm_parse_arch (const char *str)
     if (opt->name_len == len && strncmp (opt->name, str, len) == 0)
       {
 	march_cpu_opt = &opt->value;
+	if (march_ext_opt == NULL)
+	  march_ext_opt = XNEW (arm_feature_set);
+	*march_ext_opt = arm_arch_none;
 	march_fpu_opt = &opt->default_fpu;
 	strcpy (selected_cpu_name, opt->name);
 
 	if (ext != NULL)
-	  return arm_parse_extension (ext, march_cpu_opt, &dyn_march_ext_opt);
+	  return arm_parse_extension (ext, march_cpu_opt, march_ext_opt);
 
 	return TRUE;
       }
@@ -27138,26 +27158,31 @@  aeabi_set_public_attributes (void)
 	ARM_MERGE_FEATURE_SETS (flags, flags, arm_ext_v4t);
 
       /* Code run during relaxation relies on selected_cpu being set.  */
+      ARM_CLEAR_FEATURE (flags_arch, flags, fpu_any);
+      flags_ext = arm_arch_none;
+      ARM_CLEAR_FEATURE (selected_arch, flags_arch, flags_ext);
+      selected_ext = flags_ext;
       selected_cpu = flags;
     }
   /* Otherwise, choose the architecture based on the capabilities of the
      requested cpu.  */
   else
-    flags = selected_cpu;
-  ARM_MERGE_FEATURE_SETS (flags, flags, *mfpu_opt);
+    {
+      ARM_MERGE_FEATURE_SETS (flags_arch, selected_arch, selected_ext);
+      ARM_CLEAR_FEATURE (flags_arch, flags_arch, fpu_any);
+      flags_ext = selected_ext;
+      flags = selected_cpu;
+    }
+  ARM_MERGE_FEATURE_SETS (flags, flags, selected_fpu);
 
   /* Allow the user to override the reported architecture.  */
-  if (object_arch)
+  if (!ARM_FEATURE_ZERO (selected_object_arch))
     {
-      ARM_CLEAR_FEATURE (flags_arch, *object_arch, fpu_any);
+      ARM_CLEAR_FEATURE (flags_arch, selected_object_arch, fpu_any);
       flags_ext = arm_arch_none;
     }
   else
-    {
-      ARM_CLEAR_FEATURE (flags_arch, flags, fpu_any);
-      flags_ext = dyn_mcpu_ext_opt ? *dyn_mcpu_ext_opt : arm_arch_none;
-      skip_exact_match = ARM_FEATURE_EQUAL (selected_cpu, arm_arch_any);
-    }
+    skip_exact_match = ARM_FEATURE_EQUAL (selected_cpu, arm_arch_any);
 
   /* When this function is run again after relaxation has happened there is no
      way to determine whether an architecture or CPU was specified by the user:
@@ -27198,7 +27223,7 @@  aeabi_set_public_attributes (void)
     aeabi_set_attribute_int (Tag_CPU_arch_profile, profile);
 
   /* Tag_DSP_extension.  */
-  if (dyn_mcpu_ext_opt && ARM_CPU_HAS_FEATURE (*dyn_mcpu_ext_opt, arm_ext_dsp))
+  if (ARM_CPU_HAS_FEATURE (selected_ext, arm_ext_dsp))
     aeabi_set_attribute_int (Tag_DSP_extension, 1);
 
   ARM_CLEAR_FEATURE (flags_arch, flags, fpu_any);
@@ -27321,10 +27346,10 @@  void
 arm_md_post_relax (void)
 {
   aeabi_set_public_attributes ();
-  XDELETE (dyn_mcpu_ext_opt);
-  dyn_mcpu_ext_opt = NULL;
-  XDELETE (dyn_march_ext_opt);
-  dyn_march_ext_opt = NULL;
+  XDELETE (mcpu_ext_opt);
+  mcpu_ext_opt = NULL;
+  XDELETE (march_ext_opt);
+  march_ext_opt = NULL;
 }
 
 /* Add the default contents for the .ARM.attributes section.  */
@@ -27358,11 +27383,9 @@  s_arm_cpu (int ignored ATTRIBUTE_UNUSED)
   for (opt = arm_cpus + 1; opt->name != NULL; opt++)
     if (streq (opt->name, name))
       {
-	mcpu_cpu_opt = &opt->value;
-	if (!dyn_mcpu_ext_opt)
-	  dyn_mcpu_ext_opt = XNEW (arm_feature_set);
-	*dyn_mcpu_ext_opt = opt->ext;
-	ARM_MERGE_FEATURE_SETS (selected_cpu, *mcpu_cpu_opt, *dyn_mcpu_ext_opt);
+	selected_arch = opt->value;
+	selected_ext = opt->ext;
+	ARM_MERGE_FEATURE_SETS (selected_cpu, selected_arch, selected_ext);
 	if (opt->canonical_name)
 	  strcpy (selected_cpu_name, opt->canonical_name);
 	else
@@ -27373,9 +27396,8 @@  s_arm_cpu (int ignored ATTRIBUTE_UNUSED)
 
 	    selected_cpu_name[i] = 0;
 	  }
-	ARM_MERGE_FEATURE_SETS (cpu_variant, *mcpu_cpu_opt, *mfpu_opt);
-	if (dyn_mcpu_ext_opt)
-	  ARM_MERGE_FEATURE_SETS (cpu_variant, cpu_variant, *dyn_mcpu_ext_opt);
+	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
+
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	return;
@@ -27404,12 +27426,11 @@  s_arm_arch (int ignored ATTRIBUTE_UNUSED)
   for (opt = arm_archs + 1; opt->name != NULL; opt++)
     if (streq (opt->name, name))
       {
-	mcpu_cpu_opt = &opt->value;
-	XDELETE (dyn_mcpu_ext_opt);
-	dyn_mcpu_ext_opt = NULL;
-	selected_cpu = *mcpu_cpu_opt;
+	selected_arch = opt->value;
+	selected_ext = arm_arch_none;
+	selected_cpu = selected_arch;
 	strcpy (selected_cpu_name, opt->name);
-	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, *mfpu_opt);
+	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	return;
@@ -27439,7 +27460,7 @@  s_arm_object_arch (int ignored ATTRIBUTE_UNUSED)
   for (opt = arm_archs + 1; opt->name != NULL; opt++)
     if (streq (opt->name, name))
       {
-	object_arch = &opt->value;
+	selected_object_arch = opt->value;
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	return;
@@ -27456,7 +27477,6 @@  static void
 s_arm_arch_extension (int ignored ATTRIBUTE_UNUSED)
 {
   const struct arm_option_extension_value_table *opt;
-  const arm_feature_set arm_any = ARM_ANY;
   char saved_char;
   char *name;
   int adding_value = 1;
@@ -27482,9 +27502,9 @@  s_arm_arch_extension (int ignored ATTRIBUTE_UNUSED)
 	for (i = 0; i < nb_allowed_archs; i++)
 	  {
 	    /* Empty entry.  */
-	    if (ARM_FEATURE_EQUAL (opt->allowed_archs[i], arm_any))
+	    if (ARM_CPU_IS_ANY (opt->allowed_archs[i]))
 	      continue;
-	    if (ARM_FSET_CPU_SUBSET (opt->allowed_archs[i], *mcpu_cpu_opt))
+	    if (ARM_FSET_CPU_SUBSET (opt->allowed_archs[i], selected_arch))
 	      break;
 	  }
 
@@ -27495,20 +27515,14 @@  s_arm_arch_extension (int ignored ATTRIBUTE_UNUSED)
 	    break;
 	  }
 
-	if (!dyn_mcpu_ext_opt)
-	  {
-	    dyn_mcpu_ext_opt = XNEW (arm_feature_set);
-	    *dyn_mcpu_ext_opt = arm_arch_none;
-	  }
 	if (adding_value)
-	  ARM_MERGE_FEATURE_SETS (*dyn_mcpu_ext_opt, *dyn_mcpu_ext_opt,
+	  ARM_MERGE_FEATURE_SETS (selected_ext, selected_ext,
 				  opt->merge_value);
 	else
-	  ARM_CLEAR_FEATURE (*dyn_mcpu_ext_opt, *dyn_mcpu_ext_opt,
-			     opt->clear_value);
+	  ARM_CLEAR_FEATURE (selected_ext, selected_ext, opt->clear_value);
 
-	ARM_MERGE_FEATURE_SETS (selected_cpu, *mcpu_cpu_opt, *dyn_mcpu_ext_opt);
-	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, *mfpu_opt);
+	ARM_MERGE_FEATURE_SETS (selected_cpu, selected_arch, selected_ext);
+	ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	/* Allowing Thumb division instructions for ARMv7 in autodetection rely
@@ -27543,10 +27557,13 @@  s_arm_fpu (int ignored ATTRIBUTE_UNUSED)
   for (opt = arm_fpus; opt->name != NULL; opt++)
     if (streq (opt->name, name))
       {
-	mfpu_opt = &opt->value;
-	ARM_MERGE_FEATURE_SETS (cpu_variant, *mcpu_cpu_opt, *mfpu_opt);
-	if (dyn_mcpu_ext_opt)
-	  ARM_MERGE_FEATURE_SETS (cpu_variant, cpu_variant, *dyn_mcpu_ext_opt);
+	selected_fpu = opt->value;
+#ifndef CPU_DEFAULT
+	if (no_cpu_selected ())
+	  ARM_MERGE_FEATURE_SETS (cpu_variant, arm_arch_any, selected_fpu);
+	else
+#endif
+	  ARM_MERGE_FEATURE_SETS (cpu_variant, selected_cpu, selected_fpu);
 	*input_line_pointer = saved_char;
 	demand_empty_rest_of_line ();
 	return;